Bexley · DA16 · Handyman
Handyman in Welling, DA16
**Odd jobs in Welling** (DA16, Bexley) are decided by what is behind the plaster: timber stud partitions inside, cavity brickwork outside. Most DA16 visits are a half-day job list — doors eased, blinds up, shelves fitted, taps re-washered. We scan for studs, pipes and cables before the first hole, every time.
- £55 an hour, £190 a half day — fixed price for the whole list
- Timber or metal stud partition here, so the fixings are chosen for the wall, not pulled from a pack
- Stud, pipe and cable scan before the first hole, every visit
- London Borough of Bexley permits, ULEZ and packaging removal already inside the price
The service, locally
Handyman work in Welling
- Per hour, one-hour minimum
- £55Per hour, one-hour minimum
- Welling homes are flats
- 19%Welling homes are flats
- Fixed-price jobs
- 14Fixed-price jobs
- Households in Welling
- 3,815Households in Welling
Instant estimate
Price your Welling job list
Estimated for Welling DA16
£85 – £305
Slot needed: One to two hours
- Flat-pack assembly
- £55 – £190
- Door easing, hinges and closers
- £55 – £140
- One-visit saving
- −£25
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. Batch the list into one visit and you pay for one set-up rather than three. Fixings, plugs and filler are already inside these figures.
How it works
How a Welling visit works
- Send your job listA photo per wall lets us read the substrate before quoting, so the Welling DA16 price we send is the price you pay.
- Detector out before the drillStud, pipe and cable detector out first, dust sheets down, then the anchor that suits timber or metal stud partition.
- Tested and tidiedFixings are tested, holes made good, waste leaves in the van, and you sign the list off on site.
- Get my price
Walls and fixings
What is behind the plaster in Welling
Most likely here
Timber or metal stud partition — Flat conversions and 1960s-onward internal walls
Stud detector, then fix into the upright; noggins added where the stud misses. Realistic load: 35 kg into timber, 15 kg into metal stud with a toggle. What goes wrong: two of four bracket holes on the stud and two in fresh air.
Lath and plaster
Pre-1930 terraces and mansion blocks
- Fixing
- Locate the timber lath studs, fix through into the stud with 5 × 80 mm screws
- Safe load
- Up to 25 kg into a stud, nothing into the plaster itself
- What pulls out
- A plasterboard plug in lime plaster crumbles the key and drops the whole panel
Solid London stock brick
Victorian and Edwardian party and external walls
- Fixing
- 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor
- Safe load
- 40 kg-plus per fixing when anchored into brick, not mortar
- What pulls out
- Fixing into soft lime mortar joints, which spin out under load
Dot-and-dab plasterboard
1990s onward new builds and conversions
- Fixing
- Long fixings through the void into the blockwork behind, or a spread-load anchor
- Safe load
- 30 kg with a through-fixing, 8 kg on a hollow-wall anchor alone
- What pulls out
- Short screws that only grip the board, then lever it off the dabs
Timber or metal stud partition
Flat conversions and 1960s-onward internal walls
- Fixing
- Stud detector, then fix into the upright; noggins added where the stud misses
- Safe load
- 35 kg into timber, 15 kg into metal stud with a toggle
- What pulls out
- Two of four bracket holes on the stud and two in fresh air
Precast concrete and blockwork
Post-war estates and podium blocks
- Fixing
- SDS drill, 8 mm hole, sleeve anchor or screwbolt
- Safe load
- 50 kg-plus per fixing
- What pulls out
- Hitting reinforcement or a buried conduit without a scan first
Insulated dry lining
Retrofitted period homes and low-energy refurbishments
- Fixing
- Insulation-rated frame fixings that reach the masonry beyond the board and foam
- Safe load
- 25 kg, spread across four points
- What pulls out
- Compressing the insulation so the fixing slowly works loose
Fixed prices
Handyman prices in Welling
| Job | From | To | Time on site | What it covers |
|---|---|---|---|---|
| Shelves and floating units | £65 | £180 | 1–3 hrs | Alcove shelving, floating shelves and brackets set to a laser line |
| Door easing, hinges and closers | £55 | £140 | 1–2 hrs | Sticking doors planed and rehung, hinges packed, closers and stops fitted |
| Locks, handles and door furniture | £70 | £160 | 1–2 hrs | Euro cylinders, mortice locks, thumb turns and handles swapped like for like |
| Radiator bleeding and TRV swaps | £60 | £140 | 1–2 hrs | System bled through, thermostatic valve heads replaced, pressure topped up |
| Taps, washers and waste traps | £65 | £150 | 1–2 hrs | Dripping taps, isolation valves, sink and basin traps and flexible tails |
| Flat-pack assembly | £55 | £190 | 1–4 hrs | Wardrobes, beds, desks and drawer units built, levelled and anchored to the wall |
Shelves and floating units
£65 – £180
1–3 hrs
Alcove shelving, floating shelves and brackets set to a laser line
Door easing, hinges and closers
£55 – £140
1–2 hrs
Sticking doors planed and rehung, hinges packed, closers and stops fitted
Locks, handles and door furniture
£70 – £160
1–2 hrs
Euro cylinders, mortice locks, thumb turns and handles swapped like for like
Radiator bleeding and TRV swaps
£60 – £140
1–2 hrs
System bled through, thermostatic valve heads replaced, pressure topped up
Taps, washers and waste traps
£65 – £150
1–2 hrs
Dripping taps, isolation valves, sink and basin traps and flexible tails
Flat-pack assembly
£55 – £190
1–4 hrs
Wardrobes, beds, desks and drawer units built, levelled and anchored to the wall
Because 81% of homes here are houses, Welling DA16 lists lean towards these 6 jobs. Anything outside them is priced from the same 14-row card on the reference page.
