Tower Hamlets · E1W · Handyman
Handyman in Wapping, E1W
Handyman in Wapping, E1W, in Tower Hamlets: grade ii warehouse lofts with exposed brick, plus 1980s dock-side blocks, so the walls here are dot-and-dab plasterboard over blockwork, with metal stud partitions between rooms. The list we are booked for most is TV mounting and flat-pack assembly on the day the keys are handed over, and the failure we are called back to fix is short screws that grip only the board and slowly lever it off the dabs.
- Trustpilot 4.5· 3,100+ reviews
- Google 3.9· 1,429 reviews
- £1m public liability
- Licensed waste carrier CBDU300454
- Since 2019
- £55 an hour, £190 a half day — fixed price for the whole list
- Dot-and-dab plasterboard here, so the fixings are chosen for the wall, not pulled from a pack
- Stud, pipe and cable scan before the first hole, every visit
- London Borough of Tower Hamlets permits, ULEZ and packaging removal already inside the price
The service, locally
Handyman work in Wapping
- Per hour, one-hour minimum
- £55Per hour, one-hour minimum
- Wapping homes are flats
- 89%Wapping homes are flats
- Fixed-price jobs
- 14Fixed-price jobs
- Households in Wapping
- 6,698Households in Wapping
Instant estimate
Price your Wapping job list
Estimated for Wapping E1W
£135 – £375
Slot needed: Half day
- Flat-pack assembly
- £55 – £190
- TV mounting
- £85 – £165
- One-visit saving
- −£25
- Lath, dot-and-dab or concrete fixings
- from £20
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. You have told us the walls are lath, dot-and-dab or concrete, so we have allowed for the correct anchors and the extra scanning time that goes with them.
How it works
How a Wapping visit works
- Send your job listSend every job in one message and we return a single written figure for the Wapping E1W visit, same working day.
- Detector out before the drillEvery wall is scanned for studs, pipes and cables, sheets go down, and the fixing is matched to dot-and-dab plasterboard rather than pulled from a pack.
- Load-tested, then clearedFixings are tested, holes made good, waste leaves in the van, and you sign the list off on site.
- Get my price
Walls and fixings
What is behind the plaster in Wapping
Most likely here
Dot-and-dab plasterboard — 1990s onward new builds and conversions
Long fixings through the void into the blockwork behind, or a spread-load anchor. Realistic load: 30 kg with a through-fixing, 8 kg on a hollow-wall anchor alone. What goes wrong: short screws that only grip the board, then lever it off the dabs.
Lath and plaster
Pre-1930 terraces and mansion blocks
- Fixing
- Locate the timber lath studs, fix through into the stud with 5 × 80 mm screws
- Safe load
- Up to 25 kg into a stud, nothing into the plaster itself
- What pulls out
- A plasterboard plug in lime plaster crumbles the key and drops the whole panel
Solid London stock brick
Victorian and Edwardian party and external walls
- Fixing
- 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor
- Safe load
- 40 kg-plus per fixing when anchored into brick, not mortar
- What pulls out
- Fixing into soft lime mortar joints, which spin out under load
Dot-and-dab plasterboard
1990s onward new builds and conversions
- Fixing
- Long fixings through the void into the blockwork behind, or a spread-load anchor
- Safe load
- 30 kg with a through-fixing, 8 kg on a hollow-wall anchor alone
- What pulls out
- Short screws that only grip the board, then lever it off the dabs
Timber or metal stud partition
Flat conversions and 1960s-onward internal walls
- Fixing
- Stud detector, then fix into the upright; noggins added where the stud misses
- Safe load
- 35 kg into timber, 15 kg into metal stud with a toggle
- What pulls out
- Two of four bracket holes on the stud and two in fresh air
Precast concrete and blockwork
Post-war estates and podium blocks
- Fixing
- SDS drill, 8 mm hole, sleeve anchor or screwbolt
- Safe load
- 50 kg-plus per fixing
- What pulls out
- Hitting reinforcement or a buried conduit without a scan first
Insulated dry lining
Retrofitted period homes and low-energy refurbishments
- Fixing
- Insulation-rated frame fixings that reach the masonry beyond the board and foam
- Safe load
- 25 kg, spread across four points
- What pulls out
- Compressing the insulation so the fixing slowly works loose
Why Hello Services
Why Hello Services in Wapping
Photographed and load-tested
Each fixing tested and documented, so landlords and agents get evidence without asking on the Wapping rounds.
