Camden · NW1 · Factory and industrial clearance
Same-week slots · Fully insured · Local Regent's Park fitters · Fixed written pricesLooking for factory and industrial clearance in Regent's Park NW1? We work in Regent's Park most weeks — nash terraces and villas facing the park, plus the zoo and Marylebone's northern edge — and price factory and industrial clearance against that reality rather than a London average. Fixed written quote from £680, insured fitters, every fixing torqued, and the flat-pack packaging taken away.
Overview
This page prices factory and industrial clearance for Regent's Park NW1 specifically: post-war stock, 55% privately rented and 3,014 households in total. Work starts at £680, fixed in writing, with parking and London Borough of Camden permit rules costed before an insured fitter travels.
How it works
Step 1
Every machine, rack and pallet is listed with a recover, resell or recycle decision against it, so nothing valuable leaves as waste by accident.
Step 2
We work only to plant that has been certified isolated, and we say so in writing rather than assuming the last shift switched it off.
Step 3
Consumables and benching first, then racking, then plant, so the floor stays clear enough to move the heavy items last.
Step 4
Ferrous, non-ferrous, WEEE and general are weighed separately, which is how the scrap credit on your invoice is calculated.
Step 5
Swarf and dust removed, floor swept, photographs and paperwork issued for the dilapidations claim.
Why choose us
Five to ten working days for a full unit, since the survey, isolation certificates and estate access all have to be in place first. A part clear around a working line can usually start within a week. Regent's Park (Bakerloo) is the nearest station, so a NW1 visit rarely needs a whole morning set aside.
We expect lath and plaster over timber studs in Regent's Park, with solid brick on the party and external walls, and with 43% one-person households in Regent's Park, one adult is usually the only pair of hands on site in NW1, and we carry the anchors, through-fixings and long bits that match. The mistake we spend most time undoing here is which crumbles the key and drops the panel, over a plasterboard plug spun into lime plaster, where 38% owner-occupation means the same home is booked again rather than a new tenant each year.
Upper-tier waste carrier registration with consignment paperwork for WEEE, oils and hazardous streams, plus a waste transfer note per load. Scrap is weighed on a certificated weighbridge so the credit on your invoice is auditable.
Three to six operatives depending on the plant, with skates, pallet trucks and a tail-lift 7.5t as standard and a HIAB where a machine cannot be moved to the bay by hand. Royal Parks vehicle restrictions, listed frontages needing protection and no kerbside loading on the Outer Circle.
Fixed prices
| Job | From | Typical time | What sets the price |
|---|---|---|---|
| Part clear, single production line | £680 | 6–8 hrs | One line stripped of tooling, benching and consumables while the rest of the unit keeps running, which is slower than clearing an empty floor. |
| Full unit clearance, up to 5,000 sq ft | £1,850 | 1–2 days | Priced by floor area and the density of what is left, since a light assembly unit and a machine shop of the same size are nothing alike to clear. |
| Machinery removal, per item | £320 | 2–4 hrs | Bolted-down plant has to be disconnected, jacked, skated to the door and loaded — that is rigging labour, not clearance labour. |
| Scrap metal recovery, per tonne | Credit | By load | Steel, copper and aluminium carry a resale value that we credit against the invoice rather than quietly keeping, which is what makes a metal-heavy unit cheaper to clear than an office of the same size. |
| WEEE and electrical plant, per pallet | £185 | 1–2 hrs | Motors, control panels and powered plant fall under WEEE and move on consignment paperwork to a permitted treatment facility. |
| Post-clear industrial sweep | £380 | 3–5 hrs | Swarf, oil residue and dust removed so the unit meets the dilapidations standard rather than merely being empty. |
Part clear, single production line
£680 · 6–8 hrs
One line stripped of tooling, benching and consumables while the rest of the unit keeps running, which is slower than clearing an empty floor.
Full unit clearance, up to 5,000 sq ft
£1,850 · 1–2 days
Priced by floor area and the density of what is left, since a light assembly unit and a machine shop of the same size are nothing alike to clear.
Machinery removal, per item
£320 · 2–4 hrs
Bolted-down plant has to be disconnected, jacked, skated to the door and loaded — that is rigging labour, not clearance labour.
Scrap metal recovery, per tonne
Credit · By load
Steel, copper and aluminium carry a resale value that we credit against the invoice rather than quietly keeping, which is what makes a metal-heavy unit cheaper to clear than an office of the same size.
WEEE and electrical plant, per pallet
£185 · 1–2 hrs
Motors, control panels and powered plant fall under WEEE and move on consignment paperwork to a permitted treatment facility.
Post-clear industrial sweep
£380 · 3–5 hrs
Swarf, oil residue and dust removed so the unit meets the dilapidations standard rather than merely being empty.
Industrial clearance is quoted plus VAT at 20% after a site survey, because floor area alone does not describe a unit. Scrap value is credited back on the invoice. Consignment notes for hazardous streams, transfer notes, ULEZ and any estate access charges are itemised separately.
Scope
The guys arrived prompt at 9 am . Sorry I’m rubbish at names but I remember the one guys initials were AB . He really worked hard . Both guys were very polite and were happy to pop back up the stairs to finish dusting the bedrooms surfaces that were missed . Not one moan… Read in full →
Hannah and her friend were friendly and thoughtful. They were very professional and hard working. They also turned a junk room into a nice bedroom. I cannot thank them or praise them enough.
This was my second job for Hello services and I was delighted to have Adam and Sultan back again. I had furniture assembly and clearance work to be done, and again it was done very professionally to a very high standard, and with absolute politeness at all times. They did an excellent job yet again… Read in full →
Read all 8 business clearance reviews →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.
