Canopy, filters, impeller and ducting

Extractor fan cleaning in Greater Manchester

Cooker hoods and extractor fans degreased from the canopy to the impeller across Manchester, Trafford, Tameside, Rochdale and every borough between — restoring airflow, killing the stale-fat smell and removing the fire risk that a saturated grease filter represents.

  • 115 areas covered
  • Non-caustic products
  • Insured, DBS-checked
  • Fixed price up front
Kitchen extractor hood filters being removed for degreasing in Greater Manchester
Mesh and baffle filters soak in the heated tank; recirculating carbon cartridges are replaced rather than washed.

A saturated grease filter is a fire risk, not just a smell

Extraction is the most neglected appliance in the kitchen. A mesh filter that has never been degreased can hold a surprising amount of liquid fat directly above an open flame, and the loss of airflow pushes cooking moisture into the room — which is where the damp, greasy film on nearby wall tiles and ceilings comes from.

We take the filters out and soak them, clean the canopy inside and out, degrease the impeller and fan housing where the design allows access, clear the light lenses, and check whether the unit is ducted or recirculating. Recirculating carbon cartridges are consumables: washing them does nothing, so we fit new ones and show you the old.

  • Mesh or baffle grease filters removed and dip-tanked
  • Canopy degreased inside and out, including the underside and rim
  • Impeller and fan housing cleaned where the design allows access
  • Carbon cartridges replaced on recirculating hoods (parts at cost)
  • Light lenses cleared, lamps checked, controls wiped
  • Airflow re-checked and the unit run-tested before hand-back

How a extractor clean works

  1. Step 1

    Tell us the hood

    Chimney, integrated, visor, island or downdraft — and ducted or recirculating if you know.

  2. Step 2

    Pull the filters

    Mesh and baffle filters come out and go into the heated non-caustic tank.

  3. Step 3

    Degrease the unit

    Canopy, rim, impeller and housing hand-cleaned; light lenses and controls cleared.

  4. Step 4

    Refit and run-test

    Filters refitted dry or replaced, every speed tested and the extraction checked.

Forty-five minutes to ninety minutes for a domestic hood, depending on canopy size and how much of the impeller is reachable.

Extractor fan cleaning prices across Greater Manchester

Extractor fan cleaning price bands in Greater Manchester
BookingIncludedFrom
Hob and extractorBooked alongside an oven clean.from £35
Single ovenDoor glass split where possible, racks dip-tanked.from £65
Double oven or rangeTwo cavities, all racks and trays.from £95
Fridge freezer / washing machineDefrost, sanitise and deodorise, or descale and clear the filter.from £45

Extractor cleaning is from £35 when booked with an oven or cooker clean. Replacement carbon cartridges and mesh filters are supplied at cost with the receipt.

Your extractor clean checklist

Before we arrive

  • Clear the hob so we can work directly beneath the canopy
  • Tell us if the hood is ducted outside or recirculating
  • Note the filter type: mesh, baffle or paper
  • Say if a carbon cartridge has ever been changed

Access notes

  • Flag island hoods and high ceilings — they need step access
  • Tell us if the hood is integrated behind a cabinet fascia
  • Point out any electrical isolator we should use before we start

Keeping airflow up

  • Degrease mesh filters every two to three months
  • Replace recirculating carbon cartridges roughly every six months
  • Run the fan for ten minutes after cooking, not just during

On the ground in Greater Manchester

Recirculating hoods in city-centre and Quays apartments

Apartments around Deansgate, Ancoats, MediaCityUK and Salford Quays are almost all recirculating — there is no external duct to vent through. That makes the carbon cartridge the only thing removing odour, and it is the part almost nobody replaces. We carry common sizes and fit them on the visit.

Damp and condensation in Pennine-fringe housing

Rainfall is higher along the eastern edge towards Mossley, Uppermill, Littleborough and Whitworth, and kitchens there struggle to shed moisture in winter. Restoring extraction airflow is the cheapest single improvement to condensation on kitchen windows and the mould that follows it.

Landlord compliance across Manchester's HMO belt

Licensed HMOs in Rusholme, Longsight, Fallowfield and Levenshulme are inspected on kitchen ventilation. A photographed filter change and a run-test on every speed gives you something concrete for the licence file rather than an unevidenced claim.

Where we cover

Crews run daily across 10 metropolitan boroughs and 83 outward postcode districts, from Wigan and Leigh in the west to Mossley and Uppermill on the Pennine fringe.

Greater Manchester — centred on 53.4808, -2.2426. Contract crews cover Bolton, Bury, Manchester, Oldham, Rochdale, Salford, Stockport, Tameside, Trafford, Wigan to the BL0, BL1, BL2, BL3, BL4, BL5, BL6, BL8, BL9, M1, M11, M12, M13, M14, M15, M16, M18, M19, M2, M20, M21, M24, M25, M26, M27, M28, M29, M3, M30, M31, M32, M33, M34, M35, M38, M4, M40, M41, M43, M44, M45, M46, M5, M50, M6, M7, M8, M9, OL1, OL10, OL11, OL12, OL15, OL16, OL2, OL3, OL4, OL5, OL6, OL7, OL8, OL9, SK1, SK14, SK15, SK16, SK2, SK3, SK4, SK5, SK6, SK7, SK8, WA14, WA15, WA3, WN1, WN2, WN3, WN4, WN5, WN6, WN7 outward-code boundaries. Open Greater Manchester on Google Maps.

Choose your area for extractor fan cleaning

Each local page adds postcode coverage, van parking notes, nearby areas and an appliance checklist you can hand to a letting agent.

Other appliance services in Greater Manchester

Extractor fan cleaning FAQs

  • How much is extractor fan cleaning in Greater Manchester?

    From £35 when booked alongside an oven or cooker clean, which is how most people book it. Replacement filters and carbon cartridges are supplied at cost.

  • Can you clean the fan itself, not just the filters?

    Where the impeller and housing are reachable without dismantling the electrics, yes. On sealed motor units we clean everything accessible and tell you exactly what is behind the sealed panel.

  • Should carbon filters be washed or replaced?

    Replaced. Carbon cartridges work by adsorption and are spent once saturated — washing them achieves nothing. We fit new ones and hand you the old cartridge so you can see the difference.

  • How often should filters be cleaned?

    Mesh grease filters every two to three months in a household that cooks daily, and carbon cartridges roughly every six months. Heavy frying shortens both intervals considerably.

  • Will it stop the greasy film on my kitchen walls?

    It is the main cause. Once airflow is restored, cooking aerosols leave the room instead of settling on tiles, ceilings and cupboard doors.

  • Do you clean island and downdraft hoods?

    Yes. Island hoods need step access and downdraft units need the cassette lifted, so tell us which you have when booking and we allow the extra time.

  • Is this suitable for a commercial kitchen?

    This page covers domestic hoods. Commercial canopy and ductwork cleaning to TR19 is quoted separately — ask and we will point you at the commercial team.

  • Do you cover all Greater Manchester boroughs?

    Yes, all 115 areas across the ten boroughs. Pick your area below for postcode and access detail.

Extractor fan cleaning · Greater Manchester

Free quote today