Havering · RM1 · Handyman
Handyman in Romford, RM1
Around Romford Market in Romford, RM1, the stock gives us solid London stock brick, some of it dry-lined during a later refurbishment — which is why the same shelf takes twenty minutes in one flat and an hour in the next. The usual Havering instruction is curtain poles, heavy mirrors and a full flat-pack wardrobe anchored to the wall.
- Trustpilot 4.5· 3,100+ reviews
- Google 3.9· 1,429 reviews
- £1m public liability
- Licensed waste carrier CBDU300454
- Since 2019
- £55 an hour, £190 a half day — fixed price for the whole list
- Solid London stock brick here, so the fixings are chosen for the wall, not pulled from a pack
- Stud, pipe and cable scan before the first hole, every visit
- London Borough of Havering permits, ULEZ and packaging removal already inside the price
The service, locally
Handyman work in Romford
- Per hour, one-hour minimum
- £55Per hour, one-hour minimum
- Romford homes are flats
- 32%Romford homes are flats
- Fixed-price jobs
- 14Fixed-price jobs
- Households in Romford
- 18,759Households in Romford
Instant estimate
Price your Romford job list
Estimated for Romford RM1
£90 – £255
Slot needed: One to two hours
- Curtain poles and blinds
- £60 – £150
- Mirrors, art and heavy hanging
- £55 – £130
- One-visit saving
- −£25
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. Batch the list into one visit and you pay for one set-up rather than three. Fixings, plugs and filler are already inside these figures.
How it works
How a Romford visit works
- Tell us the whole listA photo per wall lets us read the substrate before quoting, so the Romford RM1 price we send is the price you pay.
- Detector out before the drillEvery wall is scanned for studs, pipes and cables, sheets go down, and the fixing is matched to solid london stock brick rather than pulled from a pack.
- Load-tested, then clearedFixings are tested, holes made good, waste leaves in the van, and you sign the list off on site.
- Get my price
Walls and fixings
What is behind the plaster in Romford
Most likely here
Solid London stock brick — Victorian and Edwardian party and external walls
7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor. Realistic load: 40 kg-plus per fixing when anchored into brick, not mortar. What goes wrong: fixing into soft lime mortar joints, which spin out under load.
Lath and plaster
Pre-1930 terraces and mansion blocks
- Fixing
- Locate the timber lath studs, fix through into the stud with 5 × 80 mm screws
- Safe load
- Up to 25 kg into a stud, nothing into the plaster itself
- What pulls out
- A plasterboard plug in lime plaster crumbles the key and drops the whole panel
Solid London stock brick
Victorian and Edwardian party and external walls
- Fixing
- 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor
- Safe load
- 40 kg-plus per fixing when anchored into brick, not mortar
- What pulls out
- Fixing into soft lime mortar joints, which spin out under load
Dot-and-dab plasterboard
1990s onward new builds and conversions
- Fixing
- Long fixings through the void into the blockwork behind, or a spread-load anchor
- Safe load
- 30 kg with a through-fixing, 8 kg on a hollow-wall anchor alone
- What pulls out
- Short screws that only grip the board, then lever it off the dabs
Timber or metal stud partition
Flat conversions and 1960s-onward internal walls
- Fixing
- Stud detector, then fix into the upright; noggins added where the stud misses
- Safe load
- 35 kg into timber, 15 kg into metal stud with a toggle
- What pulls out
- Two of four bracket holes on the stud and two in fresh air
Precast concrete and blockwork
Post-war estates and podium blocks
- Fixing
- SDS drill, 8 mm hole, sleeve anchor or screwbolt
- Safe load
- 50 kg-plus per fixing
- What pulls out
- Hitting reinforcement or a buried conduit without a scan first
Insulated dry lining
Retrofitted period homes and low-energy refurbishments
- Fixing
- Insulation-rated frame fixings that reach the masonry beyond the board and foam
- Safe load
- 25 kg, spread across four points
- What pulls out
- Compressing the insulation so the fixing slowly works loose
Why Hello Services
Why Hello Services in Romford
Permits and parking included
London Borough of Havering visitor permits and suspensions are arranged and paid for by us across RM1.
