Richmond upon Thames · TW10 · Handyman
Handyman in Richmond Hill and Ham, TW10
**Odd jobs in Richmond Hill and Ham** (TW10, Richmond upon Thames) are decided by what is behind the plaster: solid London stock brick, some of it dry-lined during a later refurbishment. Most TW10 visits are curtain poles, heavy mirrors and a full flat-pack wardrobe anchored to the wall. We scan for studs, pipes and cables before the first hole, every time.
- £55 an hour, £190 a half day — fixed price for the whole list
- Solid London stock brick here, so the fixings are chosen for the wall, not pulled from a pack
- Stud, pipe and cable scan before the first hole, every visit
- London Borough of Richmond upon Thames permits, ULEZ and packaging removal already inside the price
The service, locally
Handyman work in Richmond Hill and Ham
- Per hour, one-hour minimum
- £55Per hour, one-hour minimum
- Richmond Hill and Ham homes are flats
- 35%Richmond Hill and Ham homes are flats
- Fixed-price jobs
- 14Fixed-price jobs
- Households in Richmond Hill and Ham
- 2,156Households in Richmond Hill and Ham
Instant estimate
Price your Richmond Hill and Ham job list
Estimated for Richmond Hill and Ham TW10
£90 – £255
Slot needed: One to two hours
- Curtain poles and blinds
- £60 – £150
- Mirrors, art and heavy hanging
- £55 – £130
- One-visit saving
- −£25
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. Batch the list into one visit and you pay for one set-up rather than three. Fixings, plugs and filler are already inside these figures.
How it works
How a Richmond Hill and Ham visit works
- Photos and a listSend every job in one message and we return a single written figure for the Richmond Hill and Ham TW10 visit, same working day.
- Scan first, drill secondNothing is drilled blind: we scan, mark, protect the floor and choose for solid london stock brick.
- Signed off with youWe load-test each fixing, take the cardboard and old fittings away, and walk the list with you — London Borough of Richmond upon Thames permits already settled.
- Get my price
Walls and fixings
What is behind the plaster in Richmond Hill and Ham
Most likely here
Solid London stock brick — Victorian and Edwardian party and external walls
7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor. Realistic load: 40 kg-plus per fixing when anchored into brick, not mortar. What goes wrong: fixing into soft lime mortar joints, which spin out under load.
Lath and plaster
Pre-1930 terraces and mansion blocks
- Fixing
- Locate the timber lath studs, fix through into the stud with 5 × 80 mm screws
- Safe load
- Up to 25 kg into a stud, nothing into the plaster itself
- What pulls out
- A plasterboard plug in lime plaster crumbles the key and drops the whole panel
Solid London stock brick
Victorian and Edwardian party and external walls
- Fixing
- 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor
- Safe load
- 40 kg-plus per fixing when anchored into brick, not mortar
- What pulls out
- Fixing into soft lime mortar joints, which spin out under load
Dot-and-dab plasterboard
1990s onward new builds and conversions
- Fixing
- Long fixings through the void into the blockwork behind, or a spread-load anchor
- Safe load
- 30 kg with a through-fixing, 8 kg on a hollow-wall anchor alone
- What pulls out
- Short screws that only grip the board, then lever it off the dabs
Timber or metal stud partition
Flat conversions and 1960s-onward internal walls
- Fixing
- Stud detector, then fix into the upright; noggins added where the stud misses
- Safe load
- 35 kg into timber, 15 kg into metal stud with a toggle
- What pulls out
- Two of four bracket holes on the stud and two in fresh air
Precast concrete and blockwork
Post-war estates and podium blocks
- Fixing
- SDS drill, 8 mm hole, sleeve anchor or screwbolt
- Safe load
- 50 kg-plus per fixing
- What pulls out
- Hitting reinforcement or a buried conduit without a scan first
Insulated dry lining
Retrofitted period homes and low-energy refurbishments
- Fixing
- Insulation-rated frame fixings that reach the masonry beyond the board and foam
- Safe load
- 25 kg, spread across four points
- What pulls out