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. Full price list, fixings matrix and scope policy.
Why Hello Services
Why Hello Services in Welling
We scan before we drill
Stud, pipe and cable detector on every Welling wall before the first hole — not after the leak.
One visit, one fixed price
Your whole DA16 list quoted in writing the same working day, with no doorstep re-quote.
The right anchor for the wall
We carry the lot, because a four-hole bracket with two screws in a stud and two in fresh air is what a rushed job leaves behind.
Permits and parking included
London Borough of Bexley visitor permits and suspensions are arranged and paid for by us.
Rates and local costs
Hourly, half day or full day in Welling
Hourly rate
£55
per hour, one-hour minimum
Best for one or two small jobs — a shelf, a leaking tap washer, a sticking door.
Half day
£190
up to 4 hours
The most-booked slot in London: three to six jobs from one list, one visit, one price.
Full day
£340
up to 8 hours
A snag list, a whole-flat furniture build, or a move-in day of fixings and fittings.
Same-day call-out
£95
first hour, then hourly
Lock, leak, door or safety job that cannot wait for a booked slot.
- Parking and permits
- London Borough of Bexley visitor permits and bay suspensions are arranged, paid for by us and already inside the quoted figure.
- Charging zones
- Bexley sits outside the Congestion Charge zone and inside ULEZ. Our vans are compliant, so ULEZ never appear on your invoice.
- Access and building rules
- Concierge sign-in, goods-lift booking and out-of-hours windows are handled before the visit, so the clock starts when the work does, not in reception.
Screws, plugs, resin anchors, hollow-wall fixings, silicone and filler come out of the van and are inside the price. Anything bought for you — a replacement tap, a door closer, a specific bracket — is charged at cost with the receipt attached to your invoice.
Scope
What is included in Welling
Included in every visit
- An insured, DBS-checked tradesperson who brings everything needed for a DA16 visit — tools, steps and floor protection.
- Van-stock anchors chosen for timber or metal stud partition, including Stud detector, then fix into the upright; noggins added where the stud misses, at no extra charge.
- Detector before drill, laser line rather than eye, and a load test on each fixing before we sign off.
- Access worked out in advance for Welling DA16, with London Borough of Bexley permits and charges already inside the price.
Not included — and why
- Gas appliances and pipework, which legally belong to a Gas Safe engineer.
- Part P notifiable electrics — new circuits and boards — go to a registered electrician, not a handyman.
- Load-bearing or structural changes, which need building control approval from London Borough of Bexley first.
- Asbestos disturbance — pre-2000 artex, soffits and boards near DA16 are surveyed, never drilled blind.
The full scope policy, the complete fixings matrix and every fixed price sit on one page: handyman reference.
Coverage
Handyman work around Welling
Nearby areas we also cover
What customers say about handyman work
3.9 ★ from 1,412 Google reviewsI'm answering on behalf my wife who was & still is in hospital & can't get wifi , Your two gentlemen were absolutely brilliant very impressed with the results I'm hoping my wife will be home soon so she can see the results before I make a mess when I come from the garden. Eric… Read in full →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.
Guides
Read before you book
Hiring a handyman in the UK: the complete guide
Scope, legal limits, 2026 prices, vetting questions, wall fixings and a job-list method that gets more done in one visit.
18 min read
Handyman prices in London: what jobs actually cost in 2026
Hourly, half-day and fixed job prices, with the London extras that quietly add to a quote.
9 min read
What a handyman can and cannot legally do in the UK
The real line between handyman work and jobs that need a registered electrician, gas or structural trade.
7 min read
Wall fixings guide: which anchor holds in which London wall
The fixing that actually holds in each London wall type, and the realistic load it will take.
8 min read
Related services
Other work we do in Welling
End of tenancy cleaning
Fixing holes filled and touched in, then the whole Welling flat cleaned for check-out.
One-off deep cleaning
A DA16 reset after the drilling, sanding and flat-pack dust has settled.
After builders cleaning
Snag list finished by us, then the builders' dust taken out of the Welling flat.
Moving services
Furniture dismantled in DA16, moved, then rebuilt and re-anchored the same day.
House removals
A full Welling move where the beds and wardrobes come apart and go back together properly.
House clearance
Old furniture and broken fittings taken away from DA16 before the new ones go up.
