Enfield · N9 · Handyman
Handyman in Edmonton, N9
Around Edmonton Green Market in Edmonton, N9, the stock gives us precast concrete panels and dense blockwork, often with surface conduit — which is why the same shelf takes twenty minutes in one flat and an hour in the next. The usual Enfield instruction is safety fixings, door furniture and shelving drilled into concrete with an SDS.
- Trustpilot 4.5· 3,100+ reviews
- Google 3.9· 1,429 reviews
- £1m public liability
- Licensed waste carrier CBDU300454
- Since 2019
- £55 an hour, £190 a half day — fixed price for the whole list
- Precast concrete and blockwork here, so the fixings are chosen for the wall, not pulled from a pack
- Stud, pipe and cable scan before the first hole, every visit
- London Borough of Enfield permits, ULEZ and packaging removal already inside the price
The service, locally
Handyman work in Edmonton
- Per hour, one-hour minimum
- £55Per hour, one-hour minimum
- Edmonton homes are flats
- 47%Edmonton homes are flats
- Fixed-price jobs
- 14Fixed-price jobs
- Households in Edmonton
- 17,818Households in Edmonton
Instant estimate
Price your Edmonton job list
Estimated for Edmonton N9
£110 – £320
Slot needed: One to two hours
- Door easing, hinges and closers
- £55 – £140
- Child and rental safety fixings
- £60 – £160
- One-visit saving
- −£25
- Lath, dot-and-dab or concrete fixings
- from £20
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. You have told us the walls are lath, dot-and-dab or concrete, so we have allowed for the correct anchors and the extra scanning time that goes with them.
How it works
How a Edmonton visit works
- Photos and a listPhotos of each wall and a list of jobs get one fixed written price for Edmonton N9 the same working day.
- Scan first, drill secondStud, pipe and cable detector out first, dust sheets down, then the anchor that suits precast concrete and blockwork.
- Load-tested, then clearedFixings are tested, holes made good, waste leaves in the van, and you sign the list off on site.
- Get my price
Walls and fixings
What is behind the plaster in Edmonton
Most likely here
Precast concrete and blockwork — Post-war estates and podium blocks
SDS drill, 8 mm hole, sleeve anchor or screwbolt. Realistic load: 50 kg-plus per fixing. What goes wrong: hitting reinforcement or a buried conduit without a scan first.
Lath and plaster
Pre-1930 terraces and mansion blocks
- Fixing
- Locate the timber lath studs, fix through into the stud with 5 × 80 mm screws
- Safe load
- Up to 25 kg into a stud, nothing into the plaster itself
- What pulls out
- A plasterboard plug in lime plaster crumbles the key and drops the whole panel
Solid London stock brick
Victorian and Edwardian party and external walls
- Fixing
- 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor
- Safe load
- 40 kg-plus per fixing when anchored into brick, not mortar
- What pulls out
- Fixing into soft lime mortar joints, which spin out under load
Dot-and-dab plasterboard
1990s onward new builds and conversions
- Fixing
- Long fixings through the void into the blockwork behind, or a spread-load anchor
- Safe load
- 30 kg with a through-fixing, 8 kg on a hollow-wall anchor alone
- What pulls out
- Short screws that only grip the board, then lever it off the dabs
Timber or metal stud partition
Flat conversions and 1960s-onward internal walls
- Fixing
- Stud detector, then fix into the upright; noggins added where the stud misses
- Safe load
- 35 kg into timber, 15 kg into metal stud with a toggle
- What pulls out
- Two of four bracket holes on the stud and two in fresh air
Precast concrete and blockwork
Post-war estates and podium blocks
- Fixing
- SDS drill, 8 mm hole, sleeve anchor or screwbolt
- Safe load
- 50 kg-plus per fixing
- What pulls out
- Hitting reinforcement or a buried conduit without a scan first
Insulated dry lining
Retrofitted period homes and low-energy refurbishments
- Fixing
- Insulation-rated frame fixings that reach the masonry beyond the board and foam
- Safe load
- 25 kg, spread across four points
- What pulls out
- Compressing the insulation so the fixing slowly works loose
Why Hello Services
Why Hello Services in Edmonton
One visit, one fixed price
Your whole N9 list quoted in writing the same working day, with no doorstep re-quote for Edmonton (N9) addresses.
