Booked around your day
Most builds are booked within a week, longer in spring when garden project demand peaks across London. Tulse Hill (Thameslink) is the nearest station, so a SW2 visit rarely needs a whole morning set aside.
Lambeth · SW2 · Shed assembly
Same-week slots · Fully insured · Local Tulse Hill fitters · Fixed written pricesWe provide shed assembly in Tulse Hill SW2 for houses and flats around Brockwell Park's southern edge. From £140, quoted in writing before the visit, with one fitter for a small shed on a ready base; two for anything over 8x6ft or where roof panels need lifting together The base is checked for level before the first panel is stood up.


Overview
Booked mostly by social-housing-led households around Tulse Hill, shed assembly here covers supply-free fitting from £140. With 80% of Tulse Hill's 3,391 homes in flats, lift access and stair carries in SW2 shape the slot length we hold.
How it works
Step 1
Base checked for level and size, and the shed's height and position checked against the garden's remaining permitted development allowance.
Step 2
Panels, roof struts and fixings checked against the parts list — a shed with a bent panel or a short bag of screws is found before the frame goes up, not halfway through.
Step 3
Floor and wall panels built up and squared before the roof goes on, since an out-of-square frame is what makes doors stick.
Step 4
Roof panels fitted, felt or shingle lapped correctly and any window or vent sealed.
Step 5
Ground anchors or wall straps fitted in exposed gardens, doors hung and eased, packaging taken away.
Why choose us
Most builds are booked within a week, longer in spring when garden project demand peaks across London. Tulse Hill (Thameslink) is the nearest station, so a SW2 visit rarely needs a whole morning set aside.
We expect precast concrete panels and dense blockwork in SW2, often with surface conduit, with 57% social-rented stock locally, block access is agreed with the estate office first in SW2, and we carry the anchors, through-fixings and long bits that match. The mistake we spend most time undoing here is drilling blind into a panel with reinforcement or a buried cable behind it, as the Tulse Hill stock goes, which is what a 80% flat share across the ONS neighbourhood covering Tulse Hill actually produces.
Fitters carry £5m public liability cover. Most garden sheds fall under permitted development if they sit under 2.5m at the eaves within 2m of a boundary and the total of all outbuildings stays under 50% of the garden — we flag it if a build looks close to either limit rather than assume it is fine.
One fitter for a small shed on a ready base; two for anything over 8x6ft or where roof panels need lifting together. Steep gradients, narrow railway bridges and permit bays near the station.
Fixed prices
| Job | From | Typical time | What sets the price |
|---|---|---|---|
| Small shed up to 6x4ft, base ready | £140 | 2–3 hrs | A one-piece or simple panel shed on an existing slab, framed, roofed and felted in a morning. |
| Medium shed 8x6ft, base ready | £220 | 3–5 hrs | More panels and a ridged roof mean more bracing before the structure is rigid enough to felt. |
| Large shed or workshop 10x8ft+, base ready | £320 | 5–7 hrs | Heavier framing, often double doors and a window, and usually a two-person lift for the roof panels. |
| Paving-slab base, per m² | £45 | By area | Compacted hardcore and a sand bed under the slabs, laid to a slight fall so water runs away from the shed floor. |
| Timber bearer base on an existing hard surface | £85 | 2–3 hrs | Pressure-treated bearers levelled and packed to keep the shed floor off standing water without a full slab. |
| Anchor kit for an exposed or elevated garden | £60 | 45–60 min | Ground anchors or wall straps fitted so the shed does not lift in a gust funnelled between two terraces. |
Small shed up to 6x4ft, base ready
£140 · 2–3 hrs
A one-piece or simple panel shed on an existing slab, framed, roofed and felted in a morning.
Medium shed 8x6ft, base ready
£220 · 3–5 hrs
More panels and a ridged roof mean more bracing before the structure is rigid enough to felt.
Large shed or workshop 10x8ft+, base ready
£320 · 5–7 hrs
Heavier framing, often double doors and a window, and usually a two-person lift for the roof panels.
Paving-slab base, per m²
£45 · By area
Compacted hardcore and a sand bed under the slabs, laid to a slight fall so water runs away from the shed floor.
Timber bearer base on an existing hard surface
£85 · 2–3 hrs
Pressure-treated bearers levelled and packed to keep the shed floor off standing water without a full slab.
Anchor kit for an exposed or elevated garden
£60 · 45–60 min
Ground anchors or wall straps fitted so the shed does not lift in a gust funnelled between two terraces.
Prices are labour to build the kit you supply, on a base that is level and ready. Roofing felt, fixings and standard anchor kits are included; a bespoke concrete base is quoted separately by the m². We flag before booking where a build looks close to the 2.5m eaves height or 50%-of-garden permitted development limits so you can check before ordering. Permits, ULEZ and the Congestion Charge where they apply are itemised.
Scope
Sulltan is the best handyman in London. He is very reliable and professional. I highly recommend.
Really pleased with our house move. The guys came on time, loaded everything carefully like a huge jigsaw! Nothing got broken and even though they were working on an hourly rate they were really efficient, not to waste any time. Our only criticism is that we needed a few items disassembled to get on the… Read in full →
Sulltan is the best handyman in London , Highly recommend ......
Read all 48 flat-pack assembly reviews →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.
Coverage
Also in this area
Garden sets, loungers, BBQs, parasols and shed bases built outside and weather-fixed.
