Booked around your day
Most bookings are within a week, sooner for a re-seal call where damp has already started to show. Romford (Elizabeth line) is the nearest station, so a RM1 visit rarely needs a whole morning set aside.
Havering · RM1 · Bath and shower screen fitting
Professional Bath and shower screen fitting in Romford, RM1
Same-week slots · Fully insured · Local Romford fitters · Fixed written pricesBooking bath and shower screen fitting near Romford Market? Ring-road one-way system, market-day closures and booked lifts in the new blocks, and that is planned into the slot rather than discovered on the day. Prices start at £110 and are fixed before we travel. Tile is pilot-drilled to stop the glaze cracking before any fixing goes in.
- Trustpilot 4.5· 3,100+ reviews
- Google 3.9· 1,429 reviews
- £5m public liability
- Licensed waste carrier CBDU300454
- Since 2019
RM1RM7
- Bath and shower screen fitting in Romford RM1 from £110, fixed in writing
- Most booked here: bath and shower screens
- Most bookings are within a week, sooner for a re-seal call where damp has already started to show.
- London Borough of Havering permits, ULEZ itemised, never hidden
- Trustpilot 4.5· 3,100+ reviews
- Google 3.9· 1,429 reviews
- £5m public liability
- Licensed waste carrier CBDU300454
- Since 2019
- From, pivot screen on a bath
- £110From, pivot screen on a bath
- Romford homes are flats
- 32%Romford homes are flats
- Privately rented
- 23%Privately rented
- Households in Romford
- 18,759Households in Romford
Overview
Bath and shower screen fitting in Romford RM1, explained
Bath and shower screen fitting in Romford RM1 is a fixed-price visit for owner-occupier-led homes in Havering, most of them mainly Victorian. 18,759 households sit inside this RM1 patch, 32% of them flats, so we quote on access near Romford Market rather than a London average.
How it works
How bath and shower screen fitting works in Romford
Five steps, the same on every RM1 job, so you know what happens before you commit. Terraced houses with solid London stock brick and later plasterboard linings on these streets — and with 28% one-person households in Romford, one adult is usually the only pair of hands on site is what we plan for here.
Step 1
Measure and level-check
Bath, tray or wet-room floor measured, and how far out of level it is checked before ordering, so packers and shims are ready on the day.
Step 2
Mark and pilot-drill tile
Positions marked, then pilot-drilled slowly into the glaze with a masonry bit rated for porcelain, which is the step that stops tiles cracking.
Step 3
Fix and pack level
Hinges, tracks or channels fixed and packed so the screen itself reads level even when the bath edge does not.
Step 4
Seal
Neutral-cure silicone run to the tile and the bath or tray, tooled to a clean bead and left to cure before use.
Step 5
Test and clear
Door or panel run through its full movement, checked for drips at the seal, and off-cuts and packaging removed.
Why choose us
Why Romford customers book us
Four things decide whether a RM1 job goes well, and none of them are visible from a price list.
Romford walls, not generic walls
We expect solid London stock brick in RM1, some of it dry-lined during a later refurbishment, the pattern behind 18,759 households inside the RM1 neighbourhood in RM1, and we carry the anchors, through-fixings and long bits that match. The mistake we spend most time undoing here is Romford gives us fixings landing in soft lime mortar joints instead of the brick body, and with 23% of homes here privately rented, it sets the booking date as often as the job does.
Insured and documented
Fitters carry £5m public liability cover, and every screen fitted is CE-marked toughened safety glass to BS EN 12150 — the standard that means it crumbles into small granules rather than shards if it ever fails.
Crew sized to the job
One fitter for a pivot or fixed screen; two for sliding and bi-fold enclosures and any wet-room panel over 190cm, which is awkward to hold plumb alone. Ring-road one-way system, market-day closures and booked lifts in the new blocks.
