Bromley · BR1 · Handyman
Handyman in Bickley, BR1
Flat-pack assembly and TV mounting in Bickley, BR1: the Bromley housing here means timber stud partitions inside, cavity brickwork outside. We price the whole list, not the clock, and put the right anchor in the right wall.
- Trustpilot 4.5· 3,100+ reviews
- Google 3.9· 1,429 reviews
- £1m public liability
- Licensed waste carrier CBDU300454
- Since 2019
- £55 an hour, £190 a half day — fixed price for the whole list
- Timber or metal stud partition here, so the fixings are chosen for the wall, not pulled from a pack
- Stud, pipe and cable scan before the first hole, every visit
- London Borough of Bromley permits, ULEZ and packaging removal already inside the price
The service, locally
Handyman work in Bickley
- Per hour, one-hour minimum
- £55Per hour, one-hour minimum
- Bickley homes are flats
- 25%Bickley homes are flats
- Fixed-price jobs
- 14Fixed-price jobs
- Households in Bickley
- 6,738Households in Bickley
Instant estimate
Price your Bickley job list
Estimated for Bickley BR1
£85 – £305
Slot needed: One to two hours
- Flat-pack assembly
- £55 – £190
- Door easing, hinges and closers
- £55 – £140
- One-visit saving
- −£25
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. Batch the list into one visit and you pay for one set-up rather than three. Fixings, plugs and filler are already inside these figures.
How it works
How a Bickley visit works
- Photos and a listSend every job in one message and we return a single written figure for the Bickley BR1 visit, same working day.
- Scan first, drill secondNothing is drilled blind: we scan, mark, protect the floor and choose for timber or metal stud partition.
- Load-tested, then clearedEvery fixing load-tested, packaging taken away, and a walk-round with you before we leave.
- Get my price
Walls and fixings
What is behind the plaster in Bickley
Most likely here
Timber or metal stud partition — Flat conversions and 1960s-onward internal walls
Stud detector, then fix into the upright; noggins added where the stud misses. Realistic load: 35 kg into timber, 15 kg into metal stud with a toggle. What goes wrong: two of four bracket holes on the stud and two in fresh air.
Lath and plaster
Pre-1930 terraces and mansion blocks
- Fixing
- Locate the timber lath studs, fix through into the stud with 5 × 80 mm screws
- Safe load
- Up to 25 kg into a stud, nothing into the plaster itself
- What pulls out
- A plasterboard plug in lime plaster crumbles the key and drops the whole panel
Solid London stock brick
Victorian and Edwardian party and external walls
- Fixing
- 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor
- Safe load
- 40 kg-plus per fixing when anchored into brick, not mortar
- What pulls out
- Fixing into soft lime mortar joints, which spin out under load
Dot-and-dab plasterboard
1990s onward new builds and conversions
- Fixing
- Long fixings through the void into the blockwork behind, or a spread-load anchor
- Safe load
- 30 kg with a through-fixing, 8 kg on a hollow-wall anchor alone
- What pulls out
- Short screws that only grip the board, then lever it off the dabs
Timber or metal stud partition
Flat conversions and 1960s-onward internal walls
- Fixing
- Stud detector, then fix into the upright; noggins added where the stud misses
- Safe load
- 35 kg into timber, 15 kg into metal stud with a toggle
- What pulls out
- Two of four bracket holes on the stud and two in fresh air
Precast concrete and blockwork
Post-war estates and podium blocks
- Fixing
- SDS drill, 8 mm hole, sleeve anchor or screwbolt
- Safe load
- 50 kg-plus per fixing
- What pulls out
- Hitting reinforcement or a buried conduit without a scan first
Insulated dry lining
Retrofitted period homes and low-energy refurbishments
- Fixing
- Insulation-rated frame fixings that reach the masonry beyond the board and foam
- Safe load
- 25 kg, spread across four points
- What pulls out
- Compressing the insulation so the fixing slowly works loose
Fixed prices
Handyman prices in Bickley
| Job | From | To | Time on site | What it covers |
|---|---|---|---|---|
| Radiator bleeding and TRV swaps | £60 | £140 | 1–2 hrs | System bled through, thermostatic valve heads replaced, pressure topped up |
