Booked around your day
Most builds are booked within a week, longer in spring when garden project demand peaks across London. Kenley (Southern) is the nearest station, so a CR8 visit rarely needs a whole morning set aside.
Croydon · CR8 · Shed assembly
Same-week slots · Fully insured · Local Kenley fitters · Fixed written pricesLooking for shed assembly in Kenley CR8? We work in Kenley most weeks — airfield common, wooded valleys and large houses on steep plots — and price shed assembly against that reality rather than a London average. Fixed written quote from £140, insured fitters, the frame squared before roofing and anchors fitted where needed.


Overview
This page prices shed assembly for Kenley CR8 specifically: post-war stock, 12% privately rented and 5,051 households in total. Work starts at £140, fixed in writing, with parking and London Borough of Croydon permit rules costed before an insured fitter travels.
How it works
Step 1
Base checked for level and size, and the shed's height and position checked against the garden's remaining permitted development allowance.
Step 2
Panels, roof struts and fixings checked against the parts list — a shed with a bent panel or a short bag of screws is found before the frame goes up, not halfway through.
Step 3
Floor and wall panels built up and squared before the roof goes on, since an out-of-square frame is what makes doors stick.
Step 4
Roof panels fitted, felt or shingle lapped correctly and any window or vent sealed.
Step 5
Ground anchors or wall straps fitted in exposed gardens, doors hung and eased, packaging taken away.
Why choose us
Most builds are booked within a week, longer in spring when garden project demand peaks across London. Kenley (Southern) is the nearest station, so a CR8 visit rarely needs a whole morning set aside.
We expect solid London stock brick; locally that also means some of it dry-lined during a later refurbishment, measured on the walk in from Kenley (Southern) rather than assumed from a map in CR8, and we carry the anchors, through-fixings and long bits that match. The mistake we spend most time undoing here is fixings landing in soft lime mortar joints instead of the brick body, as the Kenley stock goes, where 76% owner-occupation means the same home is booked again rather than a new tenant each year.
Fitters carry £5m public liability cover. Most garden sheds fall under permitted development if they sit under 2.5m at the eaves within 2m of a boundary and the total of all outbuildings stays under 50% of the garden — we flag it if a build looks close to either limit rather than assume it is fine.
One fitter for a small shed on a ready base; two for anything over 8x6ft or where roof panels need lifting together. Very steep private drives, narrow lanes and limited turning space.
Fixed prices
| Job | From | Typical time | What sets the price |
|---|---|---|---|
| Small shed up to 6x4ft, base ready | £140 | 2–3 hrs | A one-piece or simple panel shed on an existing slab, framed, roofed and felted in a morning. |
| Medium shed 8x6ft, base ready | £220 | 3–5 hrs | More panels and a ridged roof mean more bracing before the structure is rigid enough to felt. |
| Large shed or workshop 10x8ft+, base ready | £320 | 5–7 hrs | Heavier framing, often double doors and a window, and usually a two-person lift for the roof panels. |
| Paving-slab base, per m² | £45 | By area | Compacted hardcore and a sand bed under the slabs, laid to a slight fall so water runs away from the shed floor. |
| Timber bearer base on an existing hard surface | £85 | 2–3 hrs | Pressure-treated bearers levelled and packed to keep the shed floor off standing water without a full slab. |
| Anchor kit for an exposed or elevated garden | £60 | 45–60 min | Ground anchors or wall straps fitted so the shed does not lift in a gust funnelled between two terraces. |
Small shed up to 6x4ft, base ready
£140 · 2–3 hrs
A one-piece or simple panel shed on an existing slab, framed, roofed and felted in a morning.
Medium shed 8x6ft, base ready
£220 · 3–5 hrs
More panels and a ridged roof mean more bracing before the structure is rigid enough to felt.
Large shed or workshop 10x8ft+, base ready
£320 · 5–7 hrs
Heavier framing, often double doors and a window, and usually a two-person lift for the roof panels.
Paving-slab base, per m²
£45 · By area
Compacted hardcore and a sand bed under the slabs, laid to a slight fall so water runs away from the shed floor.
Timber bearer base on an existing hard surface
£85 · 2–3 hrs
Pressure-treated bearers levelled and packed to keep the shed floor off standing water without a full slab.
Anchor kit for an exposed or elevated garden
£60 · 45–60 min
Ground anchors or wall straps fitted so the shed does not lift in a gust funnelled between two terraces.
Prices are labour to build the kit you supply, on a base that is level and ready. Roofing felt, fixings and standard anchor kits are included; a bespoke concrete base is quoted separately by the m². We flag before booking where a build looks close to the 2.5m eaves height or 50%-of-garden permitted development limits so you can check before ordering. Permits, ULEZ and the Congestion Charge where they apply are itemised.
Scope
Sulltan is the best handyman in London. He is very reliable and professional. I highly recommend.
Really pleased with our house move. The guys came on time, loaded everything carefully like a huge jigsaw! Nothing got broken and even though they were working on an hourly rate they were really efficient, not to waste any time. Our only criticism is that we needed a few items disassembled to get on the… Read in full →
Sulltan is the best handyman in London , Highly recommend ......
Read all 48 flat-pack assembly reviews →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.
Coverage
Also in this area
Garden sets, loungers, BBQs, parasols and shed bases built outside and weather-fixed.