Fixed prices
Bath and shower screen fitting prices in Romford
Fixed prices for RM1 and the rest of Havering. Screen type and how far out of level the bath, tray or floor sits. A packed-and-shimmed pivot screen is quick; a floor-fixed wet-room panel with no frame to hide the gap takes the longest to get plumb.
| Job | From | Typical time | What sets the price |
|---|---|---|---|
| Pivot screen on a bath | £110 | 1–1.5 hrs | The hinge post is packed and shimmed to a bath edge that is rarely dead level, then silicone-sealed to the tile. |
| Fixed bath screen with return panel | £150 | 1.5–2 hrs | Two panels and a bracing bar have to be squared to each other before either is sealed, or the return panel gapes. |
| Sliding shower door on a tray | £190 | 2–3 hrs | The track is fixed to the wall tiles and the tray upstand, both drilled without cracking porcelain, then the rollers are set to run true. |
| Bi-fold shower door, enclosure | £220 | 2.5–3.5 hrs | Two hinged leaves fold flush without fouling the tray lip, which takes more adjustment than a single sliding panel. |
| Wet-room glass panel, floor-fixed | £240 | 3–4 hrs | No frame to hide behind: the channel and the panel both have to be perfectly plumb against a screeded fall. |
| Re-silicone an existing screen or bath edge | £65 | 45–75 min | Old silicone is cut out, the substrate dried and re-sealed — the single most common reason a bathroom starts to smell of damp. |
Pivot screen on a bath
£110 · 1–1.5 hrs
The hinge post is packed and shimmed to a bath edge that is rarely dead level, then silicone-sealed to the tile.
Fixed bath screen with return panel
£150 · 1.5–2 hrs
Two panels and a bracing bar have to be squared to each other before either is sealed, or the return panel gapes.
Sliding shower door on a tray
£190 · 2–3 hrs
The track is fixed to the wall tiles and the tray upstand, both drilled without cracking porcelain, then the rollers are set to run true.
Bi-fold shower door, enclosure
£220 · 2.5–3.5 hrs
Two hinged leaves fold flush without fouling the tray lip, which takes more adjustment than a single sliding panel.
Wet-room glass panel, floor-fixed
£240 · 3–4 hrs
No frame to hide behind: the channel and the panel both have to be perfectly plumb against a screeded fall.
Re-silicone an existing screen or bath edge
£65 · 45–75 min
Old silicone is cut out, the substrate dried and re-sealed — the single most common reason a bathroom starts to smell of damp.
Prices are fitting labour with sealant and standard fixings included; the screen or door itself is supplied by you or ordered at cost. Every screen fitted is CE-marked toughened safety glass to BS EN 12150. Tanking or waterproofing repairs behind existing tiles are quoted separately once uncovered. Permits, ULEZ and the Congestion Charge where they apply are itemised.
Scope
What's included in Romford
The same scope across RM1, whether the job is a single item or a full room.
Included in the price
- Standard on Havering bookings: drilling set for porcelain and ceramic tile with a pilot to stop the bit skating off the glaze, allowing for the 23% of RM1 homes that are privately rented and need the landlord's sign-off
- Screen or door packed and shimmed level even where the bath or tray is not, noted on the Romford job sheet so the next visit starts from it
- In Romford: neutral-cure silicone sealant used against tile and enamel, which will not corrode chrome fittings, timed against the walk in from Romford (Elizabeth line)
- On RM1 jobs: old sealant fully removed and the substrate dried before resealing, agreed on the doorstep in Romford before anything is unpacked
Not included
- Replacing cracked or chipped bath enamel, tile or tray, which is quoted as a separate repair, handled by London Borough of Havering or a specialist contractor instead
- Tanking or waterproof membrane repair behind tiles found to be leaking, which we refer on to the right trade in Romford
- Cutting or reglazing toughened glass on site — a damaged panel is replaced, not cut down, outside the fixed price on Romford bookings
Reviews for Handyman Services across the UK
4.5 ★ from 3,131 Trustpilot reviews★★★★★Trustpilot
Sulltan is the best handyman in London. He is very reliable and professional. I highly recommend.