- Compressing the insulation so the fixing slowly works loose
Fixed prices
Handyman prices in Richmond Hill and Ham
| Job | From | To | Time on site | What it covers |
|---|---|---|---|---|
| Door easing, hinges and closers | £55 | £140 | 1–2 hrs | Sticking doors planed and rehung, hinges packed, closers and stops fitted |
| Locks, handles and door furniture | £70 | £160 | 1–2 hrs | Euro cylinders, mortice locks, thumb turns and handles swapped like for like |
| Radiator bleeding and TRV swaps | £60 | £140 | 1–2 hrs | System bled through, thermostatic valve heads replaced, pressure topped up |
| Shelves and floating units | £65 | £180 | 1–3 hrs | Alcove shelving, floating shelves and brackets set to a laser line |
| Flat-pack assembly | £55 | £190 | 1–4 hrs | Wardrobes, beds, desks and drawer units built, levelled and anchored to the wall |
| Filling and patch painting | £70 | £180 | 1–3 hrs | Old fixing holes filled, sanded and touched in ready for a check-out inspection |
Door easing, hinges and closers
£55 – £140
1–2 hrs
Sticking doors planed and rehung, hinges packed, closers and stops fitted
Locks, handles and door furniture
£70 – £160
1–2 hrs
Euro cylinders, mortice locks, thumb turns and handles swapped like for like
Radiator bleeding and TRV swaps
£60 – £140
1–2 hrs
System bled through, thermostatic valve heads replaced, pressure topped up
Shelves and floating units
£65 – £180
1–3 hrs
Alcove shelving, floating shelves and brackets set to a laser line
Flat-pack assembly
£55 – £190
1–4 hrs
Wardrobes, beds, desks and drawer units built, levelled and anchored to the wall
Filling and patch painting
£70 – £180
1–3 hrs
Old fixing holes filled, sanded and touched in ready for a check-out inspection
Because 65% of homes here are houses, Richmond Hill and Ham TW10 lists lean towards these 6 jobs. Anything outside them is priced from the same 14-row card on the reference page.
£55 minimum charge per visit. Prices include VAT, the van, fixings from our own stock and taking the packaging away. Nothing is added on the day without your written agreement first. Full price list, fixings matrix and scope policy.
Why Hello Services
Why Hello Services in Richmond Hill and Ham
Fixings and filler included
Screws, plugs, resin, silicone and filler come from the van, not from your invoice.
Packaging leaves with us
Flat-pack cardboard, polystyrene and old fittings go in the van at the end of the TW10 visit.
DBS-checked and insured
£5m public liability and a tradesperson you would be happy to leave in the flat.
Photographed and load-tested
Each fixing tested and documented, so landlords and agents get evidence without asking.
Rates and local costs
Hourly, half day or full day in Richmond Hill and Ham
Hourly rate
£55
per hour, one-hour minimum
Best for one or two small jobs — a shelf, a leaking tap washer, a sticking door.
Half day
£190
up to 4 hours
The most-booked slot in London: three to six jobs from one list, one visit, one price.
Full day
£340
up to 8 hours
A snag list, a whole-flat furniture build, or a move-in day of fixings and fittings.
Same-day call-out
£95
first hour, then hourly
Lock, leak, door or safety job that cannot wait for a booked slot.
- Parking and permits
- London Borough of Richmond upon Thames visitor permits and bay suspensions are arranged, paid for by us and already inside the quoted figure.
- Charging zones
- Richmond upon Thames sits outside the Congestion Charge zone and inside ULEZ. Our vans are compliant, so ULEZ never appear on your invoice.
- Access and building rules
- Concierge sign-in, goods-lift booking and out-of-hours windows are handled before the visit, so the clock starts when the work does, not in reception.
Screws, plugs, resin anchors, hollow-wall fixings, silicone and filler come out of the van and are inside the price. Anything bought for you — a replacement tap, a door closer, a specific bracket — is charged at cost with the receipt attached to your invoice.
Scope
What is included in Richmond Hill and Ham
Included in every visit
- One vetted fitter for the whole Richmond Hill and Ham TW10 list, with ladders, tools and sheets already in the van.
