South London · Bed assembly
Bed assembly in Bexley
**Bed fitting in Bexley** runs to 7 areas. With 25% of homes in flats and 34% of households raising children, most bookings are doubles, ottomans and bunks — and all of them are built in the room rather than in the hall. Straightforward van access and off-street parking; only Bexleyheath Broadway needs timed loading.
- 7 areas covered, each with its own page
- From £45 a bed, £55 an hour for second-hand frames
- Bunks and cots checked against BS EN 747 and BS EN 716
- London Borough of Bexley permits arranged and paid for by us
The service, locally
Bed assembly across Bexley
Prices are **per bed and identical in every Bexley postcode**. What changes locally is access: the permit, the lift booking and the stair carry, all arranged and paid for by us before the slot.
Bunks, mid sleepers, high sleepers and cots are checked against **BS EN 747** and **BS EN 716** before the mattress goes on, and every visit ends with the packaging in our van.
- Areas covered
- 7Areas covered
- Homes that are flats
- 25%Homes that are flats
- From, per bed
- £45From, per bed
- Hourly, second-hand frames
- £55Hourly, second-hand frames
Instant estimate
Price your Bexley bed build
Prices include VAT, the van, the tools and taking the flattened packaging away. Nothing is added on the day without your written agreement first. Hello Services is an independent assembly company. We are not affiliated with, endorsed by or connected to IKEA, Dreams, Bensons, Emma, Simba or any other bed retailer. Brand and range names are used only to describe the beds we build.
How it works
How a Bexley bed assembly visit works
- Send the bed, get a fixed pricePhotograph the delivery stack and the bedroom it is going in. We size the slot for Belvedere, confirm the access route and put the whole figure in writing the same working day.
- Access and slot sorted for DA17Access is settled before the day: a communal winder stair with a half-landing turn, measured against the headboard before the van loads, with the London Borough of Bexley permit arranged and paid for by us.
- Built, checked, packaging goneDust sheets down, the frame built in the room, the frame packed level on an uneven period floor so it does not rock, and the headboard set plumb past the skirting, then the cardboard flattened and taken away.
- Get my price
Bedrooms and safety
What we are usually building in Bexley
Most likely here
Victorian and Edwardian conversions and mansion flats with tall rooms and awkward stairs
- Most-booked bed
- king frames and upholstered headboards carried up in parts and built in the room
- Room constraint
- a period bedroom with a chimney breast, so the frame is squared to the room rather than to one wall
- Getting it in
- a communal winder stair with a half-landing turn, measured against the headboard before the van loads
- The check that closes the visit
- the frame packed level on an uneven period floor so it does not rock, and the headboard set plumb past the skirting
The stock here is Victorian and Edwardian conversions and mansion flats with tall rooms and awkward stairs, and the constraint we plan around is a period bedroom with a chimney breast, so the frame is squared to the room rather than to one wall.
28% of Belvedere households are one-person, which is why single frames and headboard fittings outnumber whole-house bunk days here.
Belvedere (Southeastern) is the nearest station and London Borough of Bexley controls the kerb outside, so the permit is bought before the van leaves rather than argued about on the pavement.
We carry bolts, cams, barrel nuts, lock washers and common slat holders, so most short-shipped packs still finish the same visit. Missing or damaged manufacturer parts are photographed on the spot with the model and part number, so your replacement is ordered the same day rather than after a wasted evening.
Hello Services is an independent assembly company. We are not affiliated with, endorsed by or connected to IKEA, Dreams, Bensons, Emma, Simba or any other bed retailer. Brand and range names are used only to describe the beds we build.
Why Hello Services
Why book bed assembly in Bexley with us
Built silent, not just built
Every Belvedere frame is torqued in sequence, the centre rail seated on its legs, then rocked deliberately before we leave.
Priced per bed, not per hour
Your DA17 bed is quoted per unit in writing the same working day, with no doorstep re-quote when the box turns out heavy.
Safety standards, checked
Bunks and sleepers against BS EN 747, cots against BS EN 716 — guard-rail heights, gaps and ladder fixings measured, not eyeballed.
Same-day around your mattress
Tell us the delivery window and we hold a Belvedere slot behind it, so nobody sleeps on the floor.
