Harrow · HA3 · Handyman
Handyman in Kenton, HA3
Around Kenton Recreation Ground in Kenton, HA3, the stock gives us timber stud partitions inside, cavity brickwork outside — which is why the same shelf takes twenty minutes in one flat and an hour in the next. The usual Harrow instruction is a half-day job list — doors eased, blinds up, shelves fitted, taps re-washered.
- Trustpilot 4.5· 3,100+ reviews
- Google 3.9· 1,429 reviews
- £1m public liability
- Licensed waste carrier CBDU300454
- Since 2019
- £55 an hour, £190 a half day — fixed price for the whole list
- Timber or metal stud partition here, so the fixings are chosen for the wall, not pulled from a pack
- Stud, pipe and cable scan before the first hole, every visit
- London Borough of Harrow permits, ULEZ and packaging removal already inside the price
The service, locally
Handyman work in Kenton
- Per hour, one-hour minimum
- £55Per hour, one-hour minimum
- Kenton homes are flats
- 16%Kenton homes are flats
- Fixed-price jobs
- 14Fixed-price jobs
- Households in Kenton
- 6,923Households in Kenton
Instant estimate
Price your Kenton job list
Estimated for Kenton HA3
£85 – £305
Slot needed: One to two hours
- Flat-pack assembly
- £55 – £190
- Door easing, hinges and closers
- £55 – £140
- One-visit saving
- −£25
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. Batch the list into one visit and you pay for one set-up rather than three. Fixings, plugs and filler are already inside these figures.
How it works
How a Kenton visit works
- Tell us the whole listA photo per wall lets us read the substrate before quoting, so the Kenton HA3 price we send is the price you pay.
- Scan first, drill secondStud, pipe and cable detector out first, dust sheets down, then the anchor that suits timber or metal stud partition.
- Load-tested, then clearedFixings are tested, holes made good, waste leaves in the van, and you sign the list off on site.
- Get my price
Walls and fixings
What is behind the plaster in Kenton
Most likely here
Timber or metal stud partition — Flat conversions and 1960s-onward internal walls
Stud detector, then fix into the upright; noggins added where the stud misses. Realistic load: 35 kg into timber, 15 kg into metal stud with a toggle. What goes wrong: two of four bracket holes on the stud and two in fresh air.
Lath and plaster
Pre-1930 terraces and mansion blocks
- Fixing
- Locate the timber lath studs, fix through into the stud with 5 × 80 mm screws
- Safe load
- Up to 25 kg into a stud, nothing into the plaster itself
- What pulls out
- A plasterboard plug in lime plaster crumbles the key and drops the whole panel
Solid London stock brick
Victorian and Edwardian party and external walls
- Fixing
- 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor
- Safe load
- 40 kg-plus per fixing when anchored into brick, not mortar
- What pulls out
- Fixing into soft lime mortar joints, which spin out under load
Dot-and-dab plasterboard
1990s onward new builds and conversions
- Fixing
- Long fixings through the void into the blockwork behind, or a spread-load anchor
- Safe load
- 30 kg with a through-fixing, 8 kg on a hollow-wall anchor alone
- What pulls out
- Short screws that only grip the board, then lever it off the dabs
Timber or metal stud partition
Flat conversions and 1960s-onward internal walls
- Fixing
- Stud detector, then fix into the upright; noggins added where the stud misses
- Safe load
- 35 kg into timber, 15 kg into metal stud with a toggle
- What pulls out
- Two of four bracket holes on the stud and two in fresh air
Precast concrete and blockwork
Post-war estates and podium blocks
- Fixing
- SDS drill, 8 mm hole, sleeve anchor or screwbolt
- Safe load
- 50 kg-plus per fixing
- What pulls out
- Hitting reinforcement or a buried conduit without a scan first
Insulated dry lining
Retrofitted period homes and low-energy refurbishments
- Fixing
- Insulation-rated frame fixings that reach the masonry beyond the board and foam
- Safe load
- 25 kg, spread across four points
- What pulls out
- Compressing the insulation so the fixing slowly works loose
Why Hello Services
Why Hello Services in Kenton
One visit, one fixed price
Your whole HA3 list quoted in writing the same working day, with no doorstep re-quote for Kenton (HA3) addresses.
