City of London · EC3 · Shed assembly
Same-week slots · Fully insured · Local Aldgate fitters · Fixed written pricesWe provide shed assembly in Aldgate EC3 for houses and flats around The Gherkin at 30 St Mary Axe. From £140, quoted in writing before the visit, with one fitter for a small shed on a ready base; two for anything over 8x6ft or where roof panels need lifting together The base is checked for level before the first panel is stood up.
Overview
Shed assembly in Aldgate EC3 is a fixed-price visit for renter-heavy homes in City of London, most of them post-war. 4,914 households sit inside this EC3 patch, 98% of them flats, so we quote on access near The Gherkin at 30 St Mary Axe rather than a London average.
How it works
Step 1
Base checked for level and size, and the shed's height and position checked against the garden's remaining permitted development allowance.
Step 2
Panels, roof struts and fixings checked against the parts list — a shed with a bent panel or a short bag of screws is found before the frame goes up, not halfway through.
Step 3
Floor and wall panels built up and squared before the roof goes on, since an out-of-square frame is what makes doors stick.
Step 4
Roof panels fitted, felt or shingle lapped correctly and any window or vent sealed.
Step 5
Ground anchors or wall straps fitted in exposed gardens, doors hung and eased, packaging taken away.
Why choose us
Fitters carry £5m public liability cover. Most garden sheds fall under permitted development if they sit under 2.5m at the eaves within 2m of a boundary and the total of all outbuildings stays under 50% of the garden — we flag it if a build looks close to either limit rather than assume it is fine.
One fitter for a small shed on a ready base; two for anything over 8x6ft or where roof panels need lifting together. Aldgate gyratory red routes, tower-block concierge sign-in and lift booking.
Most builds are booked within a week, longer in spring when garden project demand peaks across London. Aldgate (Circle, Metropolitan) is the nearest station, so a EC3 visit rarely needs a whole morning set aside.
We expect with metal stud partitions between rooms, over dot-and-dab plasterboard over blockwork, the pattern behind 4,914 households inside the EC3 neighbourhood in EC3, and we carry the anchors, through-fixings and long bits that match. The mistake we spend most time undoing here is short screws that grip only the board and slowly lever it off the dabs, as the Aldgate stock goes, the reality on the streets around The Gherkin at 30 St Mary Axe.
Fixed prices
| Job | From | Typical time | What sets the price |
|---|---|---|---|
| Small shed up to 6x4ft, base ready | £140 | 2–3 hrs | A one-piece or simple panel shed on an existing slab, framed, roofed and felted in a morning. |
| Medium shed 8x6ft, base ready | £220 | 3–5 hrs | More panels and a ridged roof mean more bracing before the structure is rigid enough to felt. |
| Large shed or workshop 10x8ft+, base ready | £320 | 5–7 hrs | Heavier framing, often double doors and a window, and usually a two-person lift for the roof panels. |
| Paving-slab base, per m² | £45 | By area | Compacted hardcore and a sand bed under the slabs, laid to a slight fall so water runs away from the shed floor. |
| Timber bearer base on an existing hard surface | £85 | 2–3 hrs | Pressure-treated bearers levelled and packed to keep the shed floor off standing water without a full slab. |
| Anchor kit for an exposed or elevated garden | £60 | 45–60 min | Ground anchors or wall straps fitted so the shed does not lift in a gust funnelled between two terraces. |
Small shed up to 6x4ft, base ready
£140 · 2–3 hrs
A one-piece or simple panel shed on an existing slab, framed, roofed and felted in a morning.
Medium shed 8x6ft, base ready
£220 · 3–5 hrs
More panels and a ridged roof mean more bracing before the structure is rigid enough to felt.
Large shed or workshop 10x8ft+, base ready
£320 · 5–7 hrs
Heavier framing, often double doors and a window, and usually a two-person lift for the roof panels.
Paving-slab base, per m²
£45 · By area
Compacted hardcore and a sand bed under the slabs, laid to a slight fall so water runs away from the shed floor.
Timber bearer base on an existing hard surface
£85 · 2–3 hrs
Pressure-treated bearers levelled and packed to keep the shed floor off standing water without a full slab.
Anchor kit for an exposed or elevated garden
£60 · 45–60 min
Ground anchors or wall straps fitted so the shed does not lift in a gust funnelled between two terraces.
Prices are labour to build the kit you supply, on a base that is level and ready. Roofing felt, fixings and standard anchor kits are included; a bespoke concrete base is quoted separately by the m². We flag before booking where a build looks close to the 2.5m eaves height or 50%-of-garden permitted development limits so you can check before ordering. Permits, ULEZ and the Congestion Charge where they apply are itemised.
Scope
Sulltan is the best handyman in London. He is very reliable and professional. I highly recommend.
Really pleased with our house move. The guys came on time, loaded everything carefully like a huge jigsaw! Nothing got broken and even though they were working on an hourly rate they were really efficient, not to waste any time. Our only criticism is that we needed a few items disassembled to get on the… Read in full →
Sulltan is the best handyman in London , Highly recommend ......
Read all 48 flat-pack assembly reviews →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.
Coverage
Also in this area
Garden sets, loungers, BBQs, parasols and shed bases built outside and weather-fixed.