We scan before we drill
Stud, pipe and cable detector on every Wapping wall before the first hole — not after the leak on Tower Hamlets bookings, with Tower Hamlets parking rules in play.
One visit, one fixed price
Your whole E1W list quoted in writing the same working day, with no doorstep re-quote on the Wapping rounds.
The right anchor for the wall
For E1W bookings, we carry the lot, because short screws that grip only the board and slowly lever it off the dabs is what a rushed job leaves behind on this side of Tower Hamlets, with 33% owner-occupation locally — and 37% one-person households here. Around Wapping (Overground) we allow for the parking and the walk-in before the slot is confirmed.
Fixed prices
Handyman prices in Wapping
| Job | From | To | Time on site | What it covers |
|---|---|---|---|---|
| TV mounting | £85 | £165 | 1–2 hrs | Bracket into the correct substrate, screen levelled, cables dropped or trunked |
| Flat-pack assembly | £55 | £190 | 1–4 hrs | Wardrobes, beds, desks and drawer units built, levelled and anchored to the wall |
| Curtain poles and blinds | £60 | £150 | 1–3 hrs | Poles, tracks and blinds fixed to timber, brick or reinforced plasterboard |
| Shelves and floating units | £65 | £180 | 1–3 hrs | Alcove shelving, floating shelves and brackets set to a laser line |
| Locks, handles and door furniture | £70 | £160 | 1–2 hrs | Euro cylinders, mortice locks, thumb turns and handles swapped like for like |
| Silicone and grout renewal | £70 | £170 | 1–3 hrs | Old bead cut out, surfaces sterilised and dried, sanitary silicone reapplied |
TV mounting
£85 – £165
1–2 hrs
Bracket into the correct substrate, screen levelled, cables dropped or trunked
Flat-pack assembly
£55 – £190
1–4 hrs
Wardrobes, beds, desks and drawer units built, levelled and anchored to the wall
Curtain poles and blinds
£60 – £150
1–3 hrs
Poles, tracks and blinds fixed to timber, brick or reinforced plasterboard
Shelves and floating units
£65 – £180
1–3 hrs
Alcove shelving, floating shelves and brackets set to a laser line
Locks, handles and door furniture
£70 – £160
1–2 hrs
Euro cylinders, mortice locks, thumb turns and handles swapped like for like
Silicone and grout renewal
£70 – £170
1–3 hrs
Old bead cut out, surfaces sterilised and dried, sanitary silicone reapplied
Because 89% of homes here are flats, Wapping E1W lists lean towards these 6 jobs. Anything outside them is priced from the same 14-row card on the reference page.
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. Full price list, fixings matrix and scope policy.
Rates and local costs
Hourly, half day or full day in Wapping
Hourly rate
£55
per hour, one-hour minimum
Best for one or two small jobs — a shelf, a leaking tap washer, a sticking door.
Half day
£190
up to 4 hours
The most-booked slot in London: three to six jobs from one list, one visit, one price.
Full day
£340
up to 8 hours
A snag list, a whole-flat furniture build, or a move-in day of fixings and fittings.
Same-day call-out
£95
first hour, then hourly
Lock, leak, door or safety job that cannot wait for a booked slot.
- Parking and permits
- London Borough of Tower Hamlets visitor permits and bay suspensions are arranged, paid for by us and already inside the quoted figure.
- Charging zones
- Part of Tower Hamlets sits inside the Congestion Charge zone and all of it is inside ULEZ. Our vans are compliant, so ULEZ and the Congestion Charge never appear on your invoice.
- Access and building rules
- Concierge sign-in, goods-lift booking and out-of-hours windows are handled before the visit, so the clock starts when the work does, not in reception.
Screws, plugs, resin anchors, hollow-wall fixings, silicone and filler come out of the van and are inside the price. Anything bought for you — a replacement tap, a door closer, a specific bracket — is charged at cost with the receipt attached to your invoice.
Scope
What is included in Wapping
Included in every visit
- One vetted fitter for the whole Wapping E1W list, with ladders, tools and sheets already in the van.
- Van-stock anchors chosen for dot-and-dab plasterboard, including Long fixings through the void into the blockwork behind, or a spread-load anchor, at no extra charge.
- Detector before drill, laser line rather than eye, and a load test on each fixing before we sign off.
- cobbled single-track lanes, warehouse hoists and lift-free upper floors in listed buildings — we plan the Wapping E1W arrival around it and settle permits with London Borough of Tower Hamlets ourselves.
