Bexley · DA17 · Handyman
Handyman in Belvedere, DA17
Handyman in Belvedere, DA17, in Bexley: post-war semis with drives, victorian terraces and new riverside housing, so the walls here are lath and plaster over timber studs, with solid brick on the party and external walls. The list we are booked for most is alcove shelving and a TV bracket, both fixed through the plaster into something solid, and the failure we are called back to fix is a plasterboard plug spun into lime plaster, which crumbles the key and drops the panel.
- Trustpilot 4.5· 3,100+ reviews
- Google 3.9· 1,429 reviews
- £1m public liability
- Licensed waste carrier CBDU300454
- Since 2019
- £55 an hour, £190 a half day — fixed price for the whole list
- Lath and plaster here, so the fixings are chosen for the wall, not pulled from a pack
- Stud, pipe and cable scan before the first hole, every visit
- London Borough of Bexley permits, ULEZ and packaging removal already inside the price
The service, locally
Handyman work in Belvedere
- Per hour, one-hour minimum
- £55Per hour, one-hour minimum
- Belvedere homes are flats
- 48%Belvedere homes are flats
- Fixed-price jobs
- 14Fixed-price jobs
- Households in Belvedere
- 3,983Households in Belvedere
Instant estimate
Price your Belvedere job list
Estimated for Belvedere DA17
£120 – £350
Slot needed: Half day
- Shelves and floating units
- £65 – £180
- Curtain poles and blinds
- £60 – £150
- One-visit saving
- −£25
- Lath, dot-and-dab or concrete fixings
- from £20
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. You have told us the walls are lath, dot-and-dab or concrete, so we have allowed for the correct anchors and the extra scanning time that goes with them.
How it works
How a Belvedere visit works
- Photos and a listPhotos of each wall and a list of jobs get one fixed written price for Belvedere DA17 the same working day.
- We scan, then drillNothing is drilled blind: we scan, mark, protect the floor and choose for lath and plaster.
- Signed off with youEvery fixing load-tested, packaging taken away, and a walk-round with you before we leave.
- Get my price
Walls and fixings
What is behind the plaster in Belvedere
Most likely here
Lath and plaster — Pre-1930 terraces and mansion blocks
Locate the timber lath studs, fix through into the stud with 5 × 80 mm screws. Realistic load: up to 25 kg into a stud, nothing into the plaster itself. What goes wrong: a plasterboard plug in lime plaster crumbles the key and drops the whole panel.
Lath and plaster
Pre-1930 terraces and mansion blocks
- Fixing
- Locate the timber lath studs, fix through into the stud with 5 × 80 mm screws
- Safe load
- Up to 25 kg into a stud, nothing into the plaster itself
- What pulls out
- A plasterboard plug in lime plaster crumbles the key and drops the whole panel
Solid London stock brick
Victorian and Edwardian party and external walls
- Fixing
- 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor
- Safe load
- 40 kg-plus per fixing when anchored into brick, not mortar
- What pulls out
- Fixing into soft lime mortar joints, which spin out under load
Dot-and-dab plasterboard
1990s onward new builds and conversions
- Fixing
- Long fixings through the void into the blockwork behind, or a spread-load anchor
- Safe load
- 30 kg with a through-fixing, 8 kg on a hollow-wall anchor alone
- What pulls out
- Short screws that only grip the board, then lever it off the dabs
Timber or metal stud partition
Flat conversions and 1960s-onward internal walls
- Fixing
- Stud detector, then fix into the upright; noggins added where the stud misses
- Safe load
- 35 kg into timber, 15 kg into metal stud with a toggle
- What pulls out
- Two of four bracket holes on the stud and two in fresh air
Precast concrete and blockwork
Post-war estates and podium blocks
- Fixing
- SDS drill, 8 mm hole, sleeve anchor or screwbolt
- Safe load
- 50 kg-plus per fixing
- What pulls out
- Hitting reinforcement or a buried conduit without a scan first
Insulated dry lining
Retrofitted period homes and low-energy refurbishments
- Fixing
- Insulation-rated frame fixings that reach the masonry beyond the board and foam
- Safe load
- 25 kg, spread across four points
- What pulls out
- Compressing the insulation so the fixing slowly works loose
Why Hello Services
Why Hello Services in Belvedere
Permits and parking included
London Borough of Bexley visitor permits and suspensions are arranged and paid for by us on the Belvedere rounds.
