South London · Handyman
Handyman in Bexley
Handyman work in Bexley covers 7 areas, and the wall behind the plaster changes street by street. 25% of homes here are flats, so half the diary is conversion-flat lath and dot-and-dab board, and half is solid brick and timber stud. Every visit starts with a stud, pipe and cable scan.
- Trustpilot 4.5· 3,100+ reviews
- Google 3.9· 1,429 reviews
- £1m public liability
- Licensed waste carrier CBDU300454
- Since 2019
- 7 areas covered, each with its own page
- £55 an hour, £190 a half day, £340 a full day
- Fixings, filler and packaging removal inside every price
- London Borough of Bexley permits arranged and paid for by us
The service, locally
Handyman services across Bexley
- Areas covered
- 7Areas covered
- Homes that are flats
- 25%Homes that are flats
- Fixed-price jobs from
- £55Fixed-price jobs from
- Households
- 95,300Households
Instant estimate
Price your Bexley job list
Estimated for Bexley
£120 – £350
Slot needed: Half day
- Shelves and floating units
- £65 – £180
- Curtain poles and blinds
- £60 – £150
- One-visit saving
- −£25
- Lath, dot-and-dab or concrete fixings
- from £20
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. You have told us the walls are lath, dot-and-dab or concrete, so we have allowed for the correct anchors and the extra scanning time that goes with them.
How it works
How a Bexley visit works
- Tell us the whole listPhotos of each wall and a list of jobs get one fixed written price for Bexley the same working day.
- We scan, then drillEvery wall is scanned for studs, pipes and cables, sheets go down, and the fixing is matched to lath and plaster rather than pulled from a pack.
- Signed off with youWe load-test each fixing, take the cardboard and old fittings away, and walk the list with you — London Borough of Bexley permits already settled.
- Get my price
Walls and fixings
What is behind the plaster in Bexley
Most likely here
Lath and plaster — Pre-1930 terraces and mansion blocks
Locate the timber lath studs, fix through into the stud with 5 × 80 mm screws. Realistic load: up to 25 kg into a stud, nothing into the plaster itself. What goes wrong: a plasterboard plug in lime plaster crumbles the key and drops the whole panel.
Lath and plaster
Pre-1930 terraces and mansion blocks
- Fixing
- Locate the timber lath studs, fix through into the stud with 5 × 80 mm screws
- Safe load
- Up to 25 kg into a stud, nothing into the plaster itself
- What pulls out
- A plasterboard plug in lime plaster crumbles the key and drops the whole panel
Solid London stock brick
Victorian and Edwardian party and external walls
- Fixing
- 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor
- Safe load
- 40 kg-plus per fixing when anchored into brick, not mortar
- What pulls out
- Fixing into soft lime mortar joints, which spin out under load
Dot-and-dab plasterboard
1990s onward new builds and conversions
- Fixing
- Long fixings through the void into the blockwork behind, or a spread-load anchor
- Safe load
- 30 kg with a through-fixing, 8 kg on a hollow-wall anchor alone
- What pulls out
- Short screws that only grip the board, then lever it off the dabs
Timber or metal stud partition
Flat conversions and 1960s-onward internal walls
- Fixing
- Stud detector, then fix into the upright; noggins added where the stud misses
- Safe load
- 35 kg into timber, 15 kg into metal stud with a toggle
- What pulls out
- Two of four bracket holes on the stud and two in fresh air
Precast concrete and blockwork
Post-war estates and podium blocks
- Fixing
- SDS drill, 8 mm hole, sleeve anchor or screwbolt
- Safe load
- 50 kg-plus per fixing
- What pulls out
- Hitting reinforcement or a buried conduit without a scan first
Insulated dry lining
Retrofitted period homes and low-energy refurbishments
- Fixing
- Insulation-rated frame fixings that reach the masonry beyond the board and foam
- Safe load
- 25 kg, spread across four points
- What pulls out
- Compressing the insulation so the fixing slowly works loose
Fixed prices
Handyman prices in Bexley
| Job | From | To | Time on site | What it covers |
|---|---|---|---|---|
| Radiator bleeding and TRV swaps | £60 | £140 | 1–2 hrs | System bled through, thermostatic valve heads replaced, pressure topped up |
| Door easing, hinges and closers | £55 | £140 | 1–2 hrs | Sticking doors planed and rehung, hinges packed, closers and stops fitted |
| Shelves and floating units | £65 | £180 | 1–3 hrs | Alcove shelving, floating shelves and brackets set to a laser line |
| Filling and patching | £70 | £180 | 1–3 hrs | Old fixing holes filled and sanded ready for a check-out inspection |
Radiator bleeding and TRV swaps
£60 – £140
1–2 hrs
System bled through, thermostatic valve heads replaced, pressure topped up
Door easing, hinges and closers
£55 – £140
1–2 hrs
Sticking doors planed and rehung, hinges packed, closers and stops fitted
Shelves and floating units
£65 – £180
1–3 hrs
Alcove shelving, floating shelves and brackets set to a laser line
Filling and patching
£70 – £180
1–3 hrs
Old fixing holes filled and sanded ready for a check-out inspection
Bexley books this 8-job shortlist more than anything else, because 52% of homes here are houses. All 14 fixed prices sit on the shared reference page.