★★★★★Trustpilot
I have recently had a lot of work done in my small flat which has left it grubby and, following surgery, I haven't been able to clean up myself. I booked a deep clean and a carpet shampoo. The team arrived as scheduled and started work, room by room. They were friendly, efficient and considerate.… Read in full →
★★★★★Google
Sulltan is the best handyman in London , Highly recommend ......
Read all 31 Handyman Services reviews →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.
Coverage
Where we work around Romford RM1
Bath and shower screen fitting across Havering and the RM1 district, mapped below.
Bath and shower screen fitting nearby
- Bath and shower screen fitting in Gidea ParkRM2
- Bath and shower screen fitting in Collier RowRM5
- Bath and shower screen fitting in Harold Wood and Harold HillRM3
- Bath and shower screen fitting in HornchurchRM12
- Bath and shower screen fitting in Elm ParkRM12
- Bath and shower screen fitting in Chadwell HeathRM6
Also in this area
Other handyman work in Romford
Same fitters, same RM1 rounds, same fixed-price approach.
Wardrobe assembly in Romford
Fitted and flat-pack wardrobes scribed to the wall and anchored so doors stay square.
Wood flooring in Romford
Engineered and solid boards fitted floating or glued, with the moisture check done first.
Flat-pack assembly in Romford
Wardrobes, beds, desks and storage built, levelled and anchored to the wall.
Shelf installation in Romford
Floating and bracketed shelving into plaster, brick, stud and dot-and-dab.
Blinds and curtain fitting in Romford
One fitter for standard windows; two for bent bay tracks or full-height stairwell blinds.
Most booked alongside this in Romford RM1
Working in Romford
Romford RM1 at a glance
Published figures for the neighbourhood that covers Romford — the numbers that actually change a bath and shower screen fitting quote.
Romford RM1 is mainly Victorian and owner-occupier-led: 32% of homes here are flats and 68% are houses, across 18,759 households (ONS Census 2021).
Because 23% of Romford is privately rented and 11% socially rented, a lot of RM1 work is agreed with a landlord or managing agent rather than the person opening the door.
Expect solid London stock brick in RM1, some of it dry-lined during a later refurbishment, the pattern behind 18,759 households inside the RM1 neighbourhood behind the plaster in RM1. That is why fixings are picked in the room rather than off a van shelf, and why Romford gives us fixings landing in soft lime mortar joints instead of the brick body, and with 23% of homes here privately rented, it sets the booking date as often as the job does is the fault we are called back to undo.
Romford is outside the Congestion Charge zone but inside ULEZ; our vehicles are compliant, so nothing is added for it. What shapes the job more is the neighbourhood itself — market town turned regional centre — the market, the Brewery and a growing skyline — which is why a RM1 quote is not a Havering average.
On access, ring-road one-way system, market-day closures and booked lifts in the new blocks — one reason one fitter for a pivot or fixed screen; two for sliding and bi-fold enclosures and any wet-room panel over 190cm, which is awkward to hold plumb alone. Fitters travelling in use Romford (Elizabeth line).
Area at a glance
Romford RM1 by the numbers
Who lives in Romford and what they live in decides how bath and shower screen fitting is quoted and how long a visit takes. These are the published Census 2021 figures for the Central Romford and Romford East and Romford North and Romford North West and Romford South neighbourhood itself — not Havering-wide averages, and not estimates.
47,004
Residents
Central Romford and Romford East and Romford North and Romford North West and Romford South neighbourhood, Census 2021
18,759
Households
Median age 37.6
Flats vs houses
Flats 31.8%Houses 68.1%
Residents by sex
Male48.2%
Female51.8%
Single-person households
28.1%
Privately rented
22.7%
- Median age
- 37.6
- Owner-occupied
- 66.2%
- Social rented
- 11%
- Postcode districts
- RM1, RM7
- Nearest station
- Romford
- Parking
- CPZ + ULEZ
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhoods Central Romford, Romford East, Romford North, Romford North West, Romford South (E02000472, E02000474, E02000476, E02000477, E02000479) — the published geography that covers Romford, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL). Coordinates for the RM1 district: 51.5829, 0.1836 — Outward postcode centroid, postcodes.io (Ordnance Survey Open Data).