Fitted and flat-pack wardrobes scribed to the wall and anchored so doors stay square.
TVs, mirrors, shelves and curtain poles fixed into the wall you actually have, in one visit.
Wardrobes, beds, desks and storage built, levelled and anchored to the wall.
Sheds emptied, dismantled and the base left clear and swept.
Working in Tulse Hill
In Tulse Hill (SW2) the split is 80% flats to 20% houses over 3,391 households, and the stock is mainly Victorian.
Because 19% of Tulse Hill is privately rented and 57% socially rented, a lot of SW2 work is agreed with a landlord or managing agent rather than the person opening the door.
Tulse Hill substrates run to precast concrete panels and dense blockwork in SW2, often with surface conduit, with 57% social-rented stock locally, block access is agreed with the estate office first. Nothing is drilled until the wall has been sounded, because drilling blind into a panel with reinforcement or a buried cable behind it, as the Tulse Hill stock goes, which is what a 80% flat share across the ONS neighbourhood covering Tulse Hill actually produces is the mistake that costs a SW2 customer twice.
Tulse Hill sits inside the Congestion Charge zone as well as ULEZ, so both are itemised on the quote rather than absorbed into an hourly rate. What shapes the job more is the neighbourhood itself — hillside streets between Brixton and West Norwood with big Victorian houses — which is why a SW2 quote is not a Lambeth average.
Getting to the door matters as much as the job: steep gradients, narrow railway bridges and permit bays near the station. Tulse Hill (Thameslink) is the nearest station, and one fitter for a small shed on a ready base; two for anything over 8x6ft or where roof panels need lifting together.
Area at a glance
Who lives in Tulse Hill and what they live in decides how shed assembly is quoted and how long a visit takes. These are the published Census 2021 figures for the Tulse Hill neighbourhood itself — not Lambeth-wide averages, and not estimates.
8,630
Residents
Tulse Hill neighbourhood, Census 2021
3,391
Households
Median age 33.6
Flats vs houses
Residents by sex
Single-person households
30.2%
Privately rented
18.5%
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhood Tulse Hill (E02000641) — the published geography that covers Tulse Hill, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL). Coordinates for the SW2 district: 51.4493, -0.1198 — Outward postcode centroid, postcodes.io (Ordnance Survey Open Data).
Small shed up to 6x4ft, base ready starts at £140 in Tulse Hill across SW2, with 20% of Tulse Hill homes being houses — and this being a short walk from Tulse Hill (Thameslink), and every job is quoted as a fixed written price before a fitter is booked. Shed size and whether the base already exists. A slab or bearer base adds a separate charge but saves the shed floor from sitting on wet grass or bare soil through its first winter for Tulse Hill (SW2) addresses, with 25% owner-occupation locally.
5m at the eaves within 2m of a boundary and all outbuildings together stay under half the garden on Lambeth bookings, with a median age of 34 in this neighbourhood. Many gardens in Tulse Hill are small enough that a large shed pushes close to that limit — we check before booking rather than after the kit is built in this 80% flats neighbourhood — and 20% of Tulse Hill homes being houses, with this being London Borough of Lambeth territory.
Yes — a paving-slab base is £45/m², with 3,391 households on this patch, or a timber bearer base from £85 where a full slab isn't needed on the Tulse Hill rounds. With 20% of Tulse Hill homes being houses with a garden, most jobs here are base-plus-build in one visit on SW2 jobs, with 30% one-person households here.
Not once anchored. Terraced gardens funnel wind between the houses more than an open plot does, so we fit ground anchors or wall straps as standard rather than leave it to the kit's own fixings on this side of Lambeth, which is drilling blind into a panel with reinforcement or a buried cable behind it, as the Tulse Hill stock goes, with a median age of 34 in this neighbourhood, which is what a 80% flat share across the ONS neighbourhood covering Tulse Hill actually produces on unanchored builds we're called back to.
Brockwell Park's southern edge is the marker we route to on this side of Lambeth, with a median age of 34 in this neighbourhood, and steep gradients, narrow railway bridges and permit bays near the station. A SW2 slot added to an existing Lambeth round usually lands the same week rather than the next on SW2 jobs, with 3,391 households on this patch.
Most builds are booked within a week, longer in spring when garden project demand peaks across London on Lambeth bookings, with this being a short walk from Tulse Hill (Thameslink). Tulse Hill sits close to Tulse Hill (Thameslink) in this 80% flats neighbourhood, with 19% of SW2 homes being privately rented, so we can usually add a SW2 job to an existing Lambeth round at short notice.
Steep gradients, narrow railway bridges and permit bays near the station on the streets near Brockwell Park's southern edge. Where a permit or a suspended bay is needed in London Borough of Lambeth it is itemised on the quote before the visit, never added afterwards across SW2 — and 25% owner-occupation locally, with a median age of 34 in this neighbourhood.
Read next
Handyman
Hourly rates, half-day jobs and the questions worth asking before booking.
Assembly
Which builds are a two-hour job and which reliably eat a weekend.
Assembly
Wardrobes, beds and kitchen units built and levelled the same day.
Free quote · 1-hour reply
Two ways to go: price it yourself on the quote page, or pick a slot on the live booking calendar. Tulse Hill SW2 jobs are confirmed in writing before anyone travels, and the same crew covers the rest of lambeth.
No deposit is taken until the price and slot are confirmed in writing.