Tower Hamlets · E3 · Handyman
Handyman in Mile End, E3
Around Mile End Park's Green Bridge in Mile End, E3, the stock gives us precast concrete panels and dense blockwork, often with surface conduit — which is why the same shelf takes twenty minutes in one flat and an hour in the next. The usual Tower Hamlets instruction is safety fixings, door furniture and shelving drilled into concrete with an SDS.
- Trustpilot 4.5· 3,100+ reviews
- Google 3.9· 1,429 reviews
- £1m public liability
- Licensed waste carrier CBDU300454
- Since 2019
- £55 an hour, £190 a half day — fixed price for the whole list
- Precast concrete and blockwork here, so the fixings are chosen for the wall, not pulled from a pack
- Stud, pipe and cable scan before the first hole, every visit
- London Borough of Tower Hamlets permits, ULEZ and packaging removal already inside the price
The service, locally
Handyman work in Mile End
- Per hour, one-hour minimum
- £55Per hour, one-hour minimum
- Mile End homes are flats
- 89%Mile End homes are flats
- Fixed-price jobs
- 14Fixed-price jobs
- Households in Mile End
- 7,837Households in Mile End
Instant estimate
Price your Mile End job list
Estimated for Mile End E3
£110 – £320
Slot needed: One to two hours
- Door easing, hinges and closers
- £55 – £140
- Child and rental safety fixings
- £60 – £160
- One-visit saving
- −£25
- Lath, dot-and-dab or concrete fixings
- from £20
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. You have told us the walls are lath, dot-and-dab or concrete, so we have allowed for the correct anchors and the extra scanning time that goes with them.
How it works
How a Mile End visit works
- Send your job listSend every job in one message and we return a single written figure for the Mile End E3 visit, same working day.
- We scan, then drillNothing is drilled blind: we scan, mark, protect the floor and choose for precast concrete and blockwork.
- Tested and tidiedWe load-test each fixing, take the cardboard and old fittings away, and walk the list with you — London Borough of Tower Hamlets permits already settled.
- Get my price
Walls and fixings
What is behind the plaster in Mile End
Most likely here
Precast concrete and blockwork — Post-war estates and podium blocks
SDS drill, 8 mm hole, sleeve anchor or screwbolt. Realistic load: 50 kg-plus per fixing. What goes wrong: hitting reinforcement or a buried conduit without a scan first.
Lath and plaster
Pre-1930 terraces and mansion blocks
- Fixing
- Locate the timber lath studs, fix through into the stud with 5 × 80 mm screws
- Safe load
- Up to 25 kg into a stud, nothing into the plaster itself
- What pulls out
- A plasterboard plug in lime plaster crumbles the key and drops the whole panel
Solid London stock brick
Victorian and Edwardian party and external walls
- Fixing
- 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor
- Safe load
- 40 kg-plus per fixing when anchored into brick, not mortar
- What pulls out
- Fixing into soft lime mortar joints, which spin out under load
Dot-and-dab plasterboard
1990s onward new builds and conversions
- Fixing
- Long fixings through the void into the blockwork behind, or a spread-load anchor
- Safe load
- 30 kg with a through-fixing, 8 kg on a hollow-wall anchor alone
- What pulls out
- Short screws that only grip the board, then lever it off the dabs
Timber or metal stud partition
Flat conversions and 1960s-onward internal walls
- Fixing
- Stud detector, then fix into the upright; noggins added where the stud misses
- Safe load
- 35 kg into timber, 15 kg into metal stud with a toggle
- What pulls out
- Two of four bracket holes on the stud and two in fresh air
Precast concrete and blockwork
Post-war estates and podium blocks
- Fixing
- SDS drill, 8 mm hole, sleeve anchor or screwbolt
- Safe load
- 50 kg-plus per fixing
- What pulls out
- Hitting reinforcement or a buried conduit without a scan first
Insulated dry lining
Retrofitted period homes and low-energy refurbishments
- Fixing
- Insulation-rated frame fixings that reach the masonry beyond the board and foam
- Safe load
- 25 kg, spread across four points
- What pulls out
- Compressing the insulation so the fixing slowly works loose
Why Hello Services
Why Hello Services in Mile End
One visit, one fixed price
Your whole E3 list quoted in writing the same working day, with no doorstep re-quote on Tower Hamlets bookings.