Fixings and filler included
Screws, plugs, resin, silicone and filler come from the van, not from your invoice on the streets near Romford Market.
Packaging leaves with us
Flat-pack cardboard, polystyrene and old fittings go in the van at the end of the RM1 visit on the streets near Romford Market, with 66% owner-occupation locally.
DBS-checked and insured
£1m public liability and a tradesperson you would be happy to leave in the flat across RM1.
Fixed prices
Handyman prices in Romford
| Job | From | To | Time on site | What it covers |
|---|---|---|---|---|
| Radiator bleeding and TRV swaps | £60 | £140 | 1–2 hrs | System bled through, thermostatic valve heads replaced, pressure topped up |
| Door easing, hinges and closers | £55 | £140 | 1–2 hrs | Sticking doors planed and rehung, hinges packed, closers and stops fitted |
| Filling and patching | £70 | £180 | 1–3 hrs | Old fixing holes filled and sanded ready for a check-out inspection |
| Shelves and floating units | £65 | £180 | 1–3 hrs | Alcove shelving, floating shelves and brackets set to a laser line |
| Taps, washers and waste traps | £65 | £150 | 1–2 hrs | Dripping taps, isolation valves, sink and basin traps and flexible tails |
| Flat-pack assembly | £55 | £190 | 1–4 hrs | Wardrobes, beds, desks and drawer units built, levelled and anchored to the wall |
Radiator bleeding and TRV swaps
£60 – £140
1–2 hrs
System bled through, thermostatic valve heads replaced, pressure topped up
Door easing, hinges and closers
£55 – £140
1–2 hrs
Sticking doors planed and rehung, hinges packed, closers and stops fitted
Filling and patching
£70 – £180
1–3 hrs
Old fixing holes filled and sanded ready for a check-out inspection
Shelves and floating units
£65 – £180
1–3 hrs
Alcove shelving, floating shelves and brackets set to a laser line
Taps, washers and waste traps
£65 – £150
1–2 hrs
Dripping taps, isolation valves, sink and basin traps and flexible tails
Flat-pack assembly
£55 – £190
1–4 hrs
Wardrobes, beds, desks and drawer units built, levelled and anchored to the wall
Because 68% of homes here are houses, Romford RM1 lists lean towards these 6 jobs. Anything outside them is priced from the same 14-row card on the reference page.
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. Full price list, fixings matrix and scope policy.
Rates and local costs
Hourly, half day or full day in Romford
Hourly rate
£55
per hour, one-hour minimum
Best for one or two small jobs — a shelf, a leaking tap washer, a sticking door.
Half day
£190
up to 4 hours
The most-booked slot in London: three to six jobs from one list, one visit, one price.
Full day
£340
up to 8 hours
A snag list, a whole-flat furniture build, or a move-in day of fixings and fittings.
Same-day call-out
£95
first hour, then hourly
Lock, leak, door or safety job that cannot wait for a booked slot.
- Parking and permits
- London Borough of Havering visitor permits and bay suspensions are arranged, paid for by us and already inside the quoted figure.
- Charging zones
- Havering sits outside the Congestion Charge zone and inside ULEZ. Our vans are compliant, so ULEZ never appear on your invoice.
- Access and building rules
- Concierge sign-in, goods-lift booking and out-of-hours windows are handled before the visit, so the clock starts when the work does, not in reception.
Screws, plugs, resin anchors, hollow-wall fixings, silicone and filler come out of the van and are inside the price. Anything bought for you — a replacement tap, a door closer, a specific bracket — is charged at cost with the receipt attached to your invoice.
Scope
What is included in Romford
Included in every visit
- An insured, DBS-checked tradesperson who brings everything needed for a RM1 visit — tools, steps and floor protection.
- Van-stock anchors chosen for solid london stock brick, including 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor, at no extra charge.
- Detector before drill, laser line rather than eye, and a load test on each fixing before we sign off.
- Access worked out in advance for Romford RM1, with London Borough of Havering permits and charges already inside the price.
Not included — and why
- Gas appliances and pipework, which legally belong to a Gas Safe engineer.
- New circuits or consumer units, which are notifiable under Part P and need a registered electrician.
- Load-bearing or structural changes, which need building control approval from London Borough of Havering first.