Fitted and flat-pack wardrobes scribed to the wall and anchored so doors stay square.
TVs, mirrors, shelves and curtain poles fixed into the wall you actually have, in one visit.
Wardrobes, beds, desks and storage built, levelled and anchored to the wall.
Sheds emptied, dismantled and the base left clear and swept.
Working in Kenley
In Kenley (CR8) the split is 21% flats to 79% houses over 5,051 households, and the stock is post-war.
Because 12% of Kenley is privately rented and 12% socially rented, a lot of CR8 work is agreed with a landlord or managing agent rather than the person opening the door.
Expect solid London stock brick; locally that also means some of it dry-lined during a later refurbishment, measured on the walk in from Kenley (Southern) rather than assumed from a map behind the plaster in CR8. That is why fixings are picked in the room rather than off a van shelf, and why fixings landing in soft lime mortar joints instead of the brick body, as the Kenley stock goes, where 76% owner-occupation means the same home is booked again rather than a new tenant each year is the fault we are called back to undo.
Kenley is outside the Congestion Charge zone but inside ULEZ; our vehicles are compliant, so nothing is added for it. What shapes the job more is the neighbourhood itself — airfield common, wooded valleys and large houses on steep plots — which is why a CR8 quote is not a Croydon average.
On access, very steep private drives, narrow lanes and limited turning space — one reason one fitter for a small shed on a ready base; two for anything over 8x6ft or where roof panels need lifting together. Fitters travelling in use Kenley (Southern).
Area at a glance
Who lives in Kenley and what they live in decides how shed assembly is quoted and how long a visit takes. These are the published Census 2021 figures for the Kenley North and Kenley South neighbourhood itself — not Croydon-wide averages, and not estimates.
13,255
Residents
Kenley North and Kenley South neighbourhood, Census 2021
5,051
Households
Median age 40.7
Flats vs houses
Residents by sex
Single-person households
21.2%
Privately rented
11.9%
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhoods Kenley North, Kenley South (E02000233, E02000235) — the published geography that covers Kenley, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL). Coordinates for the CR8 district: 51.3319, -0.1144 — Outward postcode centroid, postcodes.io (Ordnance Survey Open Data).
Small shed up to 6x4ft, base ready starts at £140 in Kenley across CR8, with this being a short walk from Kenley (Southern) — and Kenley Aerodrome and Common a few streets away, and every job is quoted as a fixed written price before a fitter is booked. Shed size and whether the base already exists. A slab or bearer base adds a separate charge but saves the shed floor from sitting on wet grass or bare soil through its first winter on CR8 jobs — and 21% of homes here being flats, with Kenley Aerodrome and Common a few streets away.
5m at the eaves within 2m of a boundary and all outbuildings together stay under half the garden across CR8, with 79% of Kenley homes being houses. Many gardens in Kenley are small enough that a large shed pushes close to that limit — we check before booking rather than after the kit is built on the streets near Kenley Aerodrome and Common — and 21% one-person households here, with 12% social-rented stock nearby.
Yes — a paving-slab base is £45/m², with 12% of CR8 homes being privately rented, or a timber bearer base from £85 where a full slab isn't needed for Kenley (CR8) addresses. With 79% of Kenley homes being houses with a garden, most jobs here are base-plus-build in one visit on the streets near Kenley Aerodrome and Common, with this being a short walk from Kenley (Southern).
Not once anchored. Terraced gardens funnel wind between the houses more than an open plot does, so we fit ground anchors or wall straps as standard rather than leave it to the kit's own fixings across CR8 — and this being London Borough of Croydon territory, with 12% of CR8 homes being privately rented, which is fixings landing in soft lime mortar joints instead of the brick body, as the Kenley stock goes, where 76% owner-occupation means the same home is booked again rather than a new tenant each year on unanchored builds we're called back to.
Laying a full concrete slab base — quoted separately as a groundworks job; Electrical supply to the shed on the streets near Kenley Aerodrome and Common, with 21% one-person households here — and Kenley Aerodrome and Common a few streets away, which needs a registered electrician for the armoured cable and consumer unit work; Party wall or boundary consent where a shed sits within 2m of a neighbour's fence and exceeds the height limit. Anything outside that scope is quoted separately so the Kenley CR8 price you agree is the price you pay across CR8, with Croydon parking rules in play.
All three. With 12% of Kenley privately rented and 76% owner-occupied, roughly half the CR8 diary is agent- or landlord-instructed and invoiced separately from the person at the door on the streets near Kenley Aerodrome and Common — and 76% owner-occupation locally, with 79% of Kenley homes being houses.
Kenley Aerodrome and Common is the marker we route to across CR8, with 76% owner-occupation locally, and very steep private drives, narrow lanes and limited turning space. A CR8 slot added to an existing Croydon round usually lands the same week rather than the next on this side of Croydon, with 5,051 households on this patch.
Read next
Handyman
Hourly rates, half-day jobs and the questions worth asking before booking.
Assembly
Which builds are a two-hour job and which reliably eat a weekend.
Assembly
Wardrobes, beds and kitchen units built and levelled the same day.
Free quote · 1-hour reply
Two ways to go: price it yourself on the quote page, or pick a slot on the live booking calendar. Kenley CR8 jobs are confirmed in writing before anyone travels, and the same crew covers the rest of croydon.
No deposit is taken until the price and slot are confirmed in writing.