- Van-stock anchors chosen for solid london stock brick, including 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor, at no extra charge.
- Detector before drill, laser line rather than eye, and a load test on each fixing before we sign off.
- extremely steep hill, narrow riverside lanes at Ham and conservation-area limits — we plan the Richmond Hill and Ham TW10 arrival around it and settle permits with London Borough of Richmond upon Thames ourselves.
Not included — and why
- Gas appliances and pipework, which legally belong to a Gas Safe engineer.
- Part P notifiable electrics — new circuits and boards — go to a registered electrician, not a handyman.
- Anything structural in Richmond Hill and Ham TW10: that route starts with London Borough of Richmond upon Thames building control, and we will point you there.
- Any fixing that would disturb possible asbestos, which is surveyed first as a matter of policy.
The full scope policy, the complete fixings matrix and every fixed price sit on one page: handyman reference.
Coverage
Handyman work around Richmond Hill and Ham
Nearby areas we also cover
What customers say about handyman work
3.9 ★ from 1,412 Google reviewsI'm answering on behalf my wife who was & still is in hospital & can't get wifi , Your two gentlemen were absolutely brilliant very impressed with the results I'm hoping my wife will be home soon so she can see the results before I make a mess when I come from the garden. Eric… Read in full →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.
Guides
Read before you book
Hiring a handyman in the UK: the complete guide
Scope, legal limits, 2026 prices, vetting questions, wall fixings and a job-list method that gets more done in one visit.
18 min read
Handyman prices in London: what jobs actually cost in 2026
Hourly, half-day and fixed job prices, with the London extras that quietly add to a quote.
9 min read
What a handyman can and cannot legally do in the UK
The real line between handyman work and jobs that need a registered electrician, gas or structural trade.
7 min read
Wall fixings guide: which anchor holds in which London wall
The fixing that actually holds in each London wall type, and the realistic load it will take.
8 min read
Related services
Other work we do in Richmond Hill and Ham
End of tenancy cleaning
Fixing holes filled and touched in, then the whole Richmond Hill and Ham flat cleaned for check-out.
One-off deep cleaning
A TW10 reset after the drilling, sanding and flat-pack dust has settled.
After builders cleaning
Snag list finished by us, then the builders' dust taken out of the Richmond Hill and Ham flat.
Moving services
Furniture dismantled in TW10, moved, then rebuilt and re-anchored the same day.
House removals
A full Richmond Hill and Ham move where the beds and wardrobes come apart and go back together properly.
House clearance
Old furniture and broken fittings taken away from TW10 before the new ones go up.
About the area
Richmond Hill and Ham in context
Most of Richmond Hill and Ham reads the same way from the pavement: georgian terraces on the hill, ham's post-war estates and span houses. solid London stock brick is what we meet most in TW10, and Ham House and the Richmond Hill view is the fixed point crews route by.
Census 2021 counts 5,411 residents in Richmond Hill and Ham, 35% of them in flats. Georgian terraces on the hill, Ham's post-war estates and Span houses. Practically, that means solid london stock brick and a fixing chosen for it. On that wall we use 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor, and we will tell you the honest ceiling: 40 kg-plus per fixing when anchored into brick, not mortar.
Because 15% of homes here are rented privately, we are often working to an agent's deadline — photographs of every fixing and an itemised invoice come as standard. Access is planned before the van leaves. Extremely steep hill, narrow riverside lanes at Ham and conservation-area limits. Where London Borough of Richmond upon Thames needs a visitor permit or a bay suspension we book it, and richmond upon Thames sits outside the Congestion Charge zone and inside ULEZ.
