Harrow · HA8 · Handyman
Handyman in Edgware, HA8
Flat-pack assembly and TV mounting in Edgware, HA8: the Harrow housing here means timber stud partitions inside, cavity brickwork outside. We price the whole list, not the clock, and put the right anchor in the right wall.
- Trustpilot 4.5· 3,100+ reviews
- Google 3.9· 1,429 reviews
- £1m public liability
- Licensed waste carrier CBDU300454
- Since 2019
- £55 an hour, £190 a half day — fixed price for the whole list
- Timber or metal stud partition here, so the fixings are chosen for the wall, not pulled from a pack
- Stud, pipe and cable scan before the first hole, every visit
- London Borough of Harrow permits, ULEZ and packaging removal already inside the price
The service, locally
Handyman work in Edgware
- Per hour, one-hour minimum
- £55Per hour, one-hour minimum
- Edgware homes are flats
- 34%Edgware homes are flats
- Fixed-price jobs
- 14Fixed-price jobs
- Households in Edgware
- 2,948Households in Edgware
Instant estimate
Price your Edgware job list
Estimated for Edgware HA8
£85 – £305
Slot needed: One to two hours
- Flat-pack assembly
- £55 – £190
- Door easing, hinges and closers
- £55 – £140
- One-visit saving
- −£25
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. Batch the list into one visit and you pay for one set-up rather than three. Fixings, plugs and filler are already inside these figures.
How it works
How a Edgware visit works
- Send your job listA photo per wall lets us read the substrate before quoting, so the Edgware HA8 price we send is the price you pay.
- Detector out before the drillStud, pipe and cable detector out first, dust sheets down, then the anchor that suits timber or metal stud partition.
- Signed off with youWe load-test each fixing, take the cardboard and old fittings away, and walk the list with you — London Borough of Harrow permits already settled.
- Get my price
Walls and fixings
What is behind the plaster in Edgware
Most likely here
Timber or metal stud partition — Flat conversions and 1960s-onward internal walls
Stud detector, then fix into the upright; noggins added where the stud misses. Realistic load: 35 kg into timber, 15 kg into metal stud with a toggle. What goes wrong: two of four bracket holes on the stud and two in fresh air.
Lath and plaster
Pre-1930 terraces and mansion blocks
- Fixing
- Locate the timber lath studs, fix through into the stud with 5 × 80 mm screws
- Safe load
- Up to 25 kg into a stud, nothing into the plaster itself
- What pulls out
- A plasterboard plug in lime plaster crumbles the key and drops the whole panel
Solid London stock brick
Victorian and Edwardian party and external walls
- Fixing
- 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor
- Safe load
- 40 kg-plus per fixing when anchored into brick, not mortar
- What pulls out
- Fixing into soft lime mortar joints, which spin out under load
Dot-and-dab plasterboard
1990s onward new builds and conversions
- Fixing
- Long fixings through the void into the blockwork behind, or a spread-load anchor
- Safe load
- 30 kg with a through-fixing, 8 kg on a hollow-wall anchor alone
- What pulls out
- Short screws that only grip the board, then lever it off the dabs
Timber or metal stud partition
Flat conversions and 1960s-onward internal walls
- Fixing
- Stud detector, then fix into the upright; noggins added where the stud misses
- Safe load
- 35 kg into timber, 15 kg into metal stud with a toggle
- What pulls out
- Two of four bracket holes on the stud and two in fresh air
Precast concrete and blockwork
Post-war estates and podium blocks
- Fixing
- SDS drill, 8 mm hole, sleeve anchor or screwbolt
- Safe load
- 50 kg-plus per fixing
- What pulls out
- Hitting reinforcement or a buried conduit without a scan first
Insulated dry lining
Retrofitted period homes and low-energy refurbishments
- Fixing
- Insulation-rated frame fixings that reach the masonry beyond the board and foam
- Safe load
- 25 kg, spread across four points
- What pulls out
- Compressing the insulation so the fixing slowly works loose
Fixed prices
Handyman prices in Edgware
| Job | From | To | Time on site | What it covers |
|---|---|---|---|---|