Fixings and filler included
Screws, plugs, resin, silicone and filler come from the van, not from your invoice around Belvedere (Southeastern).
Packaging leaves with us
Flat-pack cardboard, polystyrene and old fittings go in the van at the end of the DA17 visit in Belvedere, with this being London Borough of Bexley territory.
DBS-checked and insured
£1m public liability and a tradesperson you would be happy to leave in the flat on the Belvedere rounds.
Fixed prices
Handyman prices in Belvedere
| Job | From | To | Time on site | What it covers |
|---|---|---|---|---|
| Door easing, hinges and closers | £55 | £140 | 1–2 hrs | Sticking doors planed and rehung, hinges packed, closers and stops fitted |
| Shelves and floating units | £65 | £180 | 1–3 hrs | Alcove shelving, floating shelves and brackets set to a laser line |
| Locks, handles and door furniture | £70 | £160 | 1–2 hrs | Euro cylinders, mortice locks, thumb turns and handles swapped like for like |
| Radiator bleeding and TRV swaps | £60 | £140 | 1–2 hrs | System bled through, thermostatic valve heads replaced, pressure topped up |
| Flat-pack assembly | £55 | £190 | 1–4 hrs | Wardrobes, beds, desks and drawer units built, levelled and anchored to the wall |
| Taps, washers and waste traps | £65 | £150 | 1–2 hrs | Dripping taps, isolation valves, sink and basin traps and flexible tails |
Door easing, hinges and closers
£55 – £140
1–2 hrs
Sticking doors planed and rehung, hinges packed, closers and stops fitted
Shelves and floating units
£65 – £180
1–3 hrs
Alcove shelving, floating shelves and brackets set to a laser line
Locks, handles and door furniture
£70 – £160
1–2 hrs
Euro cylinders, mortice locks, thumb turns and handles swapped like for like
Radiator bleeding and TRV swaps
£60 – £140
1–2 hrs
System bled through, thermostatic valve heads replaced, pressure topped up
Flat-pack assembly
£55 – £190
1–4 hrs
Wardrobes, beds, desks and drawer units built, levelled and anchored to the wall
Taps, washers and waste traps
£65 – £150
1–2 hrs
Dripping taps, isolation valves, sink and basin traps and flexible tails
Belvedere DA17 books this 6-job shortlist more than anything else, because 52% of homes here are houses. All 14 fixed prices sit on the shared reference page.
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. Full price list, fixings matrix and scope policy.
Rates and local costs
Hourly, half day or full day in Belvedere
Hourly rate
£55
per hour, one-hour minimum
Best for one or two small jobs — a shelf, a leaking tap washer, a sticking door.
Half day
£190
up to 4 hours
The most-booked slot in London: three to six jobs from one list, one visit, one price.
Full day
£340
up to 8 hours
A snag list, a whole-flat furniture build, or a move-in day of fixings and fittings.
Same-day call-out
£95
first hour, then hourly
Lock, leak, door or safety job that cannot wait for a booked slot.
- Parking and permits
- London Borough of Bexley visitor permits and bay suspensions are arranged, paid for by us and already inside the quoted figure.
- Charging zones
- Bexley sits outside the Congestion Charge zone and inside ULEZ. Our vans are compliant, so ULEZ never appear on your invoice.
- Access and building rules
- Concierge sign-in, goods-lift booking and out-of-hours windows are handled before the visit, so the clock starts when the work does, not in reception.
Screws, plugs, resin anchors, hollow-wall fixings, silicone and filler come out of the van and are inside the price. Anything bought for you — a replacement tap, a door closer, a specific bracket — is charged at cost with the receipt attached to your invoice.
Scope
What is included in Belvedere
Included in every visit
- One vetted fitter for the whole Belvedere DA17 list, with ladders, tools and sheets already in the van.
- Locate the timber lath studs, fix through into the stud with 5 × 80 mm screws and the rest of our van stock, because lath and plaster is what most DA17 fixings go into.
- Scanning, levelling and load-testing on every hole — plus packaging and old fittings taken away.