| Shelves and floating units | £65 | £180 | 1–3 hrs | Alcove shelving, floating shelves and brackets set to a laser line |
| Door easing, hinges and closers | £55 | £140 | 1–2 hrs | Sticking doors planed and rehung, hinges packed, closers and stops fitted |
| Locks, handles and door furniture | £70 | £160 | 1–2 hrs | Euro cylinders, mortice locks, thumb turns and handles swapped like for like |
| Taps, washers and waste traps | £65 | £150 | 1–2 hrs | Dripping taps, isolation valves, sink and basin traps and flexible tails |
| Flat-pack assembly | £55 | £190 | 1–4 hrs | Wardrobes, beds, desks and drawer units built, levelled and anchored to the wall |
Radiator bleeding and TRV swaps
£60 – £140
1–2 hrs
System bled through, thermostatic valve heads replaced, pressure topped up
Shelves and floating units
£65 – £180
1–3 hrs
Alcove shelving, floating shelves and brackets set to a laser line
Door easing, hinges and closers
£55 – £140
1–2 hrs
Sticking doors planed and rehung, hinges packed, closers and stops fitted
Locks, handles and door furniture
£70 – £160
1–2 hrs
Euro cylinders, mortice locks, thumb turns and handles swapped like for like
Taps, washers and waste traps
£65 – £150
1–2 hrs
Dripping taps, isolation valves, sink and basin traps and flexible tails
Flat-pack assembly
£55 – £190
1–4 hrs
Wardrobes, beds, desks and drawer units built, levelled and anchored to the wall
These are the 6 jobs we are booked for most often in Bickley BR1 — 75% of homes here are houses, and the list follows the stock. The full 14-job price list is on the reference page.
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. Full price list, fixings matrix and scope policy.
Why Hello Services
Why Hello Services in Bickley
We scan before we drill
Stud, pipe and cable detector on every Bickley wall before the first hole — not after the leak on the Bickley rounds, with this being a short walk from Bickley (Southeastern).
One visit, one fixed price
Your whole BR1 list quoted in writing the same working day, with no doorstep re-quote on Bromley bookings.
The right anchor for the wall
We carry the lot, because a four-hole bracket with two screws in a stud and two in fresh air is what a rushed job leaves behind in this 25% flats neighbourhood — and 6,738 households on this patch, with 75% of Bickley homes being houses.
Permits and parking included
London Borough of Bromley visitor permits and suspensions are arranged and paid for by us on the Bickley rounds.
Rates and local costs
Hourly, half day or full day in Bickley
Hourly rate
£55
per hour, one-hour minimum
Best for one or two small jobs — a shelf, a leaking tap washer, a sticking door.
Half day
£190
up to 4 hours
The most-booked slot in London: three to six jobs from one list, one visit, one price.
Full day
£340
up to 8 hours
A snag list, a whole-flat furniture build, or a move-in day of fixings and fittings.
Same-day call-out
£95
first hour, then hourly
Lock, leak, door or safety job that cannot wait for a booked slot.
- Parking and permits
- London Borough of Bromley visitor permits and bay suspensions are arranged, paid for by us and already inside the quoted figure.
- Charging zones
- Bromley sits outside the Congestion Charge zone and inside ULEZ. Our vans are compliant, so ULEZ never appear on your invoice.
- Access and building rules
- Concierge sign-in, goods-lift booking and out-of-hours windows are handled before the visit, so the clock starts when the work does, not in reception.
Screws, plugs, resin anchors, hollow-wall fixings, silicone and filler come out of the van and are inside the price. Anything bought for you — a replacement tap, a door closer, a specific bracket — is charged at cost with the receipt attached to your invoice.
Scope
What is included in Bickley
Included in every visit
- An insured, DBS-checked tradesperson who brings everything needed for a BR1 visit — tools, steps and floor protection.
- Fixings matched to timber or metal stud partition — Stud detector, then fix into the upright; noggins added where the stud misses included — rather than whatever came in the flat-pack box.