Common questions
Bath and shower screen fitting in Romford RM1 — your questions.
How much does bath and shower screen fitting cost in Romford RM1?
Pivot screen on a bath starts at £110 in Romford for Romford (RM1) addresses, with 66% owner-occupation locally, and every job is quoted as a fixed written price before a fitter is booked. Screen type and how far out of level the bath, tray or floor sits in this 32% flats neighbourhood. A packed-and-shimmed pivot screen is quick; a floor-fixed wet-room panel with no frame to hide the gap takes the longest to get plumb on Havering bookings, with 68% of Romford homes being houses.
Can you fit a shower screen on an old cast-iron bath in Romford RM1?
Yes — a pivot screen is £110. Cast-iron and reglazed baths in Romford's older stock are rarely level along the rim, with 18,759 households on this patch — and 68% of Romford homes being houses, so the hinge post is packed and shimmed until the screen itself reads plumb. The problem we fix most here is Romford gives us fixings landing in soft lime mortar joints instead of the brick body around Romford (Elizabeth line), with a median age of 38 in this neighbourhood, and with 23% of homes here privately rented, it sets the booking date as often as the job does.
Do you drill into tiles in RM1 without cracking them?
Yes, with a slow pilot hole and a bit rated for porcelain rather than standard masonry on RM1 jobs, with 11% social-rented stock nearby. Cracked glaze is the most common DIY mistake we're called to fix in Romford bathrooms around Romford (Elizabeth line).
I have mould around my old shower screen in Romford — can you just reseal it?
Yes, from £65. With 32% of Romford homes being flats, poor bathroom ventilation is common; we strip the old silicone fully, dry the substrate and reseal with neutral-cure sealant so it doesn't come back within a season around Romford (Elizabeth line) — and 68% of Romford homes being houses, with Romford Market a few streets away.
How quickly can you reach Romford from your Havering round?
Romford Market is the marker we route to on this side of Havering, with a median age of 38 in this neighbourhood, and ring-road one-way system, market-day closures and booked lifts in the new blocks. A RM1 slot added to an existing Havering round usually lands the same week rather than the next in this 32% flats neighbourhood, with 18,759 households on this patch.
Is same-day or evening bath and shower screen fitting available in Havering?
Most bookings are within a week, sooner for a re-seal call where damp has already started to show in this 32% flats neighbourhood, with 32% of homes here being flats. Romford sits close to Romford (Elizabeth line), with Havering parking rules in play, so we can usually add a RM1 job to an existing Havering round at short notice on this side of Havering.
Do you handle difficult access in Romford?
Ring-road one-way system, market-day closures and booked lifts in the new blocks on this side of Havering. Where a permit or a suspended bay is needed in London Borough of Havering it is itemised on the quote before the visit, never added afterwards in this 32% flats neighbourhood — and 32% of homes here being flats, with this being London Borough of Havering territory. On Romford jobs we confirm it when the slot is booked, not on the day.
Read next
Guides for Romford RM1
Three reads that answer what most people ask before they book.
Handyman
Reliable handyman services: costs, jobs and how to hire
Hourly rates, half-day jobs and the questions worth asking before booking.
Assembly
Flat-pack assembly: DIY or hire a pro?
Which builds are a two-hour job and which reliably eat a weekend.
Assembly
IKEA assembly without the hassle
Wardrobes, beds and kitchen units built and levelled the same day.
Free quote · 1-hour reply
Get a fixed price for Bath and shower screen fitting in Romford RM1
Two ways to go: price it yourself on the quote page, or pick a slot on the live booking calendar. Romford RM1 jobs are confirmed in writing before anyone travels, and the same crew covers the rest of havering.
No deposit is taken until the price and slot are confirmed in writing.