| Door easing, hinges and closers | £55 | £140 | 1–2 hrs | Sticking doors planed and rehung, hinges packed, closers and stops fitted |
| Radiator bleeding and TRV swaps | £60 | £140 | 1–2 hrs | System bled through, thermostatic valve heads replaced, pressure topped up |
| Shelves and floating units | £65 | £180 | 1–3 hrs | Alcove shelving, floating shelves and brackets set to a laser line |
| Filling and patching | £70 | £180 | 1–3 hrs | Old fixing holes filled and sanded ready for a check-out inspection |
| Taps, washers and waste traps | £65 | £150 | 1–2 hrs | Dripping taps, isolation valves, sink and basin traps and flexible tails |
| Flat-pack assembly | £55 | £190 | 1–4 hrs | Wardrobes, beds, desks and drawer units built, levelled and anchored to the wall |
Door easing, hinges and closers
£55 – £140
1–2 hrs
Sticking doors planed and rehung, hinges packed, closers and stops fitted
Radiator bleeding and TRV swaps
£60 – £140
1–2 hrs
System bled through, thermostatic valve heads replaced, pressure topped up
Shelves and floating units
£65 – £180
1–3 hrs
Alcove shelving, floating shelves and brackets set to a laser line
Filling and patching
£70 – £180
1–3 hrs
Old fixing holes filled and sanded ready for a check-out inspection
Taps, washers and waste traps
£65 – £150
1–2 hrs
Dripping taps, isolation valves, sink and basin traps and flexible tails
Flat-pack assembly
£55 – £190
1–4 hrs
Wardrobes, beds, desks and drawer units built, levelled and anchored to the wall
Edgware HA8 books this 6-job shortlist more than anything else, because 66% of homes here are houses. All 14 fixed prices sit on the shared reference page.
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. Full price list, fixings matrix and scope policy.
Why Hello Services
Why Hello Services in Edgware
The right anchor for the wall
We carry the lot, because a four-hole bracket with two screws in a stud and two in fresh air is what a rushed job leaves behind on HA8 jobs — and 2,948 households on this patch, with 21% one-person households here.
Permits and parking included
London Borough of Harrow visitor permits and suspensions are arranged and paid for by us on HA8 jobs.
Fixings and filler included
Screws, plugs, resin, silicone and filler come from the van, not from your invoice on Harrow bookings. London Borough of Harrow rules apply where the kerb or a bay suspension is involved.
Packaging leaves with us
Flat-pack cardboard, polystyrene and old fittings go in the van at the end of the HA8 visit across HA8, with 34% of homes here being flats.
Rates and local costs
Hourly, half day or full day in Edgware
Hourly rate
£55
per hour, one-hour minimum
Best for one or two small jobs — a shelf, a leaking tap washer, a sticking door.
Half day
£190
up to 4 hours
The most-booked slot in London: three to six jobs from one list, one visit, one price.
Full day
£340
up to 8 hours
A snag list, a whole-flat furniture build, or a move-in day of fixings and fittings.
Same-day call-out
£95
first hour, then hourly
Lock, leak, door or safety job that cannot wait for a booked slot.
- Parking and permits
- London Borough of Harrow visitor permits and bay suspensions are arranged, paid for by us and already inside the quoted figure.
- Charging zones
- Harrow sits outside the Congestion Charge zone and inside ULEZ. Our vans are compliant, so ULEZ never appear on your invoice.
- Access and building rules
- Concierge sign-in, goods-lift booking and out-of-hours windows are handled before the visit, so the clock starts when the work does, not in reception.
Screws, plugs, resin anchors, hollow-wall fixings, silicone and filler come out of the van and are inside the price. Anything bought for you — a replacement tap, a door closer, a specific bracket — is charged at cost with the receipt attached to your invoice.
Scope
What is included in Edgware
Included in every visit
- One vetted fitter for the whole Edgware HA8 list, with ladders, tools and sheets already in the van.
- Stud detector, then fix into the upright; noggins added where the stud misses and the rest of our van stock, because timber or metal stud partition is what most HA8 fixings go into.
- A stud, pipe and cable scan before drilling, every fixing set to a level and load-tested in front of you.