The right anchor for the wall
We carry the lot, because a four-hole bracket with two screws in a stud and two in fresh air is what a rushed job leaves behind on HA3 jobs — and 8% social-rented stock nearby, with 16% of homes here being flats.
Permits and parking included
London Borough of Harrow visitor permits and suspensions are arranged and paid for by us on the Kenton rounds.
Fixings and filler included
Screws, plugs, resin, silicone and filler come from the van, not from your invoice in Kenton.
Fixed prices
Handyman prices in Kenton
| Job | From | To | Time on site | What it covers |
|---|---|---|---|---|
| Shelves and floating units | £65 | £180 | 1–3 hrs | Alcove shelving, floating shelves and brackets set to a laser line |
| Locks, handles and door furniture | £70 | £160 | 1–2 hrs | Euro cylinders, mortice locks, thumb turns and handles swapped like for like |
| Radiator bleeding and TRV swaps | £60 | £140 | 1–2 hrs | System bled through, thermostatic valve heads replaced, pressure topped up |
| Door easing, hinges and closers | £55 | £140 | 1–2 hrs | Sticking doors planed and rehung, hinges packed, closers and stops fitted |
| Filling and patching | £70 | £180 | 1–3 hrs | Old fixing holes filled and sanded ready for a check-out inspection |
| Taps, washers and waste traps | £65 | £150 | 1–2 hrs | Dripping taps, isolation valves, sink and basin traps and flexible tails |
Shelves and floating units
£65 – £180
1–3 hrs
Alcove shelving, floating shelves and brackets set to a laser line
Locks, handles and door furniture
£70 – £160
1–2 hrs
Euro cylinders, mortice locks, thumb turns and handles swapped like for like
Radiator bleeding and TRV swaps
£60 – £140
1–2 hrs
System bled through, thermostatic valve heads replaced, pressure topped up
Door easing, hinges and closers
£55 – £140
1–2 hrs
Sticking doors planed and rehung, hinges packed, closers and stops fitted
Filling and patching
£70 – £180
1–3 hrs
Old fixing holes filled and sanded ready for a check-out inspection
Taps, washers and waste traps
£65 – £150
1–2 hrs
Dripping taps, isolation valves, sink and basin traps and flexible tails
Kenton HA3 books this 6-job shortlist more than anything else, because 84% of homes here are houses. All 14 fixed prices sit on the shared reference page.
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. Full price list, fixings matrix and scope policy.
Rates and local costs
Hourly, half day or full day in Kenton
Hourly rate
£55
per hour, one-hour minimum
Best for one or two small jobs — a shelf, a leaking tap washer, a sticking door.
Half day
£190
up to 4 hours
The most-booked slot in London: three to six jobs from one list, one visit, one price.
Full day
£340
up to 8 hours
A snag list, a whole-flat furniture build, or a move-in day of fixings and fittings.
Same-day call-out
£95
first hour, then hourly
Lock, leak, door or safety job that cannot wait for a booked slot.
- Parking and permits
- London Borough of Harrow visitor permits and bay suspensions are arranged, paid for by us and already inside the quoted figure.
- Charging zones
- Harrow sits outside the Congestion Charge zone and inside ULEZ. Our vans are compliant, so ULEZ never appear on your invoice.
- Access and building rules
- Concierge sign-in, goods-lift booking and out-of-hours windows are handled before the visit, so the clock starts when the work does, not in reception.
Screws, plugs, resin anchors, hollow-wall fixings, silicone and filler come out of the van and are inside the price. Anything bought for you — a replacement tap, a door closer, a specific bracket — is charged at cost with the receipt attached to your invoice.
Scope
What is included in Kenton
Included in every visit
- An insured, DBS-checked tradesperson who brings everything needed for a HA3 visit — tools, steps and floor protection.
- Van-stock anchors chosen for timber or metal stud partition, including Stud detector, then fix into the upright; noggins added where the stud misses, at no extra charge.
- Detector before drill, laser line rather than eye, and a load test on each fixing before we sign off.