The right anchor for the wall
We carry the lot, because drilling blind into a panel with reinforcement or a buried cable behind it is what a rushed job leaves behind on E3 jobs, with 29% of E3 homes being privately rented.
Permits and parking included
London Borough of Tower Hamlets visitor permits and suspensions are arranged and paid for by us on this side of Tower Hamlets, with Tower Hamlets parking rules in play. On Mile End jobs we confirm it when the slot is booked, not on the day.
Fixings and filler included
Screws, plugs, resin, silicone and filler come from the van, not from your invoice on this side of Tower Hamlets. London Borough of Tower Hamlets rules apply where the kerb or a bay suspension is involved.
Fixed prices
Handyman prices in Mile End
| Job | From | To | Time on site | What it covers |
|---|---|---|---|---|
| Flat-pack assembly | £55 | £190 | 1–4 hrs | Wardrobes, beds, desks and drawer units built, levelled and anchored to the wall |
| TV mounting | £85 | £165 | 1–2 hrs | Bracket into the correct substrate, screen levelled, cables dropped or trunked |
| Shelves and floating units | £65 | £180 | 1–3 hrs | Alcove shelving, floating shelves and brackets set to a laser line |
| Mirrors, art and heavy hanging | £55 | £130 | 1–2 hrs | Heavy mirrors and framed pieces hung level on the right anchor for the wall |
| Curtain poles and blinds | £60 | £150 | 1–3 hrs | Poles, tracks and blinds fixed to timber, brick or reinforced plasterboard |
| Locks, handles and door furniture | £70 | £160 | 1–2 hrs | Euro cylinders, mortice locks, thumb turns and handles swapped like for like |
Flat-pack assembly
£55 – £190
1–4 hrs
Wardrobes, beds, desks and drawer units built, levelled and anchored to the wall
TV mounting
£85 – £165
1–2 hrs
Bracket into the correct substrate, screen levelled, cables dropped or trunked
Shelves and floating units
£65 – £180
1–3 hrs
Alcove shelving, floating shelves and brackets set to a laser line
Mirrors, art and heavy hanging
£55 – £130
1–2 hrs
Heavy mirrors and framed pieces hung level on the right anchor for the wall
Curtain poles and blinds
£60 – £150
1–3 hrs
Poles, tracks and blinds fixed to timber, brick or reinforced plasterboard
Locks, handles and door furniture
£70 – £160
1–2 hrs
Euro cylinders, mortice locks, thumb turns and handles swapped like for like
Because 89% of homes here are flats, Mile End E3 lists lean towards these 6 jobs. Anything outside them is priced from the same 14-row card on the reference page.
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. Full price list, fixings matrix and scope policy.
Rates and local costs
Hourly, half day or full day in Mile End
Hourly rate
£55
per hour, one-hour minimum
Best for one or two small jobs — a shelf, a leaking tap washer, a sticking door.
Half day
£190
up to 4 hours
The most-booked slot in London: three to six jobs from one list, one visit, one price.
Full day
£340
up to 8 hours
A snag list, a whole-flat furniture build, or a move-in day of fixings and fittings.
Same-day call-out
£95
first hour, then hourly
Lock, leak, door or safety job that cannot wait for a booked slot.
- Parking and permits
- London Borough of Tower Hamlets visitor permits and bay suspensions are arranged, paid for by us and already inside the quoted figure.
- Charging zones
- Part of Tower Hamlets sits inside the Congestion Charge zone and all of it is inside ULEZ. Our vans are compliant, so ULEZ and the Congestion Charge never appear on your invoice.
- Access and building rules
- Concierge sign-in, goods-lift booking and out-of-hours windows are handled before the visit, so the clock starts when the work does, not in reception.
Screws, plugs, resin anchors, hollow-wall fixings, silicone and filler come out of the van and are inside the price. Anything bought for you — a replacement tap, a door closer, a specific bracket — is charged at cost with the receipt attached to your invoice.
Scope
What is included in Mile End
Included in every visit
- One vetted fitter for the whole Mile End E3 list, with ladders, tools and sheets already in the van.
- SDS drill, 8 mm hole, sleeve anchor or screwbolt and the rest of our van stock, because precast concrete and blockwork is what most E3 fixings go into.
- Scanning, levelling and load-testing on every hole — plus packaging and old fittings taken away.
