Camden · NW3 · Factory and industrial clearance
Same-week slots · Fully insured · Local Swiss Cottage fitters · Fixed written pricesLooking for factory and industrial clearance in Swiss Cottage NW3? We work in Swiss Cottage most weeks — finchley Road's shops and library beside 1930s flats and post-war blocks — and price factory and industrial clearance against that reality rather than a London average. Fixed written quote from £680, insured fitters, every fixing torqued, and the flat-pack packaging taken away.
Overview
This page prices factory and industrial clearance for Swiss Cottage NW3 specifically: mainly Victorian stock, 46% privately rented and 3,083 households in total. Work starts at £680, fixed in writing, with parking and London Borough of Camden permit rules costed before an insured fitter travels.
How it works
Step 1
Every machine, rack and pallet is listed with a recover, resell or recycle decision against it, so nothing valuable leaves as waste by accident.
Step 2
We work only to plant that has been certified isolated, and we say so in writing rather than assuming the last shift switched it off.
Step 3
Consumables and benching first, then racking, then plant, so the floor stays clear enough to move the heavy items last.
Step 4
Ferrous, non-ferrous, WEEE and general are weighed separately, which is how the scrap credit on your invoice is calculated.
Step 5
Swarf and dust removed, floor swept, photographs and paperwork issued for the dilapidations claim.
Why choose us
Upper-tier waste carrier registration with consignment paperwork for WEEE, oils and hazardous streams, plus a waste transfer note per load. Scrap is weighed on a certificated weighbridge so the credit on your invoice is auditable.
Three to six operatives depending on the plant, with skates, pallet trucks and a tail-lift 7.5t as standard and a HIAB where a machine cannot be moved to the bay by hand. Finchley Road is a red route; loading is from side streets with permits and lift booking in the blocks.
Five to ten working days for a full unit, since the survey, isolation certificates and estate access all have to be in place first. A part clear around a working line can usually start within a week. Swiss Cottage (Jubilee) is the nearest station, so a NW3 visit rarely needs a whole morning set aside.
We expect with solid brick on the party and external walls, over lath and plaster over timber studs, measured on the walk in from Swiss Cottage (Jubilee) rather than assumed from a map in NW3, and we carry the anchors, through-fixings and long bits that match. The mistake we spend most time undoing here is a plasterboard plug spun into lime plaster; locally that also means which crumbles the key and drops the panel, a median age of 35 in this neighbourhood shapes what gets ordered here.
Fixed prices
| Job | From | Typical time | What sets the price |
|---|---|---|---|
| Part clear, single production line | £680 | 6–8 hrs | One line stripped of tooling, benching and consumables while the rest of the unit keeps running, which is slower than clearing an empty floor. |
| Full unit clearance, up to 5,000 sq ft | £1,850 | 1–2 days | Priced by floor area and the density of what is left, since a light assembly unit and a machine shop of the same size are nothing alike to clear. |
| Machinery removal, per item | £320 | 2–4 hrs | Bolted-down plant has to be disconnected, jacked, skated to the door and loaded — that is rigging labour, not clearance labour. |
| Scrap metal recovery, per tonne | Credit | By load | Steel, copper and aluminium carry a resale value that we credit against the invoice rather than quietly keeping, which is what makes a metal-heavy unit cheaper to clear than an office of the same size. |
| WEEE and electrical plant, per pallet | £185 | 1–2 hrs | Motors, control panels and powered plant fall under WEEE and move on consignment paperwork to a permitted treatment facility. |
| Post-clear industrial sweep | £380 | 3–5 hrs | Swarf, oil residue and dust removed so the unit meets the dilapidations standard rather than merely being empty. |
Part clear, single production line
£680 · 6–8 hrs
One line stripped of tooling, benching and consumables while the rest of the unit keeps running, which is slower than clearing an empty floor.
Full unit clearance, up to 5,000 sq ft
£1,850 · 1–2 days
Priced by floor area and the density of what is left, since a light assembly unit and a machine shop of the same size are nothing alike to clear.
Machinery removal, per item
£320 · 2–4 hrs
Bolted-down plant has to be disconnected, jacked, skated to the door and loaded — that is rigging labour, not clearance labour.
Scrap metal recovery, per tonne
Credit · By load
Steel, copper and aluminium carry a resale value that we credit against the invoice rather than quietly keeping, which is what makes a metal-heavy unit cheaper to clear than an office of the same size.
WEEE and electrical plant, per pallet
£185 · 1–2 hrs
Motors, control panels and powered plant fall under WEEE and move on consignment paperwork to a permitted treatment facility.
Post-clear industrial sweep
£380 · 3–5 hrs
Swarf, oil residue and dust removed so the unit meets the dilapidations standard rather than merely being empty.
Industrial clearance is quoted plus VAT at 20% after a site survey, because floor area alone does not describe a unit. Scrap value is credited back on the invoice. Consignment notes for hazardous streams, transfer notes, ULEZ and any estate access charges are itemised separately.
Scope
The guys arrived prompt at 9 am . Sorry I’m rubbish at names but I remember the one guys initials were AB . He really worked hard . Both guys were very polite and were happy to pop back up the stairs to finish dusting the bedrooms surfaces that were missed . Not one moan… Read in full →
Hannah and her friend were friendly and thoughtful. They were very professional and hard working. They also turned a junk room into a nice bedroom. I cannot thank them or praise them enough.
This was my second job for Hello services and I was delighted to have Adam and Sultan back again. I had furniture assembly and clearance work to be done, and again it was done very professionally to a very high standard, and with absolute politeness at all times. They did an excellent job yet again… Read in full →
Read all 8 business clearance reviews →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.