- easy — driveways and wide roads on almost every street — we plan the Kenton HA3 arrival around it and settle permits with London Borough of Harrow ourselves.
Not included — and why
- Gas appliances and pipework, which legally belong to a Gas Safe engineer.
- Consumer units and new circuits, notifiable work that needs Part P sign-off.
- Anything structural in Kenton HA3: that route starts with London Borough of Harrow building control, and we will point you there.
- Any fixing that would disturb possible asbestos, which is surveyed first as a matter of policy.
The full scope policy, the complete fixings matrix and every fixed price sit on one page: handyman reference.
Coverage
Handyman work around Kenton
Nearby areas we also cover
Guides
Read before you book
Hiring a handyman in the UK: the complete guide
Scope, legal limits, 2026 prices, vetting questions, wall fixings and a job-list method that gets more done in one visit.
18 min read
Handyman prices in London: what jobs actually cost in 2026
Hourly, half-day and fixed job prices, with the London extras that quietly add to a quote.
9 min read
What a handyman can and cannot legally do in the UK
The real line between handyman work and jobs that need a registered electrician, gas or structural trade.
7 min read
Wall fixings guide: which anchor holds in which London wall
The fixing that actually holds in each London wall type, and the realistic load it will take.
8 min read
Related services
Other work we do in Kenton
End of tenancy cleaning
Fixing holes filled and touched in, then the whole Kenton flat cleaned for check-out.
One-off deep cleaning
A HA3 reset after the drilling, sanding and flat-pack dust has settled.
After builders cleaning
Snag list finished by us, then the builders' dust taken out of the Kenton flat.
Moving services
Furniture dismantled in HA3, moved, then rebuilt and re-anchored the same day.
House removals
A full Kenton move where the beds and wardrobes come apart and go back together properly.
House clearance
Old furniture and broken fittings taken away from HA3 before the new ones go up.
About the area
Kenton in context
Most of Kenton reads the same way from the pavement: 1930s semis with driveways and garages, plus a few small flat blocks. timber stud partitions inside is what we meet most in HA3, and Kenton Recreation Ground is the fixed point crews route by.
Uniform interwar semis between Harrow and Wembley, quiet and residential. For a handyman that matters long before the drill comes out: 16% of the 6,923 households around Kenton are flats, and the fabric behind their plaster is timber or metal stud partition. The anchor that suits it is stud detector, then fix into the upright — realistically holding 35 kg into timber, 15 kg into metal stud with a toggle once it is load-tested.
66% of Kenton households own their home and 16% are single-person, which is why so many HA3 bookings are one long list saved up for a single half-day visit at £190. Getting to you is part of the price: easy — driveways and wide roads on almost every street London Borough of Harrow permits and suspensions are arranged and paid for by us, and harrow sits outside the Congestion Charge zone and inside ULEZ.
- 16% flats, 84% houses across 6,923 Kenton households (ONS Census 2021)
- Wall we meet most in HA3: Timber or metal stud partition — stud detector, then fix into the upright
- Access: easy — driveways and wide roads on almost every street
- Covering HA3 and the streets around Kenton Recreation Ground, from £55 an hour
Where Kenton sits in our coverage
Kenton is one of the neighbourhoods on our handyman work in Harrow page, which sits under handyman work across London. Same-week crews working this postcode also cover handyman work in Wealdstone and Harrow Weald HA3 (under ½ mile), handyman work in Harrow HA1 (1.2 miles), handyman work in Edgware HA8 (2.4 miles), handyman work in Wembley HA9 (2.8 miles) and handyman work in Kingsbury NW9 (2.9 miles). If your address sits on the boundary, book the closest page — the price and the crew are the same. For every trade we run at this postcode, see all services in Kenton.
