Bexley · DA8 · Handyman
Handyman in Erith, DA8
In Erith (DA8) the job list usually starts with curtain poles, heavy mirrors and a full flat-pack wardrobe anchored to the wall. Riverside estate roads, tower blocks with single lifts and wide suburban streets behind. Behind the plaster you will find solid London stock brick, some of it dry-lined during a later refurbishment, each taking a different fixing.
- £55 an hour, £190 a half day — fixed price for the whole list
- Solid London stock brick here, so the fixings are chosen for the wall, not pulled from a pack
- Stud, pipe and cable scan before the first hole, every visit
- London Borough of Bexley permits, ULEZ and packaging removal already inside the price
The service, locally
Handyman work in Erith
- Per hour, one-hour minimum
- £55Per hour, one-hour minimum
- Erith homes are flats
- 43%Erith homes are flats
- Fixed-price jobs
- 14Fixed-price jobs
- Households in Erith
- 6,005Households in Erith
Instant estimate
Price your Erith job list
Estimated for Erith DA8
£90 – £255
Slot needed: One to two hours
- Curtain poles and blinds
- £60 – £150
- Mirrors, art and heavy hanging
- £55 – £130
- One-visit saving
- −£25
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. Batch the list into one visit and you pay for one set-up rather than three. Fixings, plugs and filler are already inside these figures.
How it works
How a Erith visit works
- Photos and a listPhotos of each wall and a list of jobs get one fixed written price for Erith DA8 the same working day.
- We scan, then drillNothing is drilled blind: we scan, mark, protect the floor and choose for solid london stock brick.
- Signed off with youEvery fixing load-tested, packaging taken away, and a walk-round with you before we leave.
- Get my price
Walls and fixings
What is behind the plaster in Erith
Most likely here
Solid London stock brick — Victorian and Edwardian party and external walls
7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor. Realistic load: 40 kg-plus per fixing when anchored into brick, not mortar. What goes wrong: fixing into soft lime mortar joints, which spin out under load.
Lath and plaster
Pre-1930 terraces and mansion blocks
- Fixing
- Locate the timber lath studs, fix through into the stud with 5 × 80 mm screws
- Safe load
- Up to 25 kg into a stud, nothing into the plaster itself
- What pulls out
- A plasterboard plug in lime plaster crumbles the key and drops the whole panel
Solid London stock brick
Victorian and Edwardian party and external walls
- Fixing
- 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor
- Safe load
- 40 kg-plus per fixing when anchored into brick, not mortar
- What pulls out
- Fixing into soft lime mortar joints, which spin out under load
Dot-and-dab plasterboard
1990s onward new builds and conversions
- Fixing
- Long fixings through the void into the blockwork behind, or a spread-load anchor
- Safe load
- 30 kg with a through-fixing, 8 kg on a hollow-wall anchor alone
- What pulls out
- Short screws that only grip the board, then lever it off the dabs
Timber or metal stud partition
Flat conversions and 1960s-onward internal walls
- Fixing
- Stud detector, then fix into the upright; noggins added where the stud misses
- Safe load
- 35 kg into timber, 15 kg into metal stud with a toggle
- What pulls out
- Two of four bracket holes on the stud and two in fresh air
Precast concrete and blockwork
Post-war estates and podium blocks
- Fixing
- SDS drill, 8 mm hole, sleeve anchor or screwbolt
- Safe load
- 50 kg-plus per fixing
- What pulls out
- Hitting reinforcement or a buried conduit without a scan first
Insulated dry lining
Retrofitted period homes and low-energy refurbishments
- Fixing
- Insulation-rated frame fixings that reach the masonry beyond the board and foam
- Safe load
- 25 kg, spread across four points
- What pulls out
- Compressing the insulation so the fixing slowly works loose
Why Hello Services
Why Hello Services in Erith
Photographed and load-tested
Each fixing tested and documented, so landlords and agents get evidence without asking.
We scan before we drill
Stud, pipe and cable detector on every Erith wall before the first hole — not after the leak.
One visit, one fixed price
Your whole DA8 list quoted in writing the same working day, with no doorstep re-quote.
The right anchor for the wall
We carry the lot, because fixings landing in soft lime mortar joints instead of the brick body is what a rushed job leaves behind.
