Kensington and Chelsea · SW7 · Factory and industrial clearance
Same-week slots · Fully insured · Local South Kensington fitters · Fixed written pricesBooking factory and industrial clearance near The Victoria and Albert Museum? Museum-visitor traffic, single-lane service roads and lift-free upper floors in older conversions, and that is planned into the slot rather than discovered on the day. Prices start at £680 and are fixed before we travel. Units are built in the room they live in, then wall-anchored where they need it.
Overview
This page prices factory and industrial clearance for South Kensington SW7 specifically: period conversion stock, 54% privately rented and 2,840 households in total. Work starts at £680, fixed in writing, with parking and Royal Borough of Kensington and Chelsea permit rules costed before an insured fitter travels.
How it works
Step 1
Every machine, rack and pallet is listed with a recover, resell or recycle decision against it, so nothing valuable leaves as waste by accident.
Step 2
We work only to plant that has been certified isolated, and we say so in writing rather than assuming the last shift switched it off.
Step 3
Consumables and benching first, then racking, then plant, so the floor stays clear enough to move the heavy items last.
Step 4
Ferrous, non-ferrous, WEEE and general are weighed separately, which is how the scrap credit on your invoice is calculated.
Step 5
Swarf and dust removed, floor swept, photographs and paperwork issued for the dilapidations claim.
Why choose us
Five to ten working days for a full unit, since the survey, isolation certificates and estate access all have to be in place first. A part clear around a working line can usually start within a week. South Kensington (Circle, District, Piccadilly) is the nearest station, so a SW7 visit rarely needs a whole morning set aside.
We expect lath and plaster over timber studs in South Kensington, with solid brick on the party and external walls, the pattern behind 2,840 households inside the SW7 neighbourhood in SW7, and we carry the anchors, through-fixings and long bits that match. The mistake we spend most time undoing here is a plasterboard plug spun into lime plaster; locally that also means which crumbles the key and drops the panel, a median age of 37 in this neighbourhood shapes what gets ordered here.
Upper-tier waste carrier registration with consignment paperwork for WEEE, oils and hazardous streams, plus a waste transfer note per load. Scrap is weighed on a certificated weighbridge so the credit on your invoice is auditable.
Three to six operatives depending on the plant, with skates, pallet trucks and a tail-lift 7.5t as standard and a HIAB where a machine cannot be moved to the bay by hand. Museum-visitor traffic, single-lane service roads and lift-free upper floors in older conversions.
Fixed prices
| Job | From | Typical time | What sets the price |
|---|---|---|---|
| Part clear, single production line | £680 | 6–8 hrs | One line stripped of tooling, benching and consumables while the rest of the unit keeps running, which is slower than clearing an empty floor. |
| Full unit clearance, up to 5,000 sq ft | £1,850 | 1–2 days | Priced by floor area and the density of what is left, since a light assembly unit and a machine shop of the same size are nothing alike to clear. |
| Machinery removal, per item | £320 | 2–4 hrs | Bolted-down plant has to be disconnected, jacked, skated to the door and loaded — that is rigging labour, not clearance labour. |
| Scrap metal recovery, per tonne | Credit | By load | Steel, copper and aluminium carry a resale value that we credit against the invoice rather than quietly keeping, which is what makes a metal-heavy unit cheaper to clear than an office of the same size. |
| WEEE and electrical plant, per pallet | £185 | 1–2 hrs | Motors, control panels and powered plant fall under WEEE and move on consignment paperwork to a permitted treatment facility. |
| Post-clear industrial sweep | £380 | 3–5 hrs | Swarf, oil residue and dust removed so the unit meets the dilapidations standard rather than merely being empty. |
Part clear, single production line
£680 · 6–8 hrs
One line stripped of tooling, benching and consumables while the rest of the unit keeps running, which is slower than clearing an empty floor.
Full unit clearance, up to 5,000 sq ft
£1,850 · 1–2 days
Priced by floor area and the density of what is left, since a light assembly unit and a machine shop of the same size are nothing alike to clear.
Machinery removal, per item
£320 · 2–4 hrs
Bolted-down plant has to be disconnected, jacked, skated to the door and loaded — that is rigging labour, not clearance labour.
Scrap metal recovery, per tonne
Credit · By load
Steel, copper and aluminium carry a resale value that we credit against the invoice rather than quietly keeping, which is what makes a metal-heavy unit cheaper to clear than an office of the same size.
WEEE and electrical plant, per pallet
£185 · 1–2 hrs
Motors, control panels and powered plant fall under WEEE and move on consignment paperwork to a permitted treatment facility.
Post-clear industrial sweep
£380 · 3–5 hrs
Swarf, oil residue and dust removed so the unit meets the dilapidations standard rather than merely being empty.
Industrial clearance is quoted plus VAT at 20% after a site survey, because floor area alone does not describe a unit. Scrap value is credited back on the invoice. Consignment notes for hazardous streams, transfer notes, ULEZ and any estate access charges are itemised separately.
Scope
The guys arrived prompt at 9 am . Sorry I’m rubbish at names but I remember the one guys initials were AB . He really worked hard . Both guys were very polite and were happy to pop back up the stairs to finish dusting the bedrooms surfaces that were missed . Not one moan… Read in full →
Hannah and her friend were friendly and thoughtful. They were very professional and hard working. They also turned a junk room into a nice bedroom. I cannot thank them or praise them enough.
This was my second job for Hello services and I was delighted to have Adam and Sultan back again. I had furniture assembly and clearance work to be done, and again it was done very professionally to a very high standard, and with absolute politeness at all times. They did an excellent job yet again… Read in full →
Read all 8 business clearance reviews →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.