- Any fixing that would disturb possible asbestos, which is surveyed first as a matter of policy.
The full scope policy, the complete fixings matrix and every fixed price sit on one page: handyman reference.
Coverage
Handyman work around Romford
Nearby areas we also cover
- Handyman in Gidea ParkRM2RM2
- Handyman in Collier RowRM5RM5
- Handyman in Harold Wood and Harold HillRM3RM3
- Handyman in HornchurchRM12RM12
- Handyman in Elm ParkRM12RM12
- Handyman in Chadwell HeathRM6 · Barking and DagenhamRM6
- Handyman in DagenhamRM10 · Barking and DagenhamRM10
- Handyman in Dagenham East and Rush GreenRM10 · Barking and DagenhamRM10
Guides
Read before you book
Hiring a handyman in the UK: the complete guide
Scope, legal limits, 2026 prices, vetting questions, wall fixings and a job-list method that gets more done in one visit.
18 min read
Handyman prices in London: what jobs actually cost in 2026
Hourly, half-day and fixed job prices, with the London extras that quietly add to a quote.
9 min read
What a handyman can and cannot legally do in the UK
The real line between handyman work and jobs that need a registered electrician, gas or structural trade.
7 min read
Wall fixings guide: which anchor holds in which London wall
The fixing that actually holds in each London wall type, and the realistic load it will take.
8 min read
Related services
Other work we do in Romford
End of tenancy cleaning
Fixing holes filled and touched in, then the whole Romford flat cleaned for check-out.
One-off deep cleaning
A RM1 reset after the drilling, sanding and flat-pack dust has settled.
After builders cleaning
Snag list finished by us, then the builders' dust taken out of the Romford flat.
Moving services
Furniture dismantled in RM1, moved, then rebuilt and re-anchored the same day.
House removals
A full Romford move where the beds and wardrobes come apart and go back together properly.
House clearance
Old furniture and broken fittings taken away from RM1 before the new ones go up.
About the area
Romford in context
Market town turned regional centre — the market, the Brewery and a growing skyline. New town-centre towers, Victorian terraces and interwar semis beyond, which is why RM1 work is dominated by solid London stock brick. Romford Market is the landmark most customers navigate by.
The stock around Romford Market sets the job. New town-centre towers, Victorian terraces and interwar semis beyond. With 32% of Romford's 18,759 households in flats, solid london stock brick is what our fitters meet on most RM1 visits. That substrate wants 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor; anything lighter is a call-back, and even done properly the sensible limit is 40 kg-plus per fixing when anchored into brick, not mortar.
Tenure shapes the list too: 23% of homes here are privately rented and 66% owner-occupied, so we move between check-out make-good in RM1 lets and long-planned improvements in the same week. Ring-road one-way system, market-day closures and booked lifts in the new blocks. Nearest arrival point for the team is Romford (Elizabeth line), and havering sits outside the Congestion Charge zone and inside ULEZ — none of it added to your invoice on the day.
- Housing mix here: 32% flats to 68% houses, 47,004 residents in total
- Solid London stock brick dominates Romford, so the van carries the anchors that suit it, not a generic pack
- Nearest station Romford (Elizabeth line); ring-road one-way system, market-day closures and booked lifts in the new blocks
- Covering RM1, RM7 and the streets around Romford Market, from £55 an hour
Where Romford sits in our coverage
Everything we fit in Romford is booked through our handyman work in Havering page, which sits under handyman work across London. The same crew works the adjoining postcodes too — handyman work in Gidea Park RM2 (0.9 miles), handyman work in Collier Row RM5 (1.5 miles), handyman work in Harold Wood and Harold Hill RM3 (2.2 miles), handyman work in Hornchurch RM12 (2.3 miles) and handyman work in Chadwell Heath RM6 (2.4 miles). If your address sits on the boundary, book the closest page — the price and the crew are the same. For every trade we run at this postcode, see all services in Romford.