Coverage
Also in this area
The parent commercial silo — offices, units, shops and estate handovers.
Rubble, plasterboard and strip-out waste removed with transfer notes issued.
Desks, chairs, IT and storage cleared out of hours to a handover date.
Mixed loads collected by volume with a same-day waste transfer note.
Working in Regent's Park
3,014 households sit inside the NW1 neighbourhood covering Regent's Park. The build is post-war, the tenure profile renter-heavy, and 92% of those homes are flats.
Because 55% of Regent's Park is privately rented and 7% socially rented, a lot of NW1 work is agreed with a landlord or managing agent rather than the person opening the door.
Regent's Park substrates run to lath and plaster over timber studs in Regent's Park, with solid brick on the party and external walls, and with 43% one-person households in Regent's Park, one adult is usually the only pair of hands on site. Nothing is drilled until the wall has been sounded, because which crumbles the key and drops the panel, over a plasterboard plug spun into lime plaster, where 38% owner-occupation means the same home is booked again rather than a new tenant each year is the mistake that costs a NW1 customer twice.
Regent's Park sits inside the Congestion Charge zone as well as ULEZ, so both are itemised on the quote rather than absorbed into an hourly rate. What shapes the job more is the neighbourhood itself — nash terraces and villas facing the park, plus the zoo and Marylebone's northern edge — which is why a NW1 quote is not a Camden average.
Royal Parks vehicle restrictions, listed frontages needing protection and no kerbside loading on the Outer Circle. Nearest station is Regent's Park (Bakerloo), and three to six operatives depending on the plant, with skates, pallet trucks and a tail-lift 7.5t as standard and a HIAB where a machine cannot be moved to the bay by hand.
Area at a glance
Who lives in Regent's Park and what they live in decides how factory and industrial clearance is quoted and how long a visit takes. These are the published Census 2021 figures for the Regent's Park neighbourhood itself — not Camden-wide averages, and not estimates.
6,056
Residents
Regent's Park neighbourhood, Census 2021
3,014
Households
Median age 33.6
Flats vs houses
Residents by sex
Single-person households
43.1%
Privately rented
55%
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhood Regent's Park (E02000967) — the published geography that covers Regent's Park, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL). Coordinates for the NW1 district: 51.5334, -0.1439 — Outward postcode centroid, postcodes.io (Ordnance Survey Open Data).
Part clear, single production line starts at £680 in Regent's Park for Regent's Park (NW1) addresses, with this being London Borough of Camden territory — and 38% owner-occupation locally, and every job is quoted as a fixed written price before a fitter is booked. The density and type of what is being removed on the streets near The Nash Terraces and London Zoo. Metal-heavy units carry a scrap credit that can cut the invoice substantially; units full of mixed production waste, plastics and contaminated packaging cost more at the gate and take longer to segregate around Regent's Park (Bakerloo) — and 3,014 households on this patch, with Camden parking rules in play.
Yes — IKEA, Argos, Wayfair, Made and independent brands are all built to the manufacturer's instructions on Camden bookings, with a median age of 34 in this neighbourhood. We are independent of every retailer; the names simply describe what we assemble in Regent's Park most weeks on the streets near The Nash Terraces and London Zoo, with this being London Borough of Camden territory.
5–2 hours. Sliding-door and corner wardrobes take two to four times as long because the tracks have to be dead level on NW1 jobs, with Camden parking rules in play.
That is exactly why we build in the room it will live in for Regent's Park (NW1) addresses. With 92% of Regent's Park homes being flats, narrow hallways and tight turns are the norm in Regent's Park, with 3,014 households on this patch — and 38% owner-occupation locally, so anything that will not pass a doorway once assembled is built where it stands.
Live electrical disconnection, which must be certified by a qualified electrician before we move the plant; Asbestos-containing insulation, lagging or cladding, which needs a licensed removal contractor; Bulk chemical stock or fuel in tanks on this side of Camden, with 55% of NW1 homes being privately rented — and 38% owner-occupation locally, which is a specialist hazardous waste contract; Structural demolition of the building itself, including mezzanine steelwork that forms part of the structure. Anything outside that scope is quoted separately so the Regent's Park NW1 price you agree is the price you pay on NW1 jobs, with this being a short walk from Regent's Park (Bakerloo).
All three. With 55% of Regent's Park privately rented and 38% owner-occupied, roughly half the NW1 diary is agent- or landlord-instructed and invoiced separately from the person at the door on the streets near The Nash Terraces and London Zoo — and 43% one-person households here, with a median age of 34 in this neighbourhood.
The Nash Terraces and London Zoo is the marker we route to on this side of Camden — and this being a short walk from Regent's Park (Bakerloo), with Camden parking rules in play, and royal Parks vehicle restrictions, listed frontages needing protection and no kerbside loading on the Outer Circle. A NW1 slot added to an existing Camden round usually lands the same week rather than the next on NW1 jobs, with 92% of homes here being flats.
Read next
Handyman
Hourly rates, half-day jobs and the questions worth asking before booking.
Assembly
Which builds are a two-hour job and which reliably eat a weekend.
Assembly
Wardrobes, beds and kitchen units built and levelled the same day.
Free quote · 1-hour reply
Two ways to go: price it yourself on the quote page, or pick a slot on the live booking calendar. Regent's Park NW1 jobs are confirmed in writing before anyone travels, and the same crew covers the rest of camden.
No deposit is taken until the price and slot are confirmed in writing.