Coverage
Also in this area
The parent commercial silo — offices, units, shops and estate handovers.
Rubble, plasterboard and strip-out waste removed with transfer notes issued.
Desks, chairs, IT and storage cleared out of hours to a handover date.
Mixed loads collected by volume with a same-day waste transfer note.
Working in South Kensington
2,840 households sit inside the SW7 neighbourhood covering South Kensington. The build is period conversion, the tenure profile renter-heavy, and 86% of those homes are flats.
With 54% private renting against 38% owner-occupied, most SW7 bookings land on a move-in day rather than a weekend.
Expect lath and plaster over timber studs in South Kensington, with solid brick on the party and external walls, the pattern behind 2,840 households inside the SW7 neighbourhood behind the plaster in SW7. That is why fixings are picked in the room rather than off a van shelf, and why a plasterboard plug spun into lime plaster; locally that also means which crumbles the key and drops the panel, a median age of 37 in this neighbourhood shapes what gets ordered here is the fault we are called back to undo.
South Kensington sits inside the Congestion Charge zone as well as ULEZ, so both are itemised on the quote rather than absorbed into an hourly rate. What shapes the job more is the neighbourhood itself — museum quarter, French lycée and cream-stucco crescents — which is why a SW7 quote is not a Kensington and Chelsea average.
Getting to the door matters as much as the job: museum-visitor traffic, single-lane service roads and lift-free upper floors in older conversions. South Kensington (Circle, District, Piccadilly) is the nearest station, and three to six operatives depending on the plant, with skates, pallet trucks and a tail-lift 7.5t as standard and a HIAB where a machine cannot be moved to the bay by hand.
Area at a glance
Who lives in South Kensington and what they live in decides how factory and industrial clearance is quoted and how long a visit takes. These are the published Census 2021 figures for the South Kensington neighbourhood itself — not Kensington and Chelsea-wide averages, and not estimates.
5,764
Residents
South Kensington neighbourhood, Census 2021
2,840
Households
Median age 36.5
Flats vs houses
Residents by sex
Single-person households
45.3%
Privately rented
53.7%
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhood South Kensington (E02000592) — the published geography that covers South Kensington, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL). Coordinates for the SW7 district: 51.4963, -0.1770 — Outward postcode centroid, postcodes.io (Ordnance Survey Open Data).
Part clear, single production line starts at £680 in South Kensington across SW7, with The Victoria and Albert Museum a few streets away — and 38% owner-occupation locally, and every job is quoted as a fixed written price before a fitter is booked. The density and type of what is being removed on this side of Kensington and Chelsea. Metal-heavy units carry a scrap credit that can cut the invoice substantially; units full of mixed production waste, plastics and contaminated packaging cost more at the gate and take longer to segregate on SW7 jobs — and 2,840 households on this patch, with 8% social-rented stock nearby.
Yes — IKEA, Argos, Wayfair, Made and independent brands are all built to the manufacturer's instructions across SW7, with 38% owner-occupation locally. We are independent of every retailer; the names simply describe what we assemble in South Kensington most weeks on the streets near The Victoria and Albert Museum, with this being a short walk from South Kensington (Circle, District, Piccadilly).
In South Kensington, 5–2 hours. Sliding-door and corner wardrobes take two to four times as long because the tracks have to be dead level on Kensington and Chelsea bookings, with a median age of 37 in this neighbourhood. Ask for it in writing before the SW7 visit and it is on the job sheet.
That is exactly why we build in the room it will live in in South Kensington. With 86% of South Kensington homes being flats, narrow hallways and tight turns are the norm on Kensington and Chelsea bookings — and this being Royal Borough of Kensington and Chelsea territory, with 45% one-person households here, so anything that will not pass a doorway once assembled is built where it stands.
Live electrical disconnection, which must be certified by a qualified electrician before we move the plant; Asbestos-containing insulation, lagging or cladding, with this being a short walk from South Kensington (Circle, District, Piccadilly), which needs a licensed removal contractor; Bulk chemical stock or fuel in tanks in this 86% flats neighbourhood — and The Victoria and Albert Museum a few streets away, which is a specialist hazardous waste contract; Structural demolition of the building itself, including mezzanine steelwork that forms part of the structure. Anything outside that scope is quoted separately so the South Kensington SW7 price you agree is the price you pay on Kensington and Chelsea bookings, with 38% owner-occupation locally.
All three. With 54% of South Kensington privately rented and 38% owner-occupied, roughly half the SW7 diary is agent- or landlord-instructed and invoiced separately from the person at the door around South Kensington (Circle, District, Piccadilly) — and this being Royal Borough of Kensington and Chelsea territory, with 45% one-person households here.
The Victoria and Albert Museum is the marker we route to in South Kensington, with a median age of 37 in this neighbourhood, and museum-visitor traffic, single-lane service roads and lift-free upper floors in older conversions. A SW7 slot added to an existing Kensington and Chelsea round usually lands the same week rather than the next for South Kensington (SW7) addresses, with 2,840 households on this patch.
Read next
Handyman
Hourly rates, half-day jobs and the questions worth asking before booking.
Assembly
Which builds are a two-hour job and which reliably eat a weekend.
Assembly
Wardrobes, beds and kitchen units built and levelled the same day.
Free quote · 1-hour reply
Two ways to go: price it yourself on the quote page, or pick a slot on the live booking calendar. South Kensington SW7 jobs are confirmed in writing before anyone travels, and the same crew covers the rest of kensington and chelsea.
No deposit is taken until the price and slot are confirmed in writing.