The right anchor for the wall
We carry the lot, because drilling blind into a panel with reinforcement or a buried cable behind it is what a rushed job leaves behind on N9 jobs, with 32% social-rented stock nearby.
Permits and parking included
London Borough of Enfield visitor permits and suspensions are arranged and paid for by us on the Edmonton rounds.
Fixings and filler included
Screws, plugs, resin, silicone and filler come from the van, not from your invoice on the Edmonton rounds.
Fixed prices
Handyman prices in Edmonton
| Job | From | To | Time on site | What it covers |
|---|---|---|---|---|
| Door easing, hinges and closers | £55 | £140 | 1–2 hrs | Sticking doors planed and rehung, hinges packed, closers and stops fitted |
| Shelves and floating units | £65 | £180 | 1–3 hrs | Alcove shelving, floating shelves and brackets set to a laser line |
| Locks, handles and door furniture | £70 | £160 | 1–2 hrs | Euro cylinders, mortice locks, thumb turns and handles swapped like for like |
| Taps, washers and waste traps | £65 | £150 | 1–2 hrs | Dripping taps, isolation valves, sink and basin traps and flexible tails |
| Radiator bleeding and TRV swaps | £60 | £140 | 1–2 hrs | System bled through, thermostatic valve heads replaced, pressure topped up |
| Filling and patching | £70 | £180 | 1–3 hrs | Old fixing holes filled and sanded ready for a check-out inspection |
Door easing, hinges and closers
£55 – £140
1–2 hrs
Sticking doors planed and rehung, hinges packed, closers and stops fitted
Shelves and floating units
£65 – £180
1–3 hrs
Alcove shelving, floating shelves and brackets set to a laser line
Locks, handles and door furniture
£70 – £160
1–2 hrs
Euro cylinders, mortice locks, thumb turns and handles swapped like for like
Taps, washers and waste traps
£65 – £150
1–2 hrs
Dripping taps, isolation valves, sink and basin traps and flexible tails
Radiator bleeding and TRV swaps
£60 – £140
1–2 hrs
System bled through, thermostatic valve heads replaced, pressure topped up
Filling and patching
£70 – £180
1–3 hrs
Old fixing holes filled and sanded ready for a check-out inspection
These are the 6 jobs we are booked for most often in Edmonton N9 — 53% of homes here are houses, and the list follows the stock. The full 14-job price list is on the reference page.
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. Full price list, fixings matrix and scope policy.
Rates and local costs
Hourly, half day or full day in Edmonton
Hourly rate
£55
per hour, one-hour minimum
Best for one or two small jobs — a shelf, a leaking tap washer, a sticking door.
Half day
£190
up to 4 hours
The most-booked slot in London: three to six jobs from one list, one visit, one price.
Full day
£340
up to 8 hours
A snag list, a whole-flat furniture build, or a move-in day of fixings and fittings.
Same-day call-out
£95
first hour, then hourly
Lock, leak, door or safety job that cannot wait for a booked slot.
- Parking and permits
- London Borough of Enfield visitor permits and bay suspensions are arranged, paid for by us and already inside the quoted figure.
- Charging zones
- Enfield sits outside the Congestion Charge zone and inside ULEZ. Our vans are compliant, so ULEZ never appear on your invoice.
- Access and building rules
- Concierge sign-in, goods-lift booking and out-of-hours windows are handled before the visit, so the clock starts when the work does, not in reception.
Screws, plugs, resin anchors, hollow-wall fixings, silicone and filler come out of the van and are inside the price. Anything bought for you — a replacement tap, a door closer, a specific bracket — is charged at cost with the receipt attached to your invoice.
Scope
What is included in Edmonton
Included in every visit
- A DBS-checked, insured fitter arriving in Edmonton N9 with their own tools, ladders and dust sheets.
- Van-stock anchors chosen for precast concrete and blockwork, including SDS drill, 8 mm hole, sleeve anchor or screwbolt, at no extra charge.
- A stud, pipe and cable scan before drilling, every fixing set to a level and load-tested in front of you.
- Parking, permits and any charge zone sorted with London Borough of Enfield by us, not added to your bill on the day.
