Camden · NW3 · Factory and industrial clearance
Same-week slots · Fully insured · Local Belsize Park fitters · Fixed written pricesLooking for factory and industrial clearance in Belsize Park NW3? We work in Belsize Park most weeks — stucco villas and mansion blocks on the slope between Hampstead and Chalk Farm — and price factory and industrial clearance against that reality rather than a London average. Fixed written quote from £680, insured fitters, every fixing torqued, and the flat-pack packaging taken away.
Overview
Factory and industrial clearance in Belsize Park NW3 is a fixed-price visit for renter-heavy homes in Camden, most of them mainly Victorian. 3,000 households sit inside this NW3 patch, 93% of them flats, so we quote on access near Belsize Village rather than a London average.
How it works
Step 1
Every machine, rack and pallet is listed with a recover, resell or recycle decision against it, so nothing valuable leaves as waste by accident.
Step 2
We work only to plant that has been certified isolated, and we say so in writing rather than assuming the last shift switched it off.
Step 3
Consumables and benching first, then racking, then plant, so the floor stays clear enough to move the heavy items last.
Step 4
Ferrous, non-ferrous, WEEE and general are weighed separately, which is how the scrap credit on your invoice is calculated.
Step 5
Swarf and dust removed, floor swept, photographs and paperwork issued for the dilapidations claim.
Why choose us
Five to ten working days for a full unit, since the survey, isolation certificates and estate access all have to be in place first. A part clear around a working line can usually start within a week. Belsize Park (Northern) is the nearest station, so a NW3 visit rarely needs a whole morning set aside.
We expect lath and plaster over timber studs in NW3, with solid brick on the party and external walls, which is why London Borough of Camden kerb rules get settled before the van is loaded in NW3, and we carry the anchors, through-fixings and long bits that match. The mistake we spend most time undoing here is a plasterboard plug spun into lime plaster in NW3, which crumbles the key and drops the panel, which is what a 93% flat share across the ONS neighbourhood covering Belsize Park actually produces.
Upper-tier waste carrier registration with consignment paperwork for WEEE, oils and hazardous streams, plus a waste transfer note per load. Scrap is weighed on a certificated weighbridge so the credit on your invoice is auditable.
Three to six operatives depending on the plant, with skates, pallet trucks and a tail-lift 7.5t as standard and a HIAB where a machine cannot be moved to the bay by hand. Resident-permit streets, hill gradients and conversion flats up three or four flights.
Fixed prices
| Job | From | Typical time | What sets the price |
|---|---|---|---|
| Part clear, single production line | £680 | 6–8 hrs | One line stripped of tooling, benching and consumables while the rest of the unit keeps running, which is slower than clearing an empty floor. |
| Full unit clearance, up to 5,000 sq ft | £1,850 | 1–2 days | Priced by floor area and the density of what is left, since a light assembly unit and a machine shop of the same size are nothing alike to clear. |
| Machinery removal, per item | £320 | 2–4 hrs | Bolted-down plant has to be disconnected, jacked, skated to the door and loaded — that is rigging labour, not clearance labour. |
| Scrap metal recovery, per tonne | Credit | By load | Steel, copper and aluminium carry a resale value that we credit against the invoice rather than quietly keeping, which is what makes a metal-heavy unit cheaper to clear than an office of the same size. |
| WEEE and electrical plant, per pallet | £185 | 1–2 hrs | Motors, control panels and powered plant fall under WEEE and move on consignment paperwork to a permitted treatment facility. |
| Post-clear industrial sweep | £380 | 3–5 hrs | Swarf, oil residue and dust removed so the unit meets the dilapidations standard rather than merely being empty. |
Part clear, single production line
£680 · 6–8 hrs
One line stripped of tooling, benching and consumables while the rest of the unit keeps running, which is slower than clearing an empty floor.
Full unit clearance, up to 5,000 sq ft
£1,850 · 1–2 days
Priced by floor area and the density of what is left, since a light assembly unit and a machine shop of the same size are nothing alike to clear.
Machinery removal, per item
£320 · 2–4 hrs
Bolted-down plant has to be disconnected, jacked, skated to the door and loaded — that is rigging labour, not clearance labour.
Scrap metal recovery, per tonne
Credit · By load
Steel, copper and aluminium carry a resale value that we credit against the invoice rather than quietly keeping, which is what makes a metal-heavy unit cheaper to clear than an office of the same size.
WEEE and electrical plant, per pallet
£185 · 1–2 hrs
Motors, control panels and powered plant fall under WEEE and move on consignment paperwork to a permitted treatment facility.
Post-clear industrial sweep
£380 · 3–5 hrs
Swarf, oil residue and dust removed so the unit meets the dilapidations standard rather than merely being empty.
Industrial clearance is quoted plus VAT at 20% after a site survey, because floor area alone does not describe a unit. Scrap value is credited back on the invoice. Consignment notes for hazardous streams, transfer notes, ULEZ and any estate access charges are itemised separately.
Scope
The guys arrived prompt at 9 am . Sorry I’m rubbish at names but I remember the one guys initials were AB . He really worked hard . Both guys were very polite and were happy to pop back up the stairs to finish dusting the bedrooms surfaces that were missed . Not one moan… Read in full →
Hannah and her friend were friendly and thoughtful. They were very professional and hard working. They also turned a junk room into a nice bedroom. I cannot thank them or praise them enough.