Per-bed prices
Bed assembly prices in Bexley
| Bed | From | To | Build time | What it covers |
|---|---|---|---|---|
| King or super-king bed frame | £65 | £105 | 1 hr 20 mins | Two centre legs levelled to the floor you have, side rails squared before the slats drop in |
| Upholstered bed frame | £75 | £125 | 1 hr 30 mins | Fabric panels handled clean, bolt covers refitted, headboard bolted plumb to the base |
| Headboard fitting only | £35 | £55 | 30 mins | Bolted or wall-fixed level, packers used where the skirting throws the board off plumb |
| Single or double bed frame (wood or metal) | £45 | £75 | 55 mins | Centre support rail seated, every bolt torqued, slats and slat holders set so nothing creaks |
| Ottoman bed, single gas strut | £85 | £130 | 1 hr 40 mins | Struts fitted last and balanced so the lid holds mid-lift instead of sinking on the mattress |
| Day bed or trundle | £65 | £110 | 1 hr 15 mins | Trundle rollers set to clear the skirting, back and side rails squared so the frame sits flat |
| Old bed disassembly (per bed) | £40 | £65 | 40 mins | Taken apart, fixings bagged, parts stacked flat — removal quoted through our clearance division |
| Ottoman bed, double gas strut or side-lift | £110 | £170 | 2 hrs 10 mins | Strut rating matched to the mattress weight, base tested loaded before we leave the room |
King or super-king bed frame
£65 – £105
1 hr 20 mins
Two centre legs levelled to the floor you have, side rails squared before the slats drop in
Upholstered bed frame
£75 – £125
1 hr 30 mins
Fabric panels handled clean, bolt covers refitted, headboard bolted plumb to the base
Headboard fitting only
£35 – £55
30 mins
Bolted or wall-fixed level, packers used where the skirting throws the board off plumb
Single or double bed frame (wood or metal)
£45 – £75
55 mins
Centre support rail seated, every bolt torqued, slats and slat holders set so nothing creaks
Ottoman bed, single gas strut
£85 – £130
1 hr 40 mins
Struts fitted last and balanced so the lid holds mid-lift instead of sinking on the mattress
Day bed or trundle
£65 – £110
1 hr 15 mins
Trundle rollers set to clear the skirting, back and side rails squared so the frame sits flat
Old bed disassembly (per bed)
£40 – £65
40 mins
Taken apart, fixings bagged, parts stacked flat — removal quoted through our clearance division
Ottoman bed, double gas strut or side-lift
£110 – £170
2 hrs 10 mins
Strut rating matched to the mattress weight, base tested loaded before we leave the room
Shown: the 8 beds we quote most around Bexley. The other rows of the 16-item London list carry the same fixed prices, wherever the postcode.
£45 minimum per visit. Prices include VAT, the van, the tools and taking the flattened packaging away. Nothing is added on the day without your written agreement first. Prices assume the boxes are delivered to the room the bed is being built in. Where a king headboard or a divan base has to come up a winder stair we flag the carry from your photos before booking, never on the day.
Rates and local costs
Fixed per bed, or hourly, in Bexley
One bed, fixed price
£45
from, per bed
A single frame built, levelled, torqued and safety-checked, with the cardboard taken away.
Hourly rate
£55
per hour, one-hour minimum
For mixed lists, second-hand frames and beds that arrived without their instructions.
Bed disassembly
£40
per bed
Taken apart, fixings bagged and labelled, parts stacked ready for the move or collection.
Disassembly and reassembly
£95
per bed, moving day
Stripped at one address and rebuilt at the other, so the first night in the new place is a made bed.
- Parking and permits
- London Borough of Bexley visitor permits and bay suspensions are arranged and paid for by us, so a boxed divan base is carried once. Wide roads with driveways; the riverside industrial roads carry heavy traffic.
- Charging zones
- Bexley sits outside the Congestion Charge zone and inside ULEZ. Our vans are ULEZ compliant and neither charge ever appears on a DA17 invoice.
- Stairs, lifts and the carry
- 48% of homes around Belvedere are flats, so lift bookings and stair carries are agreed from your photos before the slot rather than discovered on the day.
Prices assume the boxes are delivered to the room the bed is being built in. Where a king headboard or a divan base has to come up a winder stair we flag the carry from your photos before booking, never on the day.
Scope
What is included in Bexley
Included in every visit
- Every frame on your Belvedere list built in the room it is staying in, squared and levelled to the floor you have
- Centre support rails and legs seated properly, slats and slat holders set so the frame does not creak
- Every bolt torqued in sequence, then re-checked once the slats and mattress are in place
- Safety checks on bunks, sleepers and cots against BS EN 747 and BS EN 716 — the frame packed level on an uneven period floor so it does not rock, and the headboard set plumb past the skirting
- London Borough of Bexley permits or bay suspensions where DA17 needs one
- Flattened cardboard, polystyrene and strapping taken away in the van
Not included — and why
- Mattress supply and delivery — we build around the mattress you have ordered rather than selling you one
- Wall-fixed headboards into a wall that needs new structure or a stud repair first (we will quote that as handyman work)
- Manufacturer spare parts: missing bolts, cams or damaged panels are photographed and ordered at cost with the receipt
- Removal of an old bed, which is quoted alongside the build and carried out under our waste carrier licence
- Electrical work on an adjustable base beyond plugging it in, which belongs to a registered electrician
Coverage
Bed assembly around Bexley
What customers say about handyman work
3.9 ★ from 1,408 Google reviewsI'm answering on behalf my wife who was & still is in hospital & can't get wifi , Your two gentlemen were absolutely brilliant very impressed with the results I'm hoping my wife will be home soon so she can see the results before I make a mess when I come from the garden. Eric… Read in full →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.