Not included — and why
- Gas work of any kind: that is Gas Safe registered work, and we say so before you book, not on the day.
- Part P notifiable electrics — new circuits and boards — go to a registered electrician, not a handyman.
- Anything structural in Edmonton N9: that route starts with London Borough of Enfield building control, and we will point you there.
- Any fixing that would disturb possible asbestos, which is surveyed first as a matter of policy.
The full scope policy, the complete fixings matrix and every fixed price sit on one page: handyman reference.
Coverage
Handyman work around Edmonton
Nearby areas we also cover
Guides
Read before you book
Hiring a handyman in the UK: the complete guide
Scope, legal limits, 2026 prices, vetting questions, wall fixings and a job-list method that gets more done in one visit.
18 min read
Handyman prices in London: what jobs actually cost in 2026
Hourly, half-day and fixed job prices, with the London extras that quietly add to a quote.
9 min read
What a handyman can and cannot legally do in the UK
The real line between handyman work and jobs that need a registered electrician, gas or structural trade.
7 min read
Wall fixings guide: which anchor holds in which London wall
The fixing that actually holds in each London wall type, and the realistic load it will take.
8 min read
Related services
Other work we do in Edmonton
End of tenancy cleaning
Fixing holes filled and touched in, then the whole Edmonton flat cleaned for check-out.
One-off deep cleaning
A N9 reset after the drilling, sanding and flat-pack dust has settled.
After builders cleaning
Snag list finished by us, then the builders' dust taken out of the Edmonton flat.
Moving services
Furniture dismantled in N9, moved, then rebuilt and re-anchored the same day.
House removals
A full Edmonton move where the beds and wardrobes come apart and go back together properly.
House clearance
Old furniture and broken fittings taken away from N9 before the new ones go up.
About the area
Edmonton in context
Market, shopping centre and dense post-war housing on the Lea valley flat. Post-war tower blocks and maisonettes, Victorian terraces and new-build infill, which is why N9 work is dominated by precast concrete panels and dense blockwork. Edmonton Green Market is the landmark most customers navigate by.
Edmonton reads as market, shopping centre and dense post-war housing on the Lea valley flat, and the walls follow the stock. Post-war tower blocks and maisonettes, Victorian terraces and new-build infill. That puts precast concrete and blockwork behind most fixings we make in N9. The anchor that suits it is sDS drill, 8 mm hole, sleeve anchor or screwbolt — realistically holding 50 kg-plus per fixing once it is load-tested.
33% of Edmonton households own their home and 27% are single-person, which is why so many N9 bookings are one long list saved up for a single half-day visit at £190. Getting to you is part of the price: tower blocks with a single goods lift, estate service roads and market congestion London Borough of Enfield permits and suspensions are arranged and paid for by us, and enfield sits outside the Congestion Charge zone and inside ULEZ.
- 47% flats, 53% houses across 17,818 Edmonton households (ONS Census 2021)
- Default fixing for Edmonton: sDS drill, 8 mm hole, sleeve anchor or screwbolt, load-tested to 50 kg-plus per fixing
- Van access and parking: tower blocks with a single goods lift, estate service roads and market congestion
- N9, N18 covered, Edmonton Green Market to the borough boundary, £190 a half day
Where Edmonton sits in our coverage
Edmonton is one of the neighbourhoods on our handyman work in Enfield page, which sits under handyman work across London. The same crew works the adjoining postcodes too — handyman work in Bush Hill Park EN1 (1.8 miles), handyman work in Palmers Green N13 (2.1 miles), handyman work in Tottenham N17 (2.2 miles), handyman work in Enfield Lock and Ponders End EN3 (2.4 miles) and handyman work in Enfield Town EN2 (2.7 miles). If your address sits on the boundary, book the closest page — the price and the crew are the same. For every trade we run at this postcode, see all services in Edmonton.
