Crew sized to the job
One fitter for doors and panels; two where a wall tunnel is core-drilled and the debris has to be carried out of a flat. Steep hill roads, driveways and new estate roads with easy access.
Sutton · SM2 · Cat flap fitting
Same-week slots · Fully insured · Local Belmont and Banstead edge fitters · Fixed written pricesCat flap fitting in Belmont and Banstead edge SM2, Sutton, from £75. Hillside streets around the old hospital site, with the downs beyond, which is why our SM2 quotes account for steep hill roads, driveways and new estate roads with easy access. You get a fixed price in writing, an insured fitter and a tidy finish.


Overview
Booked mostly by owner-occupier-led households around Belmont, cat flap fitting here covers supply-free fitting from £75. With 21% of Belmont and Banstead edge's 3,212 homes in flats, lift access and stair carries in SM2 shape the slot length we hold.
How it works
Step 1
Timber, uPVC, composite, glass or masonry — plus what is behind it. A cavity wall or a glazed panel changes the job completely.
Step 2
Measured to your cat's chest height, so an older or arthritic cat still uses it in two years' time.
Step 3
Template marked, cut from both faces to avoid blow-out, and the edge lined, capped or sealed.
Step 4
Flap fitted square, sealed against draughts and rain, and the fixings drawn up evenly so the frame does not bow.
Step 5
Microchips registered, curfew set if you want one, and the flap left in training mode with the mess cleared.
Why choose us
One fitter for doors and panels; two where a wall tunnel is core-drilled and the debris has to be carried out of a flat. Steep hill roads, driveways and new estate roads with easy access.
Most cat flap bookings are within 48 hours and take a single short visit. Belmont (Southern) is the nearest station, so a SM2 visit rarely needs a whole morning set aside.
We expect cavity brickwork outside, over timber stud partitions inside — the pattern behind 3,212 households inside the SM2 neighbourhood in SM2, and we carry the anchors, through-fixings and long bits that match. The mistake we spend most time undoing here is a four-hole bracket with two screws in a stud and two in fresh air on these streets — and with 21% one-person households in Belmont and Banstead edge, one adult is usually the only pair of hands on site.
Fitters carry £5m public liability cover. We check leasehold and landlord consent before cutting anything, and we will not cut a communal fire door — that would void its rating and the block's fire strategy.
Fixed prices
| Job | From | Typical time | What sets the price |
|---|---|---|---|
| Timber door | £75 | 45–60 min | Cut, chamfered and sealed so the door edge does not swell in winter. |
| uPVC door panel | £95 | 1–1.5 hrs | The panel is cut in place with the frame protected, and the cut edge capped so water cannot track in. |
| Composite door | £120 | 1–2 hrs | A composite has a foam core between two skins; both faces must be cut cleanly and the core sealed. |
| Brick or block wall, up to 350mm | £190 | 2–3 hrs | Core-drilled both sides with a tunnel liner fitted, so the cavity is never left open. |
| Glass panel — cut-out supplied by a glazier | £110 | 1 hr | Toughened glass cannot be cut on site; we template it, fit the replacement pane and set the flap. |
| Microchip flap set-up and training mode | £25 | 15–20 min | Chips registered, curfew and selective entry configured, and the flap left on training setting. |
Timber door
£75 · 45–60 min
Cut, chamfered and sealed so the door edge does not swell in winter.
uPVC door panel
£95 · 1–1.5 hrs
The panel is cut in place with the frame protected, and the cut edge capped so water cannot track in.
Composite door
£120 · 1–2 hrs
A composite has a foam core between two skins; both faces must be cut cleanly and the core sealed.
Brick or block wall, up to 350mm
£190 · 2–3 hrs
Core-drilled both sides with a tunnel liner fitted, so the cavity is never left open.
Glass panel — cut-out supplied by a glazier
£110 · 1 hr
Toughened glass cannot be cut on site; we template it, fit the replacement pane and set the flap.
Microchip flap set-up and training mode
£25 · 15–20 min
Chips registered, curfew and selective entry configured, and the flap left on training setting.
Prices are labour and fitting materials; the flap itself can be supplied at cost or you can provide your own. Glass cut-outs are quoted by a glazier and shown separately. Where a lease or a landlord consent is needed we will tell you before booking rather than after. Permits, ULEZ and the Congestion Charge where they apply are itemised.
Scope
Sulltan is the best handyman in London. He is very reliable and professional. I highly recommend.
I booked online last minute, as I needed a handyman urgently for the next day. When I called Hello Services, I spoke to Michelle and she was extremely helpful and arranged everything within 15 mins. Adam the handy man then came to fix my wardrobe sliding door, which were jammed and came off the ledge… Read in full →
Sulltan is the best handyman in London , Highly recommend ......
Read all 26 cat flap fitting reviews →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.
Coverage
Also in this area
Gripper, underlay, doorbars and stairs fitted, with the old floor lifted and taken away.