- Access worked out in advance for Belvedere DA17, with London Borough of Bexley permits and charges already inside the price.
Not included — and why
- Gas work of any kind: that is Gas Safe registered work, and we say so before you book, not on the day.
- Part P notifiable electrics — new circuits and boards — go to a registered electrician, not a handyman.
- Anything structural in Belvedere DA17: that route starts with London Borough of Bexley building control, and we will point you there.
- Any fixing that would disturb possible asbestos, which is surveyed first as a matter of policy.
The full scope policy, the complete fixings matrix and every fixed price sit on one page: handyman reference.
Coverage
Handyman work around Belvedere
Nearby areas we also cover
Guides
Read before you book
Hiring a handyman in the UK: the complete guide
Scope, legal limits, 2026 prices, vetting questions, wall fixings and a job-list method that gets more done in one visit.
18 min read
Handyman prices in London: what jobs actually cost in 2026
Hourly, half-day and fixed job prices, with the London extras that quietly add to a quote.
9 min read
What a handyman can and cannot legally do in the UK
The real line between handyman work and jobs that need a registered electrician, gas or structural trade.
7 min read
Wall fixings guide: which anchor holds in which London wall
The fixing that actually holds in each London wall type, and the realistic load it will take.
8 min read
Related services
Other work we do in Belvedere
End of tenancy cleaning
Fixing holes filled and touched in, then the whole Belvedere flat cleaned for check-out.
One-off deep cleaning
A DA17 reset after the drilling, sanding and flat-pack dust has settled.
After builders cleaning
Snag list finished by us, then the builders' dust taken out of the Belvedere flat.
Moving services
Furniture dismantled in DA17, moved, then rebuilt and re-anchored the same day.
House removals
A full Belvedere move where the beds and wardrobes come apart and go back together properly.
House clearance
Old furniture and broken fittings taken away from DA17 before the new ones go up.
About the area
Belvedere in context
Most of Belvedere reads the same way from the pavement: post-war semis with drives, victorian terraces and new riverside housing. lath and plaster over timber studs is what we meet most in DA17, and Crossness Pumping Station and Belvedere Splash Park is the fixed point crews route by.
Belvedere reads as riverside industry, Lesnes Abbey woods above and quiet residential streets between, and the walls follow the stock. Post-war semis with drives, Victorian terraces and new riverside housing. That puts lath and plaster behind most fixings we make in DA17. That substrate wants locate the timber lath studs, fix through into the stud with 5 × 80 mm screws; anything lighter is a call-back, and even done properly the sensible limit is up to 25 kg into a stud, nothing into the plaster itself.
Tenure shapes the list too: 29% of homes here are privately rented and 50% owner-occupied, so we move between check-out make-good in DA17 lets and long-planned improvements in the same week. Wide roads with driveways; the riverside industrial roads carry heavy traffic. Nearest arrival point for the team is Belvedere (Southeastern), and bexley sits outside the Congestion Charge zone and inside ULEZ — none of it added to your invoice on the day.
- 3,983 households in Belvedere, 48% of them flats — the ratio that decides lift, stairs and drilling noise windows
- Lath and plaster dominates Belvedere, so the van carries the anchors that suit it, not a generic pack
- Van access and parking: wide roads with driveways
- Covering DA17 and the streets around Crossness Pumping Station and Belvedere Splash Park, from £55 an hour
Where Belvedere sits in our coverage
Everything we fit in Belvedere is booked through our handyman work in Bexley page, which sits under handyman work across London. The same crew works the adjoining postcodes too — handyman work in Erith DA8 (1.4 miles), handyman work in Abbey Wood SE2 (1.4 miles), handyman work in Thamesmead SE28 (2.2 miles), handyman work in Bexleyheath DA6 (2.2 miles) and handyman work in Crayford DA1 (3.7 miles). If your address sits on the boundary, book the closest page — the price and the crew are the same. For every trade we run at this postcode, see all services in Belvedere.