- Scanning, levelling and load-testing on every hole — plus packaging and old fittings taken away.
- Access worked out in advance for Bickley BR1, with London Borough of Bromley permits and charges already inside the price.
Not included — and why
- Gas work of any kind: that is Gas Safe registered work, and we say so before you book, not on the day.
- New circuits or consumer units, which are notifiable under Part P and need a registered electrician.
- Anything structural in Bickley BR1: that route starts with London Borough of Bromley building control, and we will point you there.
- Any fixing that would disturb possible asbestos, which is surveyed first as a matter of policy.
The full scope policy, the complete fixings matrix and every fixed price sit on one page: handyman reference.
Coverage
Handyman work around Bickley
Nearby areas we also cover
Guides
Read before you book
Hiring a handyman in the UK: the complete guide
Scope, legal limits, 2026 prices, vetting questions, wall fixings and a job-list method that gets more done in one visit.
18 min read
Handyman prices in London: what jobs actually cost in 2026
Hourly, half-day and fixed job prices, with the London extras that quietly add to a quote.
9 min read
What a handyman can and cannot legally do in the UK
The real line between handyman work and jobs that need a registered electrician, gas or structural trade.
7 min read
Wall fixings guide: which anchor holds in which London wall
The fixing that actually holds in each London wall type, and the realistic load it will take.
8 min read
Related services
Other work we do in Bickley
End of tenancy cleaning
Fixing holes filled and touched in, then the whole Bickley flat cleaned for check-out.
One-off deep cleaning
A BR1 reset after the drilling, sanding and flat-pack dust has settled.
After builders cleaning
Snag list finished by us, then the builders' dust taken out of the Bickley flat.
Moving services
Furniture dismantled in BR1, moved, then rebuilt and re-anchored the same day.
House removals
A full Bickley move where the beds and wardrobes come apart and go back together properly.
House clearance
Old furniture and broken fittings taken away from BR1 before the new ones go up.
About the area
Bickley in context
Most of Bickley reads the same way from the pavement: large detached houses and villas, many converted into flats, with long drives. timber stud partitions inside is what we meet most in BR1, and Bickley Park is the fixed point crews route by.
Census 2021 counts 16,426 residents in Bickley, 25% of them in flats. Large detached houses and villas, many converted into flats, with long drives. Practically, that means timber or metal stud partition and a fixing chosen for it. On that wall we use stud detector, then fix into the upright, and we will tell you the honest ceiling: 35 kg into timber, 15 kg into metal stud with a toggle.
Because 18% of homes here are rented privately, we are often working to an agent's deadline — photographs of every fixing and an itemised invoice come as standard. Access is planned before the van leaves. Long gravel drives, mature trees limiting height and wide easy roads. Where London Borough of Bromley needs a visitor permit or a bay suspension we book it, and bromley sits outside the Congestion Charge zone and inside ULEZ.
- Housing mix here: 25% flats to 75% houses, 16,426 residents in total
- Timber or metal stud partition dominates Bickley, so the van carries the anchors that suit it, not a generic pack
- Access: long gravel drives, mature trees limiting height and wide easy roads
- BR1 covered, Bickley Park to the borough boundary, £190 a half day
Where Bickley sits in our coverage
Bickley is one of the neighbourhoods on our handyman work in Bromley page, which sits under handyman work across London. Nearest pages to this one, in travel order: handyman work in Bromley BR1 (under ½ mile), handyman work in Shortlands and Hayes BR2 (1.7 miles), handyman work in Chislehurst BR7 (1.9 miles), handyman work in Petts Wood BR5 (3.8 miles) and handyman work in Orpington BR6 (4.4 miles). If your address sits on the boundary, book the closest page — the price and the crew are the same. For every trade we run at this postcode, see all services in Bickley.