This was my second job for Hello services and I was delighted to have Adam and Sultan back again. I had furniture assembly and clearance work to be done, and again it was done very professionally to a very high standard, and with absolute politeness at all times. They did an excellent job yet again… Read in full →
Read all 8 business clearance reviews →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.
Coverage
Also in this area
The parent commercial silo — offices, units, shops and estate handovers.
Rubble, plasterboard and strip-out waste removed with transfer notes issued.
Desks, chairs, IT and storage cleared out of hours to a handover date.
Mixed loads collected by volume with a same-day waste transfer note.
Working in Belsize Park
In Belsize Park (NW3) the split is 93% flats to 7% houses over 3,000 households, and the stock is mainly Victorian.
Because 51% of Belsize Park is privately rented and 10% socially rented, a lot of NW3 work is agreed with a landlord or managing agent rather than the person opening the door.
Belsize Park substrates run to lath and plaster over timber studs in NW3, with solid brick on the party and external walls, which is why London Borough of Camden kerb rules get settled before the van is loaded. Nothing is drilled until the wall has been sounded, because a plasterboard plug spun into lime plaster in NW3, which crumbles the key and drops the panel, which is what a 93% flat share across the ONS neighbourhood covering Belsize Park actually produces is the mistake that costs a NW3 customer twice.
Belsize Park sits inside the Congestion Charge zone as well as ULEZ, so both are itemised on the quote rather than absorbed into an hourly rate. What shapes the job more is the neighbourhood itself — stucco villas and mansion blocks on the slope between Hampstead and Chalk Farm — which is why a NW3 quote is not a Camden average.
Resident-permit streets, hill gradients and conversion flats up three or four flights. Nearest station is Belsize Park (Northern), and three to six operatives depending on the plant, with skates, pallet trucks and a tail-lift 7.5t as standard and a HIAB where a machine cannot be moved to the bay by hand.
Area at a glance
Who lives in Belsize Park and what they live in decides how factory and industrial clearance is quoted and how long a visit takes. These are the published Census 2021 figures for the Belsize Park neighbourhood itself — not Camden-wide averages, and not estimates.
5,914
Residents
Belsize Park neighbourhood, Census 2021
3,000
Households
Median age 37.8
Flats vs houses
Residents by sex
Single-person households
44.8%
Privately rented
50.7%
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhood Belsize Park (E02000176) — the published geography that covers Belsize Park, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL). Coordinates for the NW3 district: 51.5523, -0.1725 — Outward postcode centroid, postcodes.io (Ordnance Survey Open Data).
Part clear, single production line starts at £680 in Belsize Park across NW3 — and a median age of 38 in this neighbourhood, with 39% owner-occupation locally, and every job is quoted as a fixed written price before a fitter is booked. The density and type of what is being removed on this side of Camden. Metal-heavy units carry a scrap credit that can cut the invoice substantially; units full of mixed production waste, plastics and contaminated packaging cost more at the gate and take longer to segregate on NW3 jobs — and 39% owner-occupation locally, with 51% of NW3 homes being privately rented.
Yes — IKEA, Argos, Wayfair, Made and independent brands are all built to the manufacturer's instructions across NW3, with 93% of homes here being flats. We are independent of every retailer; the names simply describe what we assemble in Belsize Park most weeks on the streets near Belsize Village, with Camden parking rules in play.
5–2 hours. Sliding-door and corner wardrobes take two to four times as long because the tracks have to be dead level on the Belsize Park rounds, with 45% one-person households here.
That is exactly why we build in the room it will live in on the Belsize Park rounds. With 93% of Belsize Park homes being flats, narrow hallways and tight turns are the norm on Camden bookings, with 93% of homes here being flats, so anything that will not pass a doorway once assembled is built where it stands.
Belsize Village is the marker we route to on Camden bookings, with 51% of NW3 homes being privately rented, and resident-permit streets, hill gradients and conversion flats up three or four flights. A NW3 slot added to an existing Camden round usually lands the same week rather than the next on the Belsize Park rounds, with this being a short walk from Belsize Park (Northern).
Five to ten working days for a full unit, since the survey, isolation certificates and estate access all have to be in place first on Camden bookings, with Belsize Village a few streets away. A part clear around a working line can usually start within a week on the streets near Belsize Village. Belsize Park sits close to Belsize Park (Northern) on NW3 jobs, with this being a short walk from Belsize Park (Northern), so we can usually add a NW3 job to an existing Camden round at short notice.
Resident-permit streets, hill gradients and conversion flats up three or four flights around Belsize Park (Northern). Where a permit or a suspended bay is needed in London Borough of Camden it is itemised on the quote before the visit, never added afterwards across NW3 — and 3,000 households on this patch, with 93% of homes here being flats.
Read next
Handyman
Hourly rates, half-day jobs and the questions worth asking before booking.
Assembly
Which builds are a two-hour job and which reliably eat a weekend.
Assembly
Wardrobes, beds and kitchen units built and levelled the same day.
Free quote · 1-hour reply
Two ways to go: price it yourself on the quote page, or pick a slot on the live booking calendar. Belsize Park NW3 jobs are confirmed in writing before anyone travels, and the same crew covers the rest of camden.
No deposit is taken until the price and slot are confirmed in writing.