Coverage
Also in this area
The parent commercial silo — offices, units, shops and estate handovers.
Rubble, plasterboard and strip-out waste removed with transfer notes issued.
Desks, chairs, IT and storage cleared out of hours to a handover date.
Mixed loads collected by volume with a same-day waste transfer note.
Working in Swiss Cottage
In Swiss Cottage (NW3) the split is 89% flats to 11% houses over 3,083 households, and the stock is mainly Victorian.
With 46% private renting against 33% owner-occupied, most NW3 bookings land on a move-in day rather than a weekend.
Walls are with solid brick on the party and external walls, over lath and plaster over timber studs, measured on the walk in from Swiss Cottage (Jubilee) rather than assumed from a map, so the fixing that matters in Swiss Cottage is chosen on site — the usual failure here is a plasterboard plug spun into lime plaster; locally that also means which crumbles the key and drops the panel, a median age of 35 in this neighbourhood shapes what gets ordered here.
Finchley Road's shops and library beside 1930s flats and post-war blocks. That character decides the practical detail of factory and industrial clearance here far more than the borough boundary does. Swiss Cottage sits inside the Congestion Charge zone as well as ULEZ, so both are itemised on the quote rather than absorbed into an hourly rate.
Getting to the door matters as much as the job: finchley Road is a red route; loading is from side streets with permits and lift booking in the blocks. Swiss Cottage (Jubilee) is the nearest station, and three to six operatives depending on the plant, with skates, pallet trucks and a tail-lift 7.5t as standard and a HIAB where a machine cannot be moved to the bay by hand.
Area at a glance
Who lives in Swiss Cottage and what they live in decides how factory and industrial clearance is quoted and how long a visit takes. These are the published Census 2021 figures for the Swiss Cottage neighbourhood itself — not Camden-wide averages, and not estimates.
7,117
Residents
Swiss Cottage neighbourhood, Census 2021
3,083
Households
Median age 35.2
Flats vs houses
Residents by sex
Single-person households
35.7%
Privately rented
45.9%
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhood Swiss Cottage (E02000182) — the published geography that covers Swiss Cottage, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL). Coordinates for the NW3 district: 51.5523, -0.1725 — Outward postcode centroid, postcodes.io (Ordnance Survey Open Data).
Part clear, single production line starts at £680 in Swiss Cottage across NW3, with 21% social-rented stock nearby, and every job is quoted as a fixed written price before a fitter is booked. The density and type of what is being removed on the Swiss Cottage rounds. Metal-heavy units carry a scrap credit that can cut the invoice substantially; units full of mixed production waste, plastics and contaminated packaging cost more at the gate and take longer to segregate for Swiss Cottage (NW3) addresses — and 11% of Swiss Cottage homes being houses, with this being a short walk from Swiss Cottage (Jubilee).
Yes — IKEA, Argos, Wayfair, Made and independent brands are all built to the manufacturer's instructions on Camden bookings, with this being London Borough of Camden territory. We are independent of every retailer; the names simply describe what we assemble in Swiss Cottage most weeks in this 89% flats neighbourhood, with 89% of homes here being flats.
In Swiss Cottage, 5–2 hours. Sliding-door and corner wardrobes take two to four times as long because the tracks have to be dead level on this side of Camden, with Camden parking rules in play. That covers local factory and industrial clearance on Swiss Cottage jobs too.
That is exactly why we build in the room it will live in on the Swiss Cottage rounds. With 89% of Swiss Cottage homes being flats, narrow hallways and tight turns are the norm on Camden bookings, with 3,083 households on this patch — and 21% social-rented stock nearby, so anything that will not pass a doorway once assembled is built where it stands.
Swiss Cottage Library by Basil Spence is the marker we route to around Swiss Cottage (Jubilee), with this being a short walk from Swiss Cottage (Jubilee), and finchley Road is a red route; loading is from side streets with permits and lift booking in the blocks. A NW3 slot added to an existing Camden round usually lands the same week rather than the next in Swiss Cottage, with a median age of 35 in this neighbourhood.
Five to ten working days for a full unit, since the survey, isolation certificates and estate access all have to be in place first in Swiss Cottage, with this being a short walk from Swiss Cottage (Jubilee). A part clear around a working line can usually start within a week around Swiss Cottage (Jubilee). Swiss Cottage sits close to Swiss Cottage (Jubilee) on the streets near Swiss Cottage Library by Basil Spence, with 21% social-rented stock nearby, so we can usually add a NW3 job to an existing Camden round at short notice.
Finchley Road is a red route; loading is from side streets with permits and lift booking in the blocks in this 89% flats neighbourhood, with 21% social-rented stock nearby. Where a permit or a suspended bay is needed in London Borough of Camden it is itemised on the quote before the visit, never added afterwards on Camden bookings — and 46% of NW3 homes being privately rented, with 11% of Swiss Cottage homes being houses.
Read next
Handyman
Hourly rates, half-day jobs and the questions worth asking before booking.
Assembly
Which builds are a two-hour job and which reliably eat a weekend.
Assembly
Wardrobes, beds and kitchen units built and levelled the same day.
Free quote · 1-hour reply
Two ways to go: price it yourself on the quote page, or pick a slot on the live booking calendar. Swiss Cottage NW3 jobs are confirmed in writing before anyone travels, and the same crew covers the rest of camden.
No deposit is taken until the price and slot are confirmed in writing.