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. Full price list, fixings matrix and scope policy.
Why Hello Services
Why Hello Services in Bexley
Permits and parking included
London Borough of Bexley visitor permits and suspensions are arranged and paid for by us on the Belvedere rounds.
Fixings and filler included
Screws, plugs, resin, silicone and filler come from the van, not from your invoice around Belvedere (Southeastern).
Rates and local costs
Hourly, half day or full day in Bexley
Hourly rate
£55
per hour, one-hour minimum
Best for one or two small jobs — a shelf, a leaking tap washer, a sticking door.
Half day
£190
up to 4 hours
The most-booked slot in London: three to six jobs from one list, one visit, one price.
- Parking and permits
- London Borough of Bexley visitor permits and bay suspensions are arranged, paid for by us and already inside the quoted figure.
- Charging zones
- Bexley sits outside the Congestion Charge zone and inside ULEZ.
Screws, plugs, resin anchors, hollow-wall fixings, silicone and filler come out of the van and are inside the price. Anything bought for you — a replacement tap, a door closer, a specific bracket — is charged at cost with the receipt attached to your invoice.
Scope
What is included in Bexley
Included in every visit
- A DBS-checked, insured fitter arriving in Bexley with their own tools, ladders and dust sheets.
- Van-stock anchors chosen for lath and plaster, including Locate the timber lath studs, fix through into the stud with 5 × 80 mm screws, at no extra charge.
- Detector before drill, laser line rather than eye, and a load test on each fixing before we sign off.
- Parking, permits and any charge zone sorted with London Borough of Bexley by us, not added to your bill on the day.
Not included — and why
The full scope policy, the complete fixings matrix and every fixed price sit on one page: handyman reference.
Coverage
Handyman work around Bexley
Areas we cover across Bexley
- Handyman in BelvedereBelvedere (Southeastern)DA17
- Handyman in Bexley VillageBexley (Southeastern)DA5
- Handyman in BexleyheathBexleyheath (Southeastern)DA6
- Handyman in CrayfordCrayford (Southeastern)DA1
- Handyman in ErithErith (Southeastern)DA8
- Handyman in SidcupSidcup (Southeastern)DA15
- Handyman in WellingWelling (Southeastern)DA16
Guides
Read before you book
Related services
Other work we do in Bexley
End of tenancy cleaning
Fixing holes filled and touched in, then the whole Belvedere flat cleaned for check-out.
One-off deep cleaning
A DA17 reset after the drilling, sanding and flat-pack dust has settled.
After builders cleaning
Snag list finished by us, then the builders' dust taken out of the Belvedere flat.
About the borough
Bexley in context
Suburban south-east London by the Thames — Bexleyheath's shops, Sidcup's semis and Erith's riverside.
- 3,983 households in Belvedere, 48% of them flats — the ratio that decides lift, stairs and drilling noise windows
Bexley at a glance
- Postcodes served
- DA17
- Nearest station
- Belvedere (Southeastern)
- Dominant wall construction
- lath and plaster over timber studs, with solid brick on the party and external walls
- Fixing we use most
- Locate the timber lath studs, fix through into the stud with 5 × 80 mm screws
- Realistic load
- Up to 25 kg into a stud, nothing into the plaster itself
- Most-booked list
- alcove shelving and a TV bracket, both fixed through the plaster into something solid
- Watch out for
- a plasterboard plug spun into lime plaster, which crumbles the key and drops the panel
- Charging zones
- Bexley sits outside the Congestion Charge zone and inside ULEZ
- Residents (Belvedere)
- 10,231
- Households (Belvedere)
- 3,983
- Typical visit
- Half a day in DA17
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhood Belvedere & Lessness Heath (E02000067) — the published geography that covers Belvedere, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL).
Questions
Bexley handyman questions
£55 an hour with a one-hour minimum, £190 a half day, £340 a full day.
All 7 of them, each with its own page covering the housing stock, the wall construction that comes with it and the access reality for a van.
Yes. Snag lists, check-out make-good, safety fixings and void turnarounds are handled with before-and-after photos, an itemised invoice per property and one point of contact for a portfolio.
Source: ONS Census 2021, borough totals via Nomis (table TS008, TS041, TS007A, TS044, TS054, TS003). Figures describe the whole borough, the smallest area ONS publishes every one of these tables for.
Book a handyman in Bexley
Send your job list and a photo of each wall for a fixed written price the same working day. Fixings, permits and taking the packaging away are already in the figure.
Handyman Services reviews from Greater London customers
4.5 ★ from 3,131 Trustpilot reviewsSulltan is the best handyman in London. He is very reliable and professional. I highly recommend.
Quick assembly of a big gas bbq . Friendly service too
Sulltan is the best handyman in London , Highly recommend ......
Read all 3 Handyman Services reviews from Greater London customers →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.