Most booked alongside this in Kenton
Kenton HA3 at a glance
- Area
- Kenton, Harrow
- Postcodes served
- HA3
- Nearest station
- Kenton (Bakerloo, Overground)
- Dominant wall construction
- timber stud partitions inside, cavity brickwork outside
- Fixing we use most
- Stud detector, then fix into the upright; noggins added where the stud misses
- Realistic load
- 35 kg into timber, 15 kg into metal stud with a toggle
- Most-booked list
- a half-day job list — doors eased, blinds up, shelves fitted, taps re-washered
- Watch out for
- a four-hole bracket with two screws in a stud and two in fresh air
- Charging zones
- Harrow sits outside the Congestion Charge zone and inside ULEZ
- Residents (Kenton)
- 22,689
- Households (Kenton)
- 6,923
- Typical visit
- Half a day in HA3
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhoods Kenton East, Kenton West (E02000449, E02006882) — the published geography that covers Kenton, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL).
Questions
Kenton HA3 handyman questions
£55 an hour with a one-hour minimum, £190 for a half day and £340 for a full day in HA3 in Kenton, with 26% of HA3 homes being privately rented. Fixed-price jobs start at £55 — flat-pack from £55, TV mounting from £85, shelving from £65 around Kenton (Bakerloo, Overground), with Kenton Recreation Ground a few streets away. Send the list and we confirm one written figure on HA3 jobs.
Yes. Locally that usually means timber or metal stud partition — stud detector on the Kenton rounds — and 84% of Kenton homes being houses, with this being a short walk from Kenton (Bakerloo, Overground), then fix into the upright; noggins added where the stud misses, holding around 35 kg into timber, 15 kg into metal stud with a toggle. The risk we guard against here is a four-hole bracket with two screws in a stud and two in fresh air on HA3 jobs, with 66% owner-occupation locally. Every wall is scanned for studs, pipes and cables before the first hole on the streets near Kenton Recreation Ground.
Batching is the whole point of a HA3 half-day slot in this 16% flats neighbourhood. One arrival, one set of dust sheets and one London Borough of Harrow permit covers the whole list instead of being repeated per visit for Kenton (HA3) addresses, with 8% social-rented stock nearby. Photos of each HA3 wall let us sequence the list so the noisy drilling is done in one block on the Kenton rounds, with 26% of HA3 homes being privately rented.
Like-for-like socket faces, switches and light fittings, yes, tested on completion on the streets near Kenton Recreation Ground. We stop at Part P: no new circuits, no consumer units, no bathroom electrics across HA3. Gas is Gas Safe work full stop, with 8% social-rented stock nearby, so we decline it and point you at an engineer who is registered for it on the Kenton rounds.
Easy — driveways and wide roads on almost every street on the streets near Kenton Recreation Ground. London Borough of Harrow visitor permits and bay suspensions are arranged and paid for by us and sit inside the quoted price for Kenton (HA3) addresses, with 16% of homes here being flats. Concierge sign-in and goods-lift booking are done before the visit on the Kenton rounds, with Harrow parking rules in play, so the clock starts when the work does.
The van carries the consumables — screws, plugs, resin, hollow-wall anchors, silicone, filler — and they are inside the HA3 figure you were quoted across HA3, with this being a short walk from Kenton (Bakerloo, Overground). Because timber or metal stud partition is what we expect here, the right anchors for it are on board before the van sets off on the Kenton rounds, with 66% owner-occupation locally. If you want a specific part supplied, we buy it at cost and show you the receipt; there is no mark-up on HA3 jobs, with 8% social-rented stock nearby.
Yes. Every area in Harrow has its own page for Kenton (HA3) addresses, and we cross borough boundaries constantly. If your address sits on the edge of HA3, book the nearest page and we will confirm the same fixed price on the Kenton rounds, with this being a short walk from Kenton (Bakerloo, Overground).
Source: ONS Census 2021, borough totals via Nomis (table TS008, TS041, TS007A, TS044, TS054, TS003). Figures describe the whole borough, the smallest area ONS publishes every one of these tables for.
Book a handyman in Kenton HA3
Send your job list and a photo of each wall for a fixed written price the same working day. Fixings, permits and taking the packaging away are already in the figure.
Handyman Services reviews from Greater London customers
4.5 ★ from 3,131 Trustpilot reviewsSulltan is the best handyman in London. He is very reliable and professional. I highly recommend.
Quick assembly of a big gas bbq . Friendly service too
Sulltan is the best handyman in London , Highly recommend ......
Read all 3 Handyman Services reviews from Greater London customers →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.