Fitted and flat-pack wardrobes scribed to the wall and anchored so doors stay square.
TVs, mirrors, shelves and curtain poles fixed into the wall you actually have, in one visit.
Wardrobes, beds, desks and storage built, levelled and anchored to the wall.
Sheds emptied, dismantled and the base left clear and swept.
Working in Aldgate
4,914 households sit inside the EC3 neighbourhood covering Aldgate. The build is post-war, the tenure profile renter-heavy, and 98% of those homes are flats.
Because 48% of Aldgate is privately rented and 15% socially rented, a lot of EC3 work is agreed with a landlord or managing agent rather than the person opening the door.
Walls are with metal stud partitions between rooms, over dot-and-dab plasterboard over blockwork, the pattern behind 4,914 households inside the EC3 neighbourhood, so the fixing that matters in Aldgate is chosen on site — the usual failure here is short screws that grip only the board and slowly lever it off the dabs, as the Aldgate stock goes, the reality on the streets around The Gherkin at 30 St Mary Axe.
Eastern edge of the Square Mile where office towers meet Whitechapel's high street. That character decides the practical detail of shed assembly here far more than the borough boundary does. Aldgate sits inside the Congestion Charge zone as well as ULEZ, so both are itemised on the quote rather than absorbed into an hourly rate.
On access, aldgate gyratory red routes, tower-block concierge sign-in and lift booking — one reason one fitter for a small shed on a ready base; two for anything over 8x6ft or where roof panels need lifting together. Fitters travelling in use Aldgate (Circle, Metropolitan).
Area at a glance
Who lives in Aldgate and what they live in decides how shed assembly is quoted and how long a visit takes. These are the published Census 2021 figures for the City of London neighbourhood itself — not City of London-wide averages, and not estimates.
8,583
Residents
City of London neighbourhood, Census 2021
4,914
Households
Median age 36.9
Flats vs houses
Residents by sex
Single-person households
51%
Privately rented
48.3%
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhood City of London (E02000001) — the published geography that covers Aldgate, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL). Coordinates for the EC3 district: 51.5143, -0.0865 — Outward postcode centroid, postcodes.io (Ordnance Survey Open Data).
Small shed up to 6x4ft, base ready starts at £140 in Aldgate in this 98% flats neighbourhood, with 98% of homes here being flats — and 15% social-rented stock nearby, and every job is quoted as a fixed written price before a fitter is booked. Shed size and whether the base already exists. A slab or bearer base adds a separate charge but saves the shed floor from sitting on wet grass or bare soil through its first winter across EC3 — and 51% one-person households here, with 2% of Aldgate homes being houses.
5m at the eaves within 2m of a boundary and all outbuildings together stay under half the garden in this 98% flats neighbourhood, with City of London parking rules in play. Many gardens in Aldgate are small enough that a large shed pushes close to that limit — we check before booking rather than after the kit is built for Aldgate (EC3) addresses — and 15% social-rented stock nearby, with 2% of Aldgate homes being houses.
Yes — a paving-slab base is £45/m², with this being City of London Corporation territory, or a timber bearer base from £85 where a full slab isn't needed in Aldgate. With 2% of Aldgate homes being houses with a garden, most jobs here are base-plus-build in one visit for Aldgate (EC3) addresses, with a median age of 37 in this neighbourhood.
Not once anchored. Terraced gardens funnel wind between the houses more than an open plot does, so we fit ground anchors or wall straps as standard rather than leave it to the kit's own fixings on this side of City of London, with 51% one-person households here — and 4,914 households on this patch, which is short screws that grip only the board and slowly lever it off the dabs, as the Aldgate stock goes, the reality on the streets around The Gherkin at 30 St Mary Axe on unanchored builds we're called back to.
The Gherkin at 30 St Mary Axe is the marker we route to on this side of City of London, with 37% owner-occupation locally, and aldgate gyratory red routes, tower-block concierge sign-in and lift booking. A EC3 slot added to an existing City of London round usually lands the same week rather than the next in this 98% flats neighbourhood, with 15% social-rented stock nearby.
Most builds are booked within a week, longer in spring when garden project demand peaks across London on the streets near The Gherkin at 30 St Mary Axe, with 98% of homes here being flats. Aldgate sits close to Aldgate (Circle, Metropolitan), with City of London parking rules in play, so we can usually add a EC3 job to an existing City of London round at short notice for Aldgate (EC3) addresses.
Aldgate gyratory red routes, tower-block concierge sign-in and lift booking in this 98% flats neighbourhood. Where a permit or a suspended bay is needed in City of London Corporation it is itemised on the quote before the visit, never added afterwards on City of London bookings — and The Gherkin at 30 St Mary Axe a few streets away, with 51% one-person households here.
Read next
Handyman
Hourly rates, half-day jobs and the questions worth asking before booking.
Assembly
Which builds are a two-hour job and which reliably eat a weekend.
Assembly
Wardrobes, beds and kitchen units built and levelled the same day.
Free quote · 1-hour reply
Two ways to go: price it yourself on the quote page, or pick a slot on the live booking calendar. Aldgate EC3 jobs are confirmed in writing before anyone travels, and the same crew covers the rest of city of london.
No deposit is taken until the price and slot are confirmed in writing.