Most booked alongside this in Bickley
Bickley BR1 at a glance
- Area
- Bickley, Bromley
- Postcodes served
- BR1
- Nearest station
- Bickley (Southeastern)
- Dominant wall construction
- timber stud partitions inside, cavity brickwork outside
- Fixing we use most
- Stud detector, then fix into the upright; noggins added where the stud misses
- Realistic load
- 35 kg into timber, 15 kg into metal stud with a toggle
- Most-booked list
- a half-day job list — doors eased, blinds up, shelves fitted, taps re-washered
- Watch out for
- a four-hole bracket with two screws in a stud and two in fresh air
- Charging zones
- Bromley sits outside the Congestion Charge zone and inside ULEZ
- Residents (Bickley)
- 16,426
- Households (Bickley)
- 6,738
- Typical visit
- Half a day in BR1
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhoods Bickley East, Bickley West (E02000146, E02000148) — the published geography that covers Bickley, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL).
Questions
Bickley BR1 handyman questions
£55 an hour with a one-hour minimum, £190 for a half day and £340 for a full day in BR1 on this side of Bromley, with this being London Borough of Bromley territory. Fixed-price jobs start at £55 — flat-pack from £55, TV mounting from £85, shelving from £65 in this 25% flats neighbourhood, with a median age of 41 in this neighbourhood. Send the list and we confirm one written figure around Bickley (Southeastern).
Yes. Locally that usually means timber or metal stud partition — stud detector around Bickley (Southeastern) — and 25% of homes here being flats, with 75% of Bickley homes being houses, then fix into the upright; noggins added where the stud misses, holding around 35 kg into timber, 15 kg into metal stud with a toggle. The risk we guard against here is a four-hole bracket with two screws in a stud and two in fresh air on the streets near Bickley Park, with this being London Borough of Bromley territory. Every wall is scanned for studs, pipes and cables before the first hole for Bickley (BR1) addresses.
Please do: one visit to Bickley beats three. Once you are past three jobs, £190 for a half day beats paying the £55 hourly minimum three times over on the streets near Bickley Park, with 74% owner-occupation locally. The estimator above prices the batch, with 8% social-rented stock nearby, so you see the Bickley figure before committing to anything across BR1.
Swapping an existing socket face, switch or light fitting in Bickley is fine, with Bromley parking rules in play, and it is tested before we leave. We stop at Part P: no new circuits, no consumer units, no bathroom electrics around Bickley (Southeastern). Gas work of any kind is Gas Safe registered work and we will not touch it — we will tell you who should on BR1 jobs, with 6,738 households on this patch.
Long gravel drives, mature trees limiting height and wide easy roads in Bickley. London Borough of Bromley visitor permits and bay suspensions are arranged and paid for by us and sit inside the quoted price for Bickley (BR1) addresses, with 75% of Bickley homes being houses. Concierge sign-in and goods-lift booking are done before the visit in this 25% flats neighbourhood, with this being a short walk from Bickley (Southeastern), so the clock starts when the work does.
Everyday fixings and filler are ours to supply: they are priced into the job before we arrive in Bickley, with 75% of Bickley homes being houses. Because timber or metal stud partition is what we expect here, the right anchors for it are on board before the van sets off around Bickley (Southeastern), with 8% social-rented stock nearby. Specified items — a particular handle, a named tap — are bought at cost and the receipt goes on your invoice in this 25% flats neighbourhood, with 18% of BR1 homes being privately rented.
Yes. Every area in Bromley has its own page on the streets near Bickley Park, and we cross borough boundaries constantly. If your address sits on the edge of BR1, book the nearest page and we will confirm the same fixed price on Bromley bookings, with 74% owner-occupation locally.
Source: ONS Census 2021, borough totals via Nomis (table TS008, TS041, TS007A, TS044, TS054, TS003). Figures describe the whole borough, the smallest area ONS publishes every one of these tables for.
Book a handyman in Bickley BR1
Send your job list and a photo of each wall for a fixed written price the same working day. Fixings, permits and taking the packaging away are already in the figure.
Handyman Services reviews from Greater London customers
4.5 ★ from 3,131 Trustpilot reviewsSulltan is the best handyman in London. He is very reliable and professional. I highly recommend.
Quick assembly of a big gas bbq . Friendly service too
Sulltan is the best handyman in London , Highly recommend ......
Read all 3 Handyman Services reviews from Greater London customers →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.