Fixed prices
Handyman prices in Erith
| Job | From | To | Time on site | What it covers |
|---|---|---|---|---|
| Door easing, hinges and closers | £55 | £140 | 1–2 hrs | Sticking doors planed and rehung, hinges packed, closers and stops fitted |
| Radiator bleeding and TRV swaps | £60 | £140 | 1–2 hrs | System bled through, thermostatic valve heads replaced, pressure topped up |
| Shelves and floating units | £65 | £180 | 1–3 hrs | Alcove shelving, floating shelves and brackets set to a laser line |
| Filling and patch painting | £70 | £180 | 1–3 hrs | Old fixing holes filled, sanded and touched in ready for a check-out inspection |
| Locks, handles and door furniture | £70 | £160 | 1–2 hrs | Euro cylinders, mortice locks, thumb turns and handles swapped like for like |
| Taps, washers and waste traps | £65 | £150 | 1–2 hrs | Dripping taps, isolation valves, sink and basin traps and flexible tails |
Door easing, hinges and closers
£55 – £140
1–2 hrs
Sticking doors planed and rehung, hinges packed, closers and stops fitted
Radiator bleeding and TRV swaps
£60 – £140
1–2 hrs
System bled through, thermostatic valve heads replaced, pressure topped up
Shelves and floating units
£65 – £180
1–3 hrs
Alcove shelving, floating shelves and brackets set to a laser line
Filling and patch painting
£70 – £180
1–3 hrs
Old fixing holes filled, sanded and touched in ready for a check-out inspection
Locks, handles and door furniture
£70 – £160
1–2 hrs
Euro cylinders, mortice locks, thumb turns and handles swapped like for like
Taps, washers and waste traps
£65 – £150
1–2 hrs
Dripping taps, isolation valves, sink and basin traps and flexible tails
Erith DA8 books this 6-job shortlist more than anything else, because 57% of homes here are houses. All 14 fixed prices sit on the shared reference page.
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. Full price list, fixings matrix and scope policy.
Rates and local costs
Hourly, half day or full day in Erith
Hourly rate
£55
per hour, one-hour minimum
Best for one or two small jobs — a shelf, a leaking tap washer, a sticking door.
Half day
£190
up to 4 hours
The most-booked slot in London: three to six jobs from one list, one visit, one price.
Full day
£340
up to 8 hours
A snag list, a whole-flat furniture build, or a move-in day of fixings and fittings.
Same-day call-out
£95
first hour, then hourly
Lock, leak, door or safety job that cannot wait for a booked slot.
- Parking and permits
- London Borough of Bexley visitor permits and bay suspensions are arranged, paid for by us and already inside the quoted figure.
- Charging zones
- Bexley sits outside the Congestion Charge zone and inside ULEZ. Our vans are compliant, so ULEZ never appear on your invoice.
- Access and building rules
- Concierge sign-in, goods-lift booking and out-of-hours windows are handled before the visit, so the clock starts when the work does, not in reception.
Screws, plugs, resin anchors, hollow-wall fixings, silicone and filler come out of the van and are inside the price. Anything bought for you — a replacement tap, a door closer, a specific bracket — is charged at cost with the receipt attached to your invoice.
Scope
What is included in Erith
Included in every visit
- An insured, DBS-checked tradesperson who brings everything needed for a DA8 visit — tools, steps and floor protection.
- 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor and the rest of our van stock, because solid london stock brick is what most DA8 fixings go into.
- Scanning, levelling and load-testing on every hole — plus packaging and old fittings taken away.
- Parking, permits and any charge zone sorted with London Borough of Bexley by us, not added to your bill on the day.
Not included — and why
- Gas work of any kind: that is Gas Safe registered work, and we say so before you book, not on the day.
- New circuits or consumer units, which are notifiable under Part P and need a registered electrician.
- Load-bearing or structural changes, which need building control approval from London Borough of Bexley first.
- Any fixing that would disturb possible asbestos, which is surveyed first as a matter of policy.
The full scope policy, the complete fixings matrix and every fixed price sit on one page: handyman reference.
Coverage
Handyman work around Erith
Nearby areas we also cover
What customers say about handyman work
3.9 ★ from 1,412 Google reviewsI'm answering on behalf my wife who was & still is in hospital & can't get wifi , Your two gentlemen were absolutely brilliant very impressed with the results I'm hoping my wife will be home soon so she can see the results before I make a mess when I come from the garden. Eric… Read in full →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.
Guides
Read before you book
Hiring a handyman in the UK: the complete guide
Scope, legal limits, 2026 prices, vetting questions, wall fixings and a job-list method that gets more done in one visit.
18 min read
Handyman prices in London: what jobs actually cost in 2026
Hourly, half-day and fixed job prices, with the London extras that quietly add to a quote.
9 min read
What a handyman can and cannot legally do in the UK
The real line between handyman work and jobs that need a registered electrician, gas or structural trade.
7 min read
Wall fixings guide: which anchor holds in which London wall
The fixing that actually holds in each London wall type, and the realistic load it will take.
8 min read
Related services
Other work we do in Erith
End of tenancy cleaning
Fixing holes filled and touched in, then the whole Erith flat cleaned for check-out.
One-off deep cleaning
A DA8 reset after the drilling, sanding and flat-pack dust has settled.
After builders cleaning
Snag list finished by us, then the builders' dust taken out of the Erith flat.
Moving services
Furniture dismantled in DA8, moved, then rebuilt and re-anchored the same day.
House removals
A full Erith move where the beds and wardrobes come apart and go back together properly.
House clearance
Old furniture and broken fittings taken away from DA8 before the new ones go up.