Not included — and why
- Anything gas — boilers, hobs, pipework — is Gas Safe territory and we will not touch it in Wapping E1W.
- Part P notifiable electrics — new circuits and boards — go to a registered electrician, not a handyman.
- Load-bearing or structural changes, which need building control approval from London Borough of Tower Hamlets first.
- Any fixing that would disturb possible asbestos, which is surveyed first as a matter of policy.
The full scope policy, the complete fixings matrix and every fixed price sit on one page: handyman reference.
Coverage
Handyman work around Wapping
Nearby areas we also cover
Guides
Read before you book
Hiring a handyman in the UK: the complete guide
Scope, legal limits, 2026 prices, vetting questions, wall fixings and a job-list method that gets more done in one visit.
18 min read
Handyman prices in London: what jobs actually cost in 2026
Hourly, half-day and fixed job prices, with the London extras that quietly add to a quote.
9 min read
What a handyman can and cannot legally do in the UK
The real line between handyman work and jobs that need a registered electrician, gas or structural trade.
7 min read
Wall fixings guide: which anchor holds in which London wall
The fixing that actually holds in each London wall type, and the realistic load it will take.
8 min read
Related services
Other work we do in Wapping
End of tenancy cleaning
Fixing holes filled and touched in, then the whole Wapping flat cleaned for check-out.
One-off deep cleaning
A E1W reset after the drilling, sanding and flat-pack dust has settled.
After builders cleaning
Snag list finished by us, then the builders' dust taken out of the Wapping flat.
Moving services
Furniture dismantled in E1W, moved, then rebuilt and re-anchored the same day.
House removals
A full Wapping move where the beds and wardrobes come apart and go back together properly.
House clearance
Old furniture and broken fittings taken away from E1W before the new ones go up.
About the area
Wapping in context
Riverside warehouse conversions, cobbled lanes and historic pubs. Grade II warehouse lofts with exposed brick, plus 1980s dock-side blocks, which is why E1W work is dominated by dot-and-dab plasterboard over blockwork. The Prospect of Whitby and St Katharine Docks is the landmark most customers navigate by.
The stock around The Prospect of Whitby and St Katharine Docks sets the job. Grade II warehouse lofts with exposed brick, plus 1980s dock-side blocks. With 89% of Wapping's 6,698 households in flats, dot-and-dab plasterboard is what our fitters meet on most E1W visits. That substrate wants long fixings through the void into the blockwork behind, or a spread-load anchor; anything lighter is a call-back, and even done properly the sensible limit is 30 kg with a through-fixing, 8 kg on a hollow-wall anchor alone.
Tenure shapes the list too: 48% of homes here are privately rented and 33% owner-occupied, so we move between check-out make-good in E1W lets and long-planned improvements in the same week. Cobbled single-track lanes, warehouse hoists and lift-free upper floors in listed buildings. Nearest arrival point for the team is Wapping (Overground), and part of Tower Hamlets sits inside the Congestion Charge zone and all of it is inside ULEZ — none of it added to your invoice on the day.
- Housing mix here: 89% flats to 11% houses, 14,780 residents in total
- Default fixing for Wapping: long fixings through the void into the blockwork behind, or a spread-load anchor, load-tested to 30 kg with a through-fixing, 8 kg on a hollow-wall anchor alone
- Access: cobbled single-track lanes, warehouse hoists and lift-free upper floors in listed buildings
- Covering E1W and the streets around The Prospect of Whitby and St Katharine Docks, from £55 an hour
Where Wapping sits in our coverage
Everything we fit in Wapping is booked through our handyman work in Tower Hamlets page, which sits under handyman work across London. The same crew works the adjoining postcodes too — handyman work in Shadwell E1 (0.6 miles), handyman work in Tower Hill and St Katharine Docks E1 (0.6 miles), handyman work in Whitechapel E1 (0.6 miles), handyman work in Rotherhithe SE16 (0.9 miles) and handyman work in Limehouse E14 (1.8 miles). If your address sits on the boundary, book the closest page — the price and the crew are the same. For every trade we run at this postcode, see all services in Wapping.