Wardrobes, beds, desks and storage built, levelled and anchored to the wall.
Floating and bracketed shelving into plaster, brick, stud and dot-and-dab.
Garden sets, loungers, BBQs, parasols and shed bases built outside and weather-fixed.
Bath and shower screens fitted, sealed and tested so the seal holds, not just looks right.
Working in Belmont and Banstead edge
Census 2021 puts Belmont and Banstead edge at 3,212 households with a median age of 43.8. The inter-war stock is owner-occupier-led, which is why 79% houses and 21% flats need different handling in SM2.
15% of households rent privately and 82% own, which is why cat flap fitting demand here peaks around tenancy changeovers and completion dates.
Walls are cavity brickwork outside, over timber stud partitions inside — the pattern behind 3,212 households inside the SM2 neighbourhood, so the fixing that matters in Belmont and Banstead edge is chosen on site — the usual failure here is a four-hole bracket with two screws in a stud and two in fresh air on these streets — and with 21% one-person households in Belmont and Banstead edge, one adult is usually the only pair of hands on site.
Anyone who knows Belmont and Banstead edge knows the pattern near The Royal Marsden at Belmont: hillside streets around the old hospital site, with the downs beyond. We plan the SM2 visit around it. Belmont and Banstead edge is outside the Congestion Charge zone but inside ULEZ; our vehicles are compliant, so nothing is added for it.
Steep hill roads, driveways and new estate roads with easy access. Nearest station is Belmont (Southern), and one fitter for doors and panels; two where a wall tunnel is core-drilled and the debris has to be carried out of a flat.
Area at a glance
Who lives in Belmont and Banstead edge and what they live in decides how cat flap fitting is quoted and how long a visit takes. These are the published Census 2021 figures for the Belmont & South Cheam neighbourhood itself — not Sutton-wide averages, and not estimates.
8,721
Residents
Belmont & South Cheam neighbourhood, Census 2021
3,212
Households
Median age 43.8
Flats vs houses
Residents by sex
Single-person households
21.3%
Privately rented
15.4%
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhood Belmont & South Cheam (E02006836) — the published geography that covers Belmont and Banstead edge, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL). Coordinates for the SM2 district: 51.3518, -0.1988 — Outward postcode centroid, postcodes.io (Ordnance Survey Open Data).
Timber door starts at £75 in Belmont and Banstead edge across SM2, with this being London Borough of Sutton territory, and every job is quoted as a fixed written price before a fitter is booked. The material sets the price. Timber is quickest, uPVC and composite need capping in this 21% flats neighbourhood, with 82% owner-occupation locally, and a masonry wall means core drilling and a lined tunnel.
Yes — £95, an hour to 90 minutes. The panel is cut in place and the edge capped on Sutton bookings, so the door stays weatherproof. If it is glazed, a glazier supplies a pane with the cut-out in Belmont and Banstead edge.
Yes, in writing. 15% of Belmont and Banstead edge homes are privately rented on the Belmont and Banstead edge rounds, with The Royal Marsden at Belmont a few streets away, and a flap cut without consent is a common deposit deduction. Send the email and we fit to its conditions on Sutton bookings.
Yes, from £190 for a wall up to 350mm — the usual answer in Belmont and Banstead edge for Belmont and Banstead edge (SM2) addresses — and 15% of SM2 homes being privately rented, with Sutton parking rules in play, where 21% of homes are flats with glazed back doors: we core-drill and fit a lined tunnel.
All three. With 15% of Belmont and Banstead edge privately rented and 82% owner-occupied, roughly half the SM2 diary is agent- or landlord-instructed and invoiced separately from the person at the door on the streets near The Royal Marsden at Belmont — and 82% owner-occupation locally, with Sutton parking rules in play.
The Royal Marsden at Belmont is the marker we route to for Belmont and Banstead edge (SM2) addresses, with a median age of 44 in this neighbourhood, and steep hill roads, driveways and new estate roads with easy access. A SM2 slot added to an existing Sutton round usually lands the same week rather than the next in this 21% flats neighbourhood, with 3,212 households on this patch.
Most cat flap bookings are within 48 hours and take a single short visit on the streets near The Royal Marsden at Belmont. Belmont and Banstead edge sits close to Belmont (Southern) for Belmont and Banstead edge (SM2) addresses, with 2% social-rented stock nearby, so we can usually add a SM2 job to an existing Sutton round at short notice.
Read next
Handyman
Hourly rates, half-day jobs and the questions worth asking before booking.
Assembly
Which builds are a two-hour job and which reliably eat a weekend.
Assembly
Wardrobes, beds and kitchen units built and levelled the same day.
Free quote · 1-hour reply
Two ways to go: price it yourself on the quote page, or pick a slot on the live booking calendar. Belmont and Banstead edge SM2 jobs are confirmed in writing before anyone travels, and the same crew covers the rest of sutton.
No deposit is taken until the price and slot are confirmed in writing.