- Access worked out in advance for Mile End E3, with London Borough of Tower Hamlets permits and charges already inside the price.
Not included — and why
- Gas appliances and pipework, which legally belong to a Gas Safe engineer.
- New circuits or consumer units, which are notifiable under Part P and need a registered electrician.
- Anything structural in Mile End E3: that route starts with London Borough of Tower Hamlets building control, and we will point you there.
- Asbestos disturbance — pre-2000 artex, soffits and boards near E3 are surveyed, never drilled blind.
The full scope policy, the complete fixings matrix and every fixed price sit on one page: handyman reference.
Coverage
Handyman work around Mile End
Nearby areas we also cover
Guides
Read before you book
Hiring a handyman in the UK: the complete guide
Scope, legal limits, 2026 prices, vetting questions, wall fixings and a job-list method that gets more done in one visit.
18 min read
Handyman prices in London: what jobs actually cost in 2026
Hourly, half-day and fixed job prices, with the London extras that quietly add to a quote.
9 min read
What a handyman can and cannot legally do in the UK
The real line between handyman work and jobs that need a registered electrician, gas or structural trade.
7 min read
Wall fixings guide: which anchor holds in which London wall
The fixing that actually holds in each London wall type, and the realistic load it will take.
8 min read
Related services
Other work we do in Mile End
End of tenancy cleaning
Fixing holes filled and touched in, then the whole Mile End flat cleaned for check-out.
One-off deep cleaning
A E3 reset after the drilling, sanding and flat-pack dust has settled.
After builders cleaning
Snag list finished by us, then the builders' dust taken out of the Mile End flat.
Moving services
Furniture dismantled in E3, moved, then rebuilt and re-anchored the same day.
House removals
A full Mile End move where the beds and wardrobes come apart and go back together properly.
House clearance
Old furniture and broken fittings taken away from E3 before the new ones go up.
About the area
Mile End in context
Queen Mary's campus, the park's green bridge and canal-side flats. Student halls, Victorian terraces and 1970s estate blocks, which is why E3 work is dominated by precast concrete panels and dense blockwork. Mile End Park's Green Bridge is the landmark most customers navigate by.
The stock around Mile End Park's Green Bridge sets the job. Student halls, Victorian terraces and 1970s estate blocks. With 89% of Mile End's 7,837 households in flats, precast concrete and blockwork is what our fitters meet on most E3 visits. The anchor that suits it is sDS drill, 8 mm hole, sleeve anchor or screwbolt — realistically holding 50 kg-plus per fixing once it is load-tested.
28% of Mile End households own their home and 26% are single-person, which is why so many E3 bookings are one long list saved up for a single half-day visit at £190. Getting to you is part of the price: student-turnover peaks in September, Mile End Road red route and estate lift booking London Borough of Tower Hamlets permits and suspensions are arranged and paid for by us, and part of Tower Hamlets sits inside the Congestion Charge zone and all of it is inside ULEZ.
- 89% flats, 11% houses across 7,837 Mile End households (ONS Census 2021)
- Precast concrete and blockwork dominates Mile End, so the van carries the anchors that suit it, not a generic pack
- Access: student-turnover peaks in September, Mile End Road red route and estate lift booking
- E3, E1 covered, Mile End Park's Green Bridge to the borough boundary, £190 a half day
Where Mile End sits in our coverage
Mile End is one of the neighbourhoods on our handyman work in Tower Hamlets page, which sits under handyman work across London. Nearest pages to this one, in travel order: handyman work in Bow E3 (under ½ mile), handyman work in Limehouse E14 (1.5 miles), handyman work in Bethnal Green E2 (1.6 miles), handyman work in Stepney E1 (1.7 miles) and handyman work in Whitechapel E1 (1.7 miles). If your address sits on the boundary, book the closest page — the price and the crew are the same. For every trade we run at this postcode, see all services in Mile End.
Most booked alongside this in Mile End
Mile End E3 at a glance
- Area
- Mile End, Tower Hamlets
- Postcodes served
- E3, E1
- Nearest station
- Mile End (Central, District, Hammersmith & City)
- Dominant wall construction
- precast concrete panels and dense blockwork, often with surface conduit
- Fixing we use most
- SDS drill, 8 mm hole, sleeve anchor or screwbolt
- Realistic load
- 50 kg-plus per fixing
- Most-booked list
- safety fixings, door furniture and shelving drilled into concrete with an SDS
- Watch out for
- drilling blind into a panel with reinforcement or a buried cable behind it
- Charging zones
- Part of Tower Hamlets sits inside the Congestion Charge zone and all of it is inside ULEZ
- Residents (Mile End)
- 23,659
- Households (Mile End)
- 7,837
- Typical visit
- Half a day in E3
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhoods Mile End East & Burdett Estate, Mile End West (E02000873, E02000877) — the published geography that covers Mile End, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL).