- Housing mix here: 35% flats to 65% houses, 5,411 residents in total
- Default fixing for Richmond Hill and Ham: 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor, load-tested to 40 kg-plus per fixing when anchored into brick, not mortar
- Access: extremely steep hill, narrow riverside lanes at Ham and conservation-area limits
- TW10 covered, Ham House and the Richmond Hill view to the borough boundary, £190 a half day
Where Richmond Hill and Ham sits in our coverage
Richmond Hill and Ham is one of the neighbourhoods on our handyman work in Richmond upon Thames page, which sits under handyman work across London. Same-week crews working this postcode also cover handyman work in Twickenham (1.0 miles), handyman work in Richmond (1.6 miles), handyman work in Teddington (1.9 miles), handyman work in Mortlake and East Sheen (2.0 miles) and handyman work in Kingston Vale and Coombe (2.1 miles). If your address sits on the boundary, book the closest page — the price and the crew are the same.
Richmond Hill and Ham TW10 at a glance
- Area
- Richmond Hill and Ham, Richmond upon Thames
- Postcodes served
- TW10
- Nearest station
- Richmond (District, Overground, South Western)
- Dominant wall construction
- solid London stock brick, some of it dry-lined during a later refurbishment
- Fixing we use most
- 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor
- Realistic load
- 40 kg-plus per fixing when anchored into brick, not mortar
- Most-booked list
- curtain poles, heavy mirrors and a full flat-pack wardrobe anchored to the wall
- Watch out for
- fixings landing in soft lime mortar joints instead of the brick body
- Charging zones
- Richmond upon Thames sits outside the Congestion Charge zone and inside ULEZ
- Residents (Richmond Hill and Ham)
- 5,411
- Households (Richmond Hill and Ham)
- 2,156
- Typical visit
- Half a day in TW10
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhood Ham (E02000800) — the published geography that covers Richmond Hill and Ham, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL).
Questions
Richmond Hill and Ham TW10 handyman questions
£55 an hour with a one-hour minimum, £190 for a half day and £340 for a full day in TW10. Fixed-price jobs start at £55 — flat-pack from £55, TV mounting from £85, shelving from £65. Send the list and we confirm one written figure.
Yes. Locally that usually means solid london stock brick — 7 mm hammer-drilled hole into the brick body, nylon plug or resin anchor, holding around 40 kg-plus per fixing when anchored into brick, not mortar. The risk we guard against here is fixings landing in soft lime mortar joints instead of the brick body. Every wall is scanned for studs, pipes and cables before the first hole.
Please do: one visit to Richmond Hill and Ham beats three. Three or more jobs in one half-day slot means one set-up, one parking arrangement and one price of £190 rather than three separate call-outs. Send photos of each wall with the list and the estimator on this page shows the one-visit saving before you book.
Replacing what is already there — faceplates, switches, pendants — yes, with a test on completion. New circuits, consumer units and anything notifiable under Part P, no. Gas is Gas Safe work full stop, so we decline it and point you at an engineer who is registered for it.
Extremely steep hill, narrow riverside lanes at Ham and conservation-area limits. London Borough of Richmond upon Thames visitor permits and bay suspensions are arranged and paid for by us and sit inside the quoted price. Concierge sign-in and goods-lift booking are done before the visit, so the clock starts when the work does.
The van carries the consumables — screws, plugs, resin, hollow-wall anchors, silicone, filler — and they are inside the TW10 figure you were quoted. Loading for solid london stock brick in advance is why a TW10 visit rarely needs a mid-job supply run. Anything specific bought for you is charged at cost with the receipt attached to the invoice.
Yes. Every area in Richmond upon Thames has its own page, and we cross borough boundaries constantly. If your address sits on the edge of TW10, book the nearest page and we will confirm the same fixed price.
Source: ONS Census 2021, borough totals via Nomis (table TS008, TS041, TS007A, TS044, TS054, TS003). Figures describe the whole borough, the smallest area ONS publishes every one of these tables for.
Book a handyman in Richmond Hill and Ham TW10
Send your job list and a photo of each wall for a fixed written price the same working day. Fixings, permits and taking the packaging away are already in the figure.
What customers say about handyman work
3.9 ★ from 1,412 Google reviewsI'm answering on behalf my wife who was & still is in hospital & can't get wifi , Your two gentlemen were absolutely brilliant very impressed with the results I'm hoping my wife will be home soon so she can see the results before I make a mess when I come from the garden. Eric… Read in full →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.