Most booked alongside this in Romford
Romford RM1 at a glance
- Area
- Romford, Havering
- Postcodes served
- RM1, RM7
- Nearest station
- Romford (Elizabeth line)
- Dominant wall construction
- solid London stock brick, some of it dry-lined during a later refurbishment
- Fixing we use most
- 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor
- Realistic load
- 40 kg-plus per fixing when anchored into brick, not mortar
- Most-booked list
- curtain poles, heavy mirrors and a full flat-pack wardrobe anchored to the wall
- Watch out for
- fixings landing in soft lime mortar joints instead of the brick body
- Charging zones
- Havering sits outside the Congestion Charge zone and inside ULEZ
- Residents (Romford)
- 47,004
- Households (Romford)
- 18,759
- Typical visit
- Half a day in RM1
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhoods Central Romford, Romford East, Romford North, Romford North West, Romford South (E02000472, E02000474, E02000476, E02000477, E02000479) — the published geography that covers Romford, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL).
Questions
Romford RM1 handyman questions
£55 an hour with a one-hour minimum, £190 for a half day and £340 for a full day in RM1 in this 32% flats neighbourhood, with 28% one-person households here. Fixed-price jobs start at £55 — flat-pack from £55, TV mounting from £85, shelving from £65 for Romford (RM1) addresses, with 18,759 households on this patch. Send the list and we confirm one written figure on the Romford rounds.
Yes. Locally that usually means solid london stock brick — 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor, holding around 40 kg-plus per fixing when anchored into brick, not mortar on the Romford rounds, with 66% owner-occupation locally — and 32% of homes here being flats. The risk we guard against here is fixings landing in soft lime mortar joints instead of the brick body for Romford (RM1) addresses, with Romford Market a few streets away. Every wall is scanned for studs, pipes and cables before the first hole on the streets near Romford Market.
That is how we prefer to work in Romford on the streets near Romford Market. Once you are past three jobs, £190 for a half day beats paying the £55 hourly minimum three times over for Romford (RM1) addresses, with 68% of Romford homes being houses. Send photos of each wall with the list and the estimator on this page shows the one-visit saving before you book in Romford, with 11% social-rented stock nearby.
Replacing what is already there — faceplates, switches, pendants — yes on the streets near Romford Market, with 28% one-person households here, with a test on completion. Anything notifiable under Part P — new circuits, a consumer unit, bathroom zones — needs a registered electrician instead on Havering bookings, with Havering parking rules in play. Gas is Gas Safe work full stop, with 32% of homes here being flats, so we decline it and point you at an engineer who is registered for it on the Romford rounds.
Ring-road one-way system, market-day closures and booked lifts in the new blocks on this side of Havering. London Borough of Havering visitor permits and bay suspensions are arranged and paid for by us and sit inside the quoted price across RM1, with 68% of Romford homes being houses. Concierge sign-in and goods-lift booking are done before the visit around Romford (Elizabeth line), with this being London Borough of Havering territory, so the clock starts when the work does.
The van carries the consumables — screws, plugs, resin, hollow-wall anchors, silicone, filler — and they are inside the RM1 figure you were quoted across RM1, with Romford Market a few streets away. Because solid london stock brick is what we expect here, the right anchors for it are on board before the van sets off on the Romford rounds, with 32% of homes here being flats. Anything specific bought for you is charged at cost with the receipt attached to the invoice for Romford (RM1) addresses, with 11% social-rented stock nearby.
Yes. Every area in Havering has its own page on the streets near Romford Market, and we cross borough boundaries constantly. If your address sits on the edge of RM1, book the nearest page and we will confirm the same fixed price for Romford (RM1) addresses, with a median age of 38 in this neighbourhood.
Source: ONS Census 2021, borough totals via Nomis (table TS008, TS041, TS007A, TS044, TS054, TS003). Figures describe the whole borough, the smallest area ONS publishes every one of these tables for.
Book a handyman in Romford RM1
Send your job list and a photo of each wall for a fixed written price the same working day. Fixings, permits and taking the packaging away are already in the figure.
Handyman Services reviews from Greater London customers
4.5 ★ from 3,131 Trustpilot reviewsSulltan is the best handyman in London. He is very reliable and professional. I highly recommend.
Quick assembly of a big gas bbq . Friendly service too
Sulltan is the best handyman in London , Highly recommend ......
Read all 3 Handyman Services reviews from Greater London customers →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.