Questions
Mile End E3 handyman questions
£55 an hour with a one-hour minimum, £190 for a half day and £340 for a full day in E3 on the streets near Mile End Park's Green Bridge, with 29% of E3 homes being privately rented. Fixed-price jobs start at £55 — flat-pack from £55, TV mounting from £85, shelving from £65 on E3 jobs, with Mile End Park's Green Bridge a few streets away. Send the list and we confirm one written figure on the Mile End rounds.
Yes. Locally that usually means precast concrete and blockwork — sds drill, 8 mm hole, sleeve anchor or screwbolt, holding around 50 kg-plus per fixing on the Mile End rounds, with this being London Borough of Tower Hamlets territory. The risk we guard against here is drilling blind into a panel with reinforcement or a buried cable behind it for Mile End (E3) addresses, with this being a short walk from Mile End (Central, District, Hammersmith & City). Every wall is scanned for studs, pipes and cables before the first hole on the streets near Mile End Park's Green Bridge.
Batching is the whole point of a E3 half-day slot in Mile End. Three or more jobs in one half-day slot means one set-up, one parking arrangement and one price of £190 rather than three separate call-outs around Mile End (Central, District, Hammersmith & City), with Tower Hamlets parking rules in play. Send photos of each wall with the list and the estimator on this page shows the one-visit saving before you book in this 89% flats neighbourhood, with a median age of 28 in this neighbourhood.
Replacing what is already there — faceplates, switches, pendants — yes on E3 jobs, with this being London Borough of Tower Hamlets territory, with a test on completion. Anything notifiable under Part P — new circuits, a consumer unit, bathroom zones — needs a registered electrician instead on the streets near Mile End Park's Green Bridge, with a median age of 28 in this neighbourhood. Gas work of any kind is Gas Safe registered work and we will not touch it — we will tell you who should on Tower Hamlets bookings, with Tower Hamlets parking rules in play.
Student-turnover peaks in September, Mile End Road red route and estate lift booking around Mile End (Central, District, Hammersmith & City). London Borough of Tower Hamlets visitor permits and bay suspensions are arranged and paid for by us and sit inside the quoted price on E3 jobs, with 29% of E3 homes being privately rented. Concierge sign-in and goods-lift booking are done before the visit on the Mile End rounds, with Mile End Park's Green Bridge a few streets away, so the clock starts when the work does.
Standard screws, plugs, resin and hollow-wall anchors, silicone and filler come out of the van and are already in the price for Mile End (E3) addresses, with this being a short walk from Mile End (Central, District, Hammersmith & City). Loading for precast concrete and blockwork in advance is why a E3 visit rarely needs a mid-job supply run on the streets near Mile End Park's Green Bridge, with 28% owner-occupation locally. Specified items — a particular handle, a named tap — are bought at cost and the receipt goes on your invoice across E3, with 43% social-rented stock nearby.
Yes. Every area in Tower Hamlets has its own page around Mile End (Central, District, Hammersmith & City), and we cross borough boundaries constantly. If your address sits on the edge of E3, book the nearest page and we will confirm the same fixed price on the streets near Mile End Park's Green Bridge, with 28% owner-occupation locally.
Source: ONS Census 2021, borough totals via Nomis (table TS008, TS041, TS007A, TS044, TS054, TS003). Figures describe the whole borough, the smallest area ONS publishes every one of these tables for.
Book a handyman in Mile End E3
Send your job list and a photo of each wall for a fixed written price the same working day. Fixings, permits and taking the packaging away are already in the figure.
Handyman Services reviews from Greater London customers
4.5 ★ from 3,131 Trustpilot reviewsSulltan is the best handyman in London. He is very reliable and professional. I highly recommend.
Quick assembly of a big gas bbq . Friendly service too
Sulltan is the best handyman in London , Highly recommend ......
Read all 3 Handyman Services reviews from Greater London customers →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.