Most booked alongside this in Wapping
Wapping E1W at a glance
- Area
- Wapping, Tower Hamlets
- Postcodes served
- E1W
- Nearest station
- Wapping (Overground)
- Dominant wall construction
- dot-and-dab plasterboard over blockwork, with metal stud partitions between rooms
- Fixing we use most
- Long fixings through the void into the blockwork behind, or a spread-load anchor
- Realistic load
- 30 kg with a through-fixing, 8 kg on a hollow-wall anchor alone
- Most-booked list
- TV mounting and flat-pack assembly on the day the keys are handed over
- Watch out for
- short screws that grip only the board and slowly lever it off the dabs
- Charging zones
- Part of Tower Hamlets sits inside the Congestion Charge zone and all of it is inside ULEZ
- Residents (Wapping)
- 14,780
- Households (Wapping)
- 6,698
- Typical visit
- Half a day in E1W
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhoods St George in the East & Wapping North, Tower Hill & Wapping South (E02000889, E02000890) — the published geography that covers Wapping, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL).
Questions
Wapping E1W handyman questions
£55 an hour with a one-hour minimum, £190 for a half day and £340 for a full day in E1W in this 89% flats neighbourhood, with a median age of 33 in this neighbourhood. Fixed-price jobs start at £55 — flat-pack from £55, TV mounting from £85, shelving from £65 on this side of Tower Hamlets, with this being London Borough of Tower Hamlets territory. Send the list and we confirm one written figure in Wapping.
Yes. Locally that usually means dot-and-dab plasterboard — long fixings through the void into the blockwork behind on the Wapping rounds — and 89% of homes here being flats, with Tower Hamlets parking rules in play, or a spread-load anchor, holding around 30 kg with a through-fixing, 8 kg on a hollow-wall anchor alone. The risk we guard against here is short screws that grip only the board and slowly lever it off the dabs for Wapping (E1W) addresses, with a median age of 33 in this neighbourhood. Every wall is scanned for studs, pipes and cables before the first hole on the streets near The Prospect of Whitby and St Katharine Docks.
That is how we prefer to work in Wapping on this side of Tower Hamlets. Once you are past three jobs, £190 for a half day beats paying the £55 hourly minimum three times over across E1W, with The Prospect of Whitby and St Katharine Docks a few streets away. Send photos of each wall with the list and the estimator on this page shows the one-visit saving before you book on the streets near The Prospect of Whitby and St Katharine Docks, with 11% of Wapping homes being houses.
Swapping an existing socket face, switch or light fitting in Wapping is fine on Tower Hamlets bookings, with 37% one-person households here, and it is tested before we leave. New circuits, consumer units and anything notifiable under Part P, no in Wapping. Gas work of any kind is Gas Safe registered work and we will not touch it — we will tell you who should for Wapping (E1W) addresses, with 89% of homes here being flats.
Cobbled single-track lanes, warehouse hoists and lift-free upper floors in listed buildings in this 89% flats neighbourhood. London Borough of Tower Hamlets visitor permits and bay suspensions are arranged and paid for by us and sit inside the quoted price on this side of Tower Hamlets, with this being a short walk from Wapping (Overground). Concierge sign-in and goods-lift booking are done before the visit in Wapping, with 11% of Wapping homes being houses, so the clock starts when the work does.
Everyday fixings and filler are ours to supply: they are priced into the job before we arrive in Wapping on the Wapping rounds, with 37% one-person households here. We stock for the Wapping substrate specifically, so long fixings through the void into the blockwork behind on E1W jobs, with Tower Hamlets parking rules in play, or a spread-load anchor does not turn into a trip to a merchant. Specified items — a particular handle, a named tap — are bought at cost and the receipt goes on your invoice on the streets near The Prospect of Whitby and St Katharine Docks, with a median age of 33 in this neighbourhood.
Yes. Every area in Tower Hamlets has its own page on the streets near The Prospect of Whitby and St Katharine Docks, and we cross borough boundaries constantly. If your address sits on the edge of E1W, book the nearest page and we will confirm the same fixed price on E1W jobs, with 89% of homes here being flats.
Source: ONS Census 2021, borough totals via Nomis (table TS008, TS041, TS007A, TS044, TS054, TS003). Figures describe the whole borough, the smallest area ONS publishes every one of these tables for.
Book a handyman in Wapping E1W
Send your job list and a photo of each wall for a fixed written price the same working day. Fixings, permits and taking the packaging away are already in the figure.
Handyman Services reviews from Greater London customers
4.5 ★ from 3,131 Trustpilot reviewsSulltan is the best handyman in London. He is very reliable and professional. I highly recommend.
Quick assembly of a big gas bbq . Friendly service too
Sulltan is the best handyman in London , Highly recommend ......
Read all 3 Handyman Services reviews from Greater London customers →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.