About the area
Welling in context
A long shopping high street with Danson Park's lake just to the east. 1930s semis with drives and garages, plus small blocks of flats, which is why DA16 work is dominated by timber stud partitions inside. Danson Park and Danson House is the landmark most customers navigate by.
The stock around Danson Park and Danson House sets the job. 1930s semis with drives and garages, plus small blocks of flats. With 19% of Welling's 3,815 households in flats, timber or metal stud partition is what our fitters meet on most DA16 visits. On that wall we use stud detector, then fix into the upright, and we will tell you the honest ceiling: 35 kg into timber, 15 kg into metal stud with a toggle.
Because 16% of homes here are rented privately, we are often working to an agent's deadline — photographs of every fixing and an itemised invoice come as standard. Access is planned before the van leaves. Driveways on almost every street; the high street has timed bays. Where London Borough of Bexley needs a visitor permit or a bay suspension we book it, and bexley sits outside the Congestion Charge zone and inside ULEZ.
- 3,815 households in Welling, 19% of them flats — the ratio that decides lift, stairs and drilling noise windows
- Wall we meet most in DA16: Timber or metal stud partition — stud detector, then fix into the upright
- Nearest station Welling (Southeastern); driveways on almost every street
- We work the whole of DA16, including everything within walking distance of Danson Park and Danson House
Where Welling sits in our coverage
Welling is one of the neighbourhoods on our handyman work in Bexley page, which sits under handyman work across London. Same-week crews working this postcode also cover handyman work in Bexleyheath (1.6 miles), handyman work in Sidcup (1.6 miles), handyman work in Plumstead (2.0 miles), handyman work in Eltham (2.6 miles) and handyman work in Erith (3.1 miles). If your address sits on the boundary, book the closest page — the price and the crew are the same.
Welling DA16 at a glance
- Area
- Welling, Bexley
- Postcodes served
- DA16
- Nearest station
- Welling (Southeastern)
- Dominant wall construction
- timber stud partitions inside, cavity brickwork outside
- Fixing we use most
- Stud detector, then fix into the upright; noggins added where the stud misses
- Realistic load
- 35 kg into timber, 15 kg into metal stud with a toggle
- Most-booked list
- a half-day job list — doors eased, blinds up, shelves fitted, taps re-washered
- Watch out for
- a four-hole bracket with two screws in a stud and two in fresh air
- Charging zones
- Bexley sits outside the Congestion Charge zone and inside ULEZ
- Residents (Welling)
- 10,065
- Households (Welling)
- 3,815
- Typical visit
- Half a day in DA16
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhood Welling (E02000080) — the published geography that covers Welling, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL).
Questions
Welling DA16 handyman questions
£55 an hour with a one-hour minimum, £190 for a half day and £340 for a full day in DA16. Fixed-price jobs start at £55 — flat-pack from £55, TV mounting from £85, shelving from £65. Send the list and we confirm one written figure.
Yes. Locally that usually means timber or metal stud partition — stud detector, then fix into the upright; noggins added where the stud misses, holding around 35 kg into timber, 15 kg into metal stud with a toggle. The risk we guard against here is a four-hole bracket with two screws in a stud and two in fresh air. Every wall is scanned for studs, pipes and cables before the first hole.
Please do: one visit to Welling beats three. Three or more jobs in one half-day slot means one set-up, one parking arrangement and one price of £190 rather than three separate call-outs. Send photos of each wall with the list and the estimator on this page shows the one-visit saving before you book.
Like-for-like socket faces, switches and light fittings, yes, tested on completion. Anything notifiable under Part P — new circuits, a consumer unit, bathroom zones — needs a registered electrician instead. No gas work at all: that is Gas Safe territory and we say so on the phone rather than on the day.
Driveways on almost every street; the high street has timed bays. London Borough of Bexley visitor permits and bay suspensions are arranged and paid for by us and sit inside the quoted price. Concierge sign-in and goods-lift booking are done before the visit, so the clock starts when the work does.
The van carries the consumables — screws, plugs, resin, hollow-wall anchors, silicone, filler — and they are inside the DA16 figure you were quoted. Loading for timber or metal stud partition in advance is why a DA16 visit rarely needs a mid-job supply run. Anything specific bought for you is charged at cost with the receipt attached to the invoice.
Yes. Every area in Bexley has its own page, and we cross borough boundaries constantly. If your address sits on the edge of DA16, book the nearest page and we will confirm the same fixed price.
Source: ONS Census 2021, borough totals via Nomis (table TS008, TS041, TS007A, TS044, TS054, TS003). Figures describe the whole borough, the smallest area ONS publishes every one of these tables for.
Book a handyman in Welling DA16
Send your job list and a photo of each wall for a fixed written price the same working day. Fixings, permits and taking the packaging away are already in the figure.
What customers say about handyman work
3.9 ★ from 1,412 Google reviewsI'm answering on behalf my wife who was & still is in hospital & can't get wifi , Your two gentlemen were absolutely brilliant very impressed with the results I'm hoping my wife will be home soon so she can see the results before I make a mess when I come from the garden. Eric… Read in full →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.