- Parking, permits and any charge zone sorted with London Borough of Harrow by us, not added to your bill on the day.
Not included — and why
- Anything gas — boilers, hobs, pipework — is Gas Safe territory and we will not touch it in Edgware HA8.
- New circuits or consumer units, which are notifiable under Part P and need a registered electrician.
- Anything structural in Edgware HA8: that route starts with London Borough of Harrow building control, and we will point you there.
- Drilling into suspected asbestos: pre-2000 timber or metal stud partition finishes get a survey before anyone makes a hole.
The full scope policy, the complete fixings matrix and every fixed price sit on one page: handyman reference.
Coverage
Handyman work around Edgware
Nearby areas we also cover
Guides
Read before you book
Hiring a handyman in the UK: the complete guide
Scope, legal limits, 2026 prices, vetting questions, wall fixings and a job-list method that gets more done in one visit.
18 min read
Handyman prices in London: what jobs actually cost in 2026
Hourly, half-day and fixed job prices, with the London extras that quietly add to a quote.
9 min read
What a handyman can and cannot legally do in the UK
The real line between handyman work and jobs that need a registered electrician, gas or structural trade.
7 min read
Wall fixings guide: which anchor holds in which London wall
The fixing that actually holds in each London wall type, and the realistic load it will take.
8 min read
Related services
Other work we do in Edgware
End of tenancy cleaning
Fixing holes filled and touched in, then the whole Edgware flat cleaned for check-out.
One-off deep cleaning
A HA8 reset after the drilling, sanding and flat-pack dust has settled.
After builders cleaning
Snag list finished by us, then the builders' dust taken out of the Edgware flat.
Moving services
Furniture dismantled in HA8, moved, then rebuilt and re-anchored the same day.
House removals
A full Edgware move where the beds and wardrobes come apart and go back together properly.
House clearance
Old furniture and broken fittings taken away from HA8 before the new ones go up.
About the area
Edgware in context
1930s semis with drives, purpose-built flats and new town-centre blocks around Edgware Broadwalk and Watling Street, and that stock decides the fixing: timber stud partitions inside first, everything else after. Broadwalk shopping, the Roman Watling Street and interwar suburbia, so HA8 jobs reward a scan over a guess.
What is behind the plaster in Edgware is decided by when it was built. 1930s semis with drives, purpose-built flats and new town-centre blocks. Across the 2,948 households here, timber or metal stud partition dominates, so stud detector, then fix into the upright is our default approach. Our fitters answer it with stud detector, then fix into the upright, which takes 35 kg into timber, 15 kg into metal stud with a toggle without creeping in the months afterwards.
With 35% private renting and 10% social renting locally, a good share of Edgware work is landlord snagging, safety fixings and putting fixing holes right before an inventory. Parking, lifts and sign-in are settled up front: driveways common We arrange London Borough of Harrow permits ourselves, and harrow sits outside the Congestion Charge zone and inside ULEZ.
- Housing mix here: 34% flats to 66% houses, 9,266 residents in total
- Timber or metal stud partition dominates Edgware, so the van carries the anchors that suit it, not a generic pack
- Access: driveways common
- HA8 covered, Edgware Broadwalk and Watling Street to the borough boundary, £190 a half day
Where Edgware sits in our coverage
Everything we fit in Edgware is booked through our handyman work in Harrow page, which sits under handyman work across London. Nearest pages to this one, in travel order: handyman work in Burnt Oak HA8 (under ½ mile), handyman work in Stanmore HA7 (1.6 miles), handyman work in Mill Hill NW7 (1.7 miles), handyman work in Colindale NW9 (1.8 miles) and handyman work in Kenton HA3 (2.4 miles). If your address sits on the boundary, book the closest page — the price and the crew are the same. For every trade we run at this postcode, see all services in Edgware.