Most booked alongside this in Edmonton
Edmonton N9 at a glance
- Area
- Edmonton, Enfield
- Postcodes served
- N9, N18
- Nearest station
- Edmonton Green (Greater Anglia)
- Dominant wall construction
- precast concrete panels and dense blockwork, often with surface conduit
- Fixing we use most
- SDS drill, 8 mm hole, sleeve anchor or screwbolt
- Realistic load
- 50 kg-plus per fixing
- Most-booked list
- safety fixings, door furniture and shelving drilled into concrete with an SDS
- Watch out for
- drilling blind into a panel with reinforcement or a buried cable behind it
- Charging zones
- Enfield sits outside the Congestion Charge zone and inside ULEZ
- Residents (Edmonton)
- 50,288
- Households (Edmonton)
- 17,818
- Typical visit
- Half a day in N9
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhoods Edmonton Green, Lower Edmonton North, Lower Edmonton South, Upper Edmonton East & Meridian Water, Upper Edmonton West (E02000299, E02000301, E02000306, E02000309, E02006793) — the published geography that covers Edmonton, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL).
Questions
Edmonton N9 handyman questions
£55 an hour with a one-hour minimum, £190 for a half day and £340 for a full day in N9 across N9, with 47% of homes here being flats. Fixed-price jobs start at £55 — flat-pack from £55, TV mounting from £85, shelving from £65 on the streets near Edmonton Green Market, with Edmonton Green Market a few streets away. Send the list and we confirm one written figure on N9 jobs.
Yes. Locally that usually means precast concrete and blockwork — sds drill, 8 mm hole, sleeve anchor or screwbolt, holding around 50 kg-plus per fixing on this side of Enfield, with 53% of Edmonton homes being houses. The risk we guard against here is drilling blind into a panel with reinforcement or a buried cable behind it in this 47% flats neighbourhood, with Edmonton Green Market a few streets away. Every wall is scanned for studs, pipes and cables before the first hole around Edmonton Green (Greater Anglia).
Batching is the whole point of a N9 half-day slot on the streets near Edmonton Green Market. Three or more jobs in one half-day slot means one set-up, one parking arrangement and one price of £190 rather than three separate call-outs for Edmonton (N9) addresses, with 34% of N9 homes being privately rented. Send photos of each wall with the list and the estimator on this page shows the one-visit saving before you book on this side of Enfield, with 32% social-rented stock nearby.
Like-for-like socket faces, switches and light fittings, yes, tested on completion across N9. We stop at Part P: no new circuits, no consumer units, no bathroom electrics on this side of Enfield. Gas is Gas Safe work full stop, with Edmonton Green Market a few streets away, so we decline it and point you at an engineer who is registered for it for Edmonton (N9) addresses.
Tower blocks with a single goods lift, estate service roads and market congestion around Edmonton Green (Greater Anglia). London Borough of Enfield visitor permits and bay suspensions are arranged and paid for by us and sit inside the quoted price on N9 jobs, with 17,818 households on this patch. Concierge sign-in and goods-lift booking are done before the visit on this side of Enfield, with a median age of 34 in this neighbourhood, so the clock starts when the work does.
Standard screws, plugs, resin and hollow-wall anchors, silicone and filler come out of the van and are already in the price across N9, with 53% of Edmonton homes being houses. Loading for precast concrete and blockwork in advance is why a N9 visit rarely needs a mid-job supply run on this side of Enfield, with Enfield parking rules in play. Specified items — a particular handle, a named tap — are bought at cost and the receipt goes on your invoice in this 47% flats neighbourhood, with 47% of homes here being flats.
Yes. Every area in Enfield has its own page on N9 jobs, and we cross borough boundaries constantly. If your address sits on the edge of N9, book the nearest page and we will confirm the same fixed price on this side of Enfield, with 27% one-person households here.
Source: ONS Census 2021, borough totals via Nomis (table TS008, TS041, TS007A, TS044, TS054, TS003). Figures describe the whole borough, the smallest area ONS publishes every one of these tables for.
Book a handyman in Edmonton N9
Send your job list and a photo of each wall for a fixed written price the same working day. Fixings, permits and taking the packaging away are already in the figure.
Handyman Services reviews from Greater London customers
4.5 ★ from 3,131 Trustpilot reviewsSulltan is the best handyman in London. He is very reliable and professional. I highly recommend.
Quick assembly of a big gas bbq . Friendly service too
Sulltan is the best handyman in London , Highly recommend ......
Read all 3 Handyman Services reviews from Greater London customers →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.