About the area
Erith in context
Post-war estate housing, Victorian terraces and new riverside flats around Erith Pier — the longest on the Thames, and that stock decides the fixing: solid London stock brick first, everything else after. Riverside town with the pier, the marshes and a regenerating centre, so DA8 jobs reward a scan over a guess.
Erith reads as riverside town with the pier, the marshes and a regenerating centre, and the walls follow the stock. Post-war estate housing, Victorian terraces and new riverside flats. That puts solid london stock brick behind most fixings we make in DA8. That substrate wants 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor; anything lighter is a call-back, and even done properly the sensible limit is 40 kg-plus per fixing when anchored into brick, not mortar.
Tenure shapes the list too: 21% of homes here are privately rented and 57% owner-occupied, so we move between check-out make-good in DA8 lets and long-planned improvements in the same week. Riverside estate roads, tower blocks with single lifts and wide suburban streets behind. Nearest arrival point for the team is Erith (Southeastern), and bexley sits outside the Congestion Charge zone and inside ULEZ — none of it added to your invoice on the day.
- 43% flats, 57% houses across 6,005 Erith households (ONS Census 2021)
- Default fixing for Erith: 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor, load-tested to 40 kg-plus per fixing when anchored into brick, not mortar
- Access: riverside estate roads, tower blocks with single lifts and wide suburban streets behind
- We work the whole of DA8, including everything within walking distance of Erith Pier — the longest on the Thames
Where Erith sits in our coverage
Erith is one of the neighbourhoods on our handyman work in Bexley page, which sits under handyman work across London. Same-week crews working this postcode also cover handyman work in Belvedere (1.4 miles), handyman work in Bexleyheath (2.1 miles), handyman work in Crayford (2.4 miles), handyman work in Abbey Wood (2.7 miles) and handyman work in Thamesmead (3.6 miles). If your address sits on the boundary, book the closest page — the price and the crew are the same.
Erith DA8 at a glance
- Area
- Erith, Bexley
- Postcodes served
- DA8
- Nearest station
- Erith (Southeastern)
- Dominant wall construction
- solid London stock brick, some of it dry-lined during a later refurbishment
- Fixing we use most
- 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor
- Realistic load
- 40 kg-plus per fixing when anchored into brick, not mortar
- Most-booked list
- curtain poles, heavy mirrors and a full flat-pack wardrobe anchored to the wall
- Watch out for
- fixings landing in soft lime mortar joints instead of the brick body
- Charging zones
- Bexley sits outside the Congestion Charge zone and inside ULEZ
- Residents (Erith)
- 15,388
- Households (Erith)
- 6,005
- Typical visit
- Half a day in DA8
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhoods Erith East, Erith West (E02000068, E02000069) — the published geography that covers Erith, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL).
Questions
Erith DA8 handyman questions
£55 an hour with a one-hour minimum, £190 for a half day and £340 for a full day in DA8. Fixed-price jobs start at £55 — flat-pack from £55, TV mounting from £85, shelving from £65. Send the list and we confirm one written figure.
Yes. Locally that usually means solid london stock brick — 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor, holding around 40 kg-plus per fixing when anchored into brick, not mortar. The risk we guard against here is fixings landing in soft lime mortar joints instead of the brick body. Every wall is scanned for studs, pipes and cables before the first hole.
That is how we prefer to work in Erith. Once you are past three jobs, £190 for a half day beats paying the £55 hourly minimum three times over. Send photos of each wall with the list and the estimator on this page shows the one-visit saving before you book.
Swapping an existing socket face, switch or light fitting in Erith is fine, and it is tested before we leave. New circuits, consumer units and anything notifiable under Part P, no. Gas work of any kind is Gas Safe registered work and we will not touch it — we will tell you who should.
Riverside estate roads, tower blocks with single lifts and wide suburban streets behind. London Borough of Bexley visitor permits and bay suspensions are arranged and paid for by us and sit inside the quoted price. Concierge sign-in and goods-lift booking are done before the visit, so the clock starts when the work does.
The van carries the consumables — screws, plugs, resin, hollow-wall anchors, silicone, filler — and they are inside the DA8 figure you were quoted. Because solid london stock brick is what we expect here, the right anchors for it are on board before the van sets off. Anything specific bought for you is charged at cost with the receipt attached to the invoice.
Yes. Every area in Bexley has its own page, and we cross borough boundaries constantly. If your address sits on the edge of DA8, book the nearest page and we will confirm the same fixed price.
Source: ONS Census 2021, borough totals via Nomis (table TS008, TS041, TS007A, TS044, TS054, TS003). Figures describe the whole borough, the smallest area ONS publishes every one of these tables for.
Book a handyman in Erith DA8
Send your job list and a photo of each wall for a fixed written price the same working day. Fixings, permits and taking the packaging away are already in the figure.
What customers say about handyman work
3.9 ★ from 1,412 Google reviewsI'm answering on behalf my wife who was & still is in hospital & can't get wifi , Your two gentlemen were absolutely brilliant very impressed with the results I'm hoping my wife will be home soon so she can see the results before I make a mess when I come from the garden. Eric… Read in full →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.