Guides
Read before you book
How long does a bed take to assemble?
Honest build times per bed type, and the four things that make an hour turn into three.
8 min read
Bunk bed and cot safety: the standards explained
Guard rails, gaps, ladders and mattress depth — what the standards actually require.
9 min read
Ottoman and storage beds: the buying and assembly guide
Which storage bed fits your room, which strut rating you need, and what the build involves.
8 min read
Related services
Other work we do in Bexley
Flat-pack assembly in Belvedere
Wardrobes, drawers and shelving built and anchored on the same visit as the bed.
Handyman in Belvedere
Headboard wall fixings, blinds, shelves and the rest of the DA17 bedroom snag list.
Man with a van in Belvedere
Collect the bed from a store or a marketplace seller, then build it the same day.
House removals in Belvedere
Beds dismantled at one address and rebuilt at the other, by the same crew.
End of tenancy cleaning in Belvedere
Book the clean for the day after the beds go in and the flat hands over ready.
Old bed and mattress clearance in Belvedere
Old frames and mattresses taken apart and taken away under our waste carrier licence.
About the borough
Bexley in context
Belvedere sits in Bexley, a short walk from Lesnes Abbey Woods and served by Belvedere (Southeastern). The ONS neighbourhood covering it holds 3,983 households, 48% of them flats — the mix that fills our diary with king frames and upholstered headboards carried up in parts and built in the room.
Bexley at a glance
- Area
- Belvedere, Bexley
- Postcodes served
- DA17
- Nearest station
- Belvedere (Southeastern)
- Bedroom stock
- Victorian and Edwardian conversions and mansion flats with tall rooms and awkward stairs
- Average bedrooms (Bexley)
- 2.79
- Households with children
- 34%
- Most-booked bed
- king frames and upholstered headboards carried up in parts and built in the room
- Room constraint
- a period bedroom with a chimney breast, so the frame is squared to the room rather than to one wall
- Carry profile
- a communal winder stair with a half-landing turn, measured against the headboard before the van loads
- Watch out for
- a king frame assembled downstairs and then found to be wider than the bedroom door, which costs the whole slot
- Charging zones
- Bexley sits outside the Congestion Charge zone and inside ULEZ
- Households (Belvedere)
- 3,983
- Typical visit
- One to three hours in DA17
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhood Belvedere & Lessness Heath (E02000067) — the published geography that covers Belvedere, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL).
Questions
Bexley bed assembly questions
Per bed and identical in every Bexley postcode: from £45 for a single or double frame, £65 for a king, £85 for an ottoman storage bed, £95 for a bunk and £55 for a cot. Hourly is £55 where the frame is second-hand or has no instructions.
All 7 areas, each with its own page covering the local bedroom stock, the bed that area books most and what a boxed base has to get through to reach the room. Straightforward van access and off-street parking; only Bexleyheath Broadway needs timed loading.
Yes, on every build. Bunks, mid sleepers and high sleepers are checked against BS EN 747 — guard-rail height above the mattress, ladder fixings and gap sizes — and cots against BS EN 716. Nothing is signed off until the frame is square and every bolt torqued.
Yes. Void turnarounds, furnished-let packs and student handovers are handled with photographs on completion, an itemised invoice per property and one contact for a portfolio. We can attend with keys from the agent.
Where a visitor permit or bay suspension is needed we arrange and pay for it with London Borough of Bexley, and the cost is already inside your quote. Our vans are ULEZ compliant.
Yes — £5m public liability, DBS-checked fitters, and photographs of every completed bed. If a joint we torqued works loose we come back and put it right.
Source: ONS Census 2021, borough totals via Nomis (table TS008, TS041, TS007A, TS044, TS054, TS003). Figures describe the whole borough, the smallest area ONS publishes every one of these tables for.
Book bed assembly in Bexley
Send the bed model or a photo of the boxes for a fixed written price the same working day. The carry, permits and taking the packaging away are already in the figure.
What customers say about handyman work
3.9 ★ from 1,408 Google reviewsI'm answering on behalf my wife who was & still is in hospital & can't get wifi , Your two gentlemen were absolutely brilliant very impressed with the results I'm hoping my wife will be home soon so she can see the results before I make a mess when I come from the garden. Eric… Read in full →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.