Most booked alongside this in Belvedere
Belvedere DA17 at a glance
- Area
- Belvedere, Bexley
- Postcodes served
- DA17
- Nearest station
- Belvedere (Southeastern)
- Dominant wall construction
- lath and plaster over timber studs, with solid brick on the party and external walls
- Fixing we use most
- Locate the timber lath studs, fix through into the stud with 5 × 80 mm screws
- Realistic load
- Up to 25 kg into a stud, nothing into the plaster itself
- Most-booked list
- alcove shelving and a TV bracket, both fixed through the plaster into something solid
- Watch out for
- a plasterboard plug spun into lime plaster, which crumbles the key and drops the panel
- Charging zones
- Bexley sits outside the Congestion Charge zone and inside ULEZ
- Residents (Belvedere)
- 10,231
- Households (Belvedere)
- 3,983
- Typical visit
- Half a day in DA17
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhood Belvedere & Lessness Heath (E02000067) — the published geography that covers Belvedere, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL).
Questions
Belvedere DA17 handyman questions
£55 an hour with a one-hour minimum, £190 for a half day and £340 for a full day in DA17 in this 48% flats neighbourhood, with 29% of DA17 homes being privately rented. Fixed-price jobs start at £55 — flat-pack from £55, TV mounting from £85, shelving from £65 on this side of Bexley, with Crossness Pumping Station and Belvedere Splash Park a few streets away. Send the list and we confirm one written figure in Belvedere.
Yes. Locally that usually means lath and plaster — locate the timber lath studs, fix through into the stud with 5 × 80 mm screws, holding around up to 25 kg into a stud, nothing into the plaster itself for Belvedere (DA17) addresses — and 20% social-rented stock nearby, with 48% of homes here being flats. The risk we guard against here is a plasterboard plug spun into lime plaster in this 48% flats neighbourhood, with 20% social-rented stock nearby, which crumbles the key and drops the panel. Every wall is scanned for studs, pipes and cables before the first hole on Bexley bookings.
That is how we prefer to work in Belvedere across DA17. Three or more jobs in one half-day slot means one set-up, one parking arrangement and one price of £190 rather than three separate call-outs on the streets near Crossness Pumping Station and Belvedere Splash Park, with Bexley parking rules in play. Photos of each DA17 wall let us sequence the list so the noisy drilling is done in one block on DA17 jobs, with 28% one-person households here.
Like-for-like socket faces, switches and light fittings, yes, tested on completion on Bexley bookings. We stop at Part P: no new circuits, no consumer units, no bathroom electrics on the Belvedere rounds. No gas work at all: that is Gas Safe territory and we say so on the phone rather than on the day for Belvedere (DA17) addresses, with 52% of Belvedere homes being houses.
Wide roads with driveways; the riverside industrial roads carry heavy traffic in this 48% flats neighbourhood. London Borough of Bexley visitor permits and bay suspensions are arranged and paid for by us and sit inside the quoted price on this side of Bexley, with 52% of Belvedere homes being houses. Concierge sign-in and goods-lift booking are done before the visit in Belvedere, with this being a short walk from Belvedere (Southeastern), so the clock starts when the work does.
Standard screws, plugs, resin and hollow-wall anchors, silicone and filler come out of the van and are already in the price around Belvedere (Southeastern), with 48% of homes here being flats. Loading for lath and plaster in advance is why a DA17 visit rarely needs a mid-job supply run in Belvedere, with this being London Borough of Bexley territory. If you want a specific part supplied, we buy it at cost and show you the receipt; there is no mark-up on this side of Bexley, with 28% one-person households here.
Yes. Every area in Bexley has its own page on Bexley bookings, and we cross borough boundaries constantly. If your address sits on the edge of DA17, book the nearest page and we will confirm the same fixed price on the streets near Crossness Pumping Station and Belvedere Splash Park, with 48% of homes here being flats.
Source: ONS Census 2021, borough totals via Nomis (table TS008, TS041, TS007A, TS044, TS054, TS003). Figures describe the whole borough, the smallest area ONS publishes every one of these tables for.
Book a handyman in Belvedere DA17
Send your job list and a photo of each wall for a fixed written price the same working day. Fixings, permits and taking the packaging away are already in the figure.
Handyman Services reviews from Greater London customers
4.5 ★ from 3,131 Trustpilot reviewsSulltan is the best handyman in London. He is very reliable and professional. I highly recommend.
Quick assembly of a big gas bbq . Friendly service too
Sulltan is the best handyman in London , Highly recommend ......
Read all 3 Handyman Services reviews from Greater London customers →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.