Most booked alongside this in Edgware
Edgware HA8 at a glance
- Area
- Edgware, Harrow
- Postcodes served
- HA8
- Nearest station
- Edgware (Northern)
- Dominant wall construction
- timber stud partitions inside, cavity brickwork outside
- Fixing we use most
- Stud detector, then fix into the upright; noggins added where the stud misses
- Realistic load
- 35 kg into timber, 15 kg into metal stud with a toggle
- Most-booked list
- a half-day job list — doors eased, blinds up, shelves fitted, taps re-washered
- Watch out for
- a four-hole bracket with two screws in a stud and two in fresh air
- Charging zones
- Harrow sits outside the Congestion Charge zone and inside ULEZ
- Residents (Edgware)
- 9,266
- Households (Edgware)
- 2,948
- Typical visit
- Half a day in HA8
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhood Edgware West (E02000439) — the published geography that covers Edgware, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL).
Questions
Edgware HA8 handyman questions
£55 an hour with a one-hour minimum, £190 for a half day and £340 for a full day in HA8 on Harrow bookings, with 55% owner-occupation locally. Fixed-price jobs start at £55 — flat-pack from £55, TV mounting from £85, shelving from £65 on the Edgware rounds, with 10% social-rented stock nearby. Send the list and we confirm one written figure on HA8 jobs.
Yes. Locally that usually means timber or metal stud partition — stud detector on this side of Harrow, with Harrow parking rules in play — and 2,948 households on this patch, then fix into the upright; noggins added where the stud misses, holding around 35 kg into timber, 15 kg into metal stud with a toggle. The risk we guard against here is a four-hole bracket with two screws in a stud and two in fresh air in Edgware, with 21% one-person households here. Every wall is scanned for studs, pipes and cables before the first hole around Edgware (Northern).
Yes — a batched list is the cheapest way to book us in HA8 in Edgware. Three or more jobs in one half-day slot means one set-up, one parking arrangement and one price of £190 rather than three separate call-outs for Edgware (HA8) addresses, with 21% one-person households here. The estimator above prices the batch, with this being London Borough of Harrow territory, so you see the Edgware figure before committing to anything in this 34% flats neighbourhood.
Like-for-like socket faces, switches and light fittings, yes, tested on completion in this 34% flats neighbourhood. Anything notifiable under Part P — new circuits, a consumer unit, bathroom zones — needs a registered electrician instead for Edgware (HA8) addresses, with Edgware Broadwalk and Watling Street a few streets away. Gas is Gas Safe work full stop, with a median age of 36 in this neighbourhood, so we decline it and point you at an engineer who is registered for it on the Edgware rounds.
Driveways common; the A5 and station gyratory are busy with short bays on Harrow bookings. London Borough of Harrow visitor permits and bay suspensions are arranged and paid for by us and sit inside the quoted price on the Edgware rounds, with 55% owner-occupation locally. Concierge sign-in and goods-lift booking are done before the visit for Edgware (HA8) addresses, with 10% social-rented stock nearby, so the clock starts when the work does.
The van carries the consumables — screws, plugs, resin, hollow-wall anchors, silicone, filler — and they are inside the HA8 figure you were quoted in Edgware, with Edgware Broadwalk and Watling Street a few streets away. Loading for timber or metal stud partition in advance is why a HA8 visit rarely needs a mid-job supply run on Harrow bookings, with 66% of Edgware homes being houses. If you want a specific part supplied, we buy it at cost and show you the receipt; there is no mark-up in this 34% flats neighbourhood, with 10% social-rented stock nearby.
Yes. Every area in Harrow has its own page in Edgware, and we cross borough boundaries constantly. If your address sits on the edge of HA8, book the nearest page and we will confirm the same fixed price on this side of Harrow, with 21% one-person households here.
Source: ONS Census 2021, borough totals via Nomis (table TS008, TS041, TS007A, TS044, TS054, TS003). Figures describe the whole borough, the smallest area ONS publishes every one of these tables for.
Book a handyman in Edgware HA8
Send your job list and a photo of each wall for a fixed written price the same working day. Fixings, permits and taking the packaging away are already in the figure.
Handyman Services reviews from Greater London customers
4.5 ★ from 3,131 Trustpilot reviewsSulltan is the best handyman in London. He is very reliable and professional. I highly recommend.
Quick assembly of a big gas bbq . Friendly service too
Sulltan is the best handyman in London , Highly recommend ......
Read all 3 Handyman Services reviews from Greater London customers →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.