Jet Washing in Old Windsor
Exterior pressure washing for patios, driveways and paths. Vetted, insured crews across SL4 — with a fixed price agreed before we start, from £45.
- Trustpilot 4.5· 3,100+ reviews
- Google 3.9· 1,429 reviews
- £1m public liability
- Licensed waste carrier CBDU300454
- Since 2019
Jet Washing · Old Windsor
from £45
Fixed price, quoted before we arrive
- Postcodes
- SL4
- Availability
- 7 days
- Cover
- £1m liability
- Licence
- CBDU300454
What we can show you for Old Windsor
Old Windsor access and housing notes
SL4 housing stock and loading reality, written for Old Windsor rather than the county.
Jet Washing in Old Windsor: what actually matters here
A Royal Borough village south of Windsor on the Thames, sharing its ward with Datchet, Horton and Wraysbury and reached along the riverside road below the Great Park.
The housing stock is Interwar and post-war housing along the Straight Road corridor, riverside cottages and bungalows toward the lock, and larger detached properties on the park side, which decides the tools, protection and crew size we bring to a jet washing job.
The riverside lanes are narrow with limited turning, and this stretch of the Thames sits inside the Environment Agency's Datchet to Hythe End flood-alert area, so winter access to the lowest-lying roads can be restricted at short notice and we check conditions before a large vehicle is committed. Royal Borough residents use Stafferton Way in Maidenhead, with an Advantage Card or ID and a per-visit permit for vans and trailers.
We treat Old Windsor as one service area: Old Windsor village, Wraysbury, Straight Road and Runnymede edge and the rest of SL4 share the same jet washing price list and the same crews.
Old Windsor is a smaller town, and addresses around Runnymede meadows and the Old Windsor Thames lock in particular tend to need the access details confirmed before the van is loaded — we ask about that at quote stage, not on the day.
What a jet washing job includes
Jet washing is exterior pressure cleaning for hard surfaces — driveways, patios, paths, steps, walls and decking. The method matters more than the machine: block paving and concrete take a rotary flat-surface cleaner at working pressure, while render, painted masonry and older slabs take a soft wash with a cleaning solution and low pressure, because a lance held too close permanently scars soft stone and blows the joints out of paving.
Before the machine starts
- Surface identified and tested on a low-visibility area to set the right pressure
- Loose growth, moss and debris swept and scraped off
- Drains, gullies and airbricks covered so run-off silt does not block them
- Doors, windows, planting and neighbouring boundaries screened
The clean
- Rotary flat-surface cleaning for an even finish without the striping a hand lance leaves
- Edges, steps, kerbs and awkward corners detailed by hand lance
- Weeds and moss taken out of joints as the surface is worked
- Soft-wash treatment on render, painted brick and anything the pressure test says is too soft for the lance
Finishing
- Silt and run-off rinsed off and swept, not left on the lawn or the pavement
- Kiln-dried sand re-brushed into block-paving joints where the joints were washed out
- Site left tidy with covers removed and drains checked clear
What changes the price on a jet washing job
- Weather changes the result rather than the price — a cold, wet week means a longer drying window before any sealing could be considered.
- Pressure washing cleans; it does not restore. Where paving has permanently discoloured, spalled or been stained by oil or rust, it will come up cleaner but not new, and we say which of yours is which before we start.
- Old and soft surfaces set the pressure. Loose-jointed or poorly laid paving, soft sandstone and Victorian tile can be damaged by full pressure, so those are soft-washed and take longer.
- Water and drainage come from the property unless we agree otherwise. If there is no outside tap or the drains cannot take run-off, tell us at quote stage and we plan for it.
- Re-sanding matters. Washing block paving without re-brushing kiln-dried sand into the joints invites weeds straight back and lets the blocks move.
Reviews for Jet Washing across the UK
4.5 ★ from 3,131 Trustpilot reviewsSardar gave me a great spring clean and the patio clean with professional chemicals. It was fast and reliable service. Will definitely do it again!
Sardar jet washed my front and back patios. He did a great job, was on time, and communicated well. He checked that I was happy with the work and was very neat and tidy while working and afterwards.
Tenancy cleaning has an extensive list of cleaning offered, even jet washing. Adriana team service was very good and we were very happy with our end of tenancy clean. Would definitely recommend.
Read all 7 Jet Washing reviews →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.
Where we cover around Old Windsor
- Old Windsor villageSL4
- WraysburyTW19
- Straight RoadSL4
- Runnymede edgeSL4
- Ham IslandSL4
- Crimp HillSL4
Jet Washing in nearby towns
Other cleaning services in Old Windsor
Recent jobs near you
Real jobs our crews have completed nearby, with the price the customer actually paid. Published with their permission.
End OF Tenancy Cleaning
Slough
August 2026
One end of tenancy cleaning job completed in Slough in August 2026.
£284
Carpet Cleaning
Maidenhead
August 2026
One carpet & rug cleaning job completed in Maidenhead in August 2026.
Deep Cleaning
Caversham
August 2026
One deep cleaning job completed in Caversham in August 2026.
£230
Old Windsor questions, answered.
How quickly can you book jet washing in Old Windsor?
Same-week slots are standard in Old Windsor, with next-day often available midweek. Month-end tenancy changeovers are the busiest window across Berkshire, so book those a week or two ahead.
Will jet washing damage my paving?
Not at the right pressure for the surface, which is why we test first. Full pressure on soft stone, loose-jointed slabs or lime mortar does cause damage, so those get a low-pressure soft wash instead — a technique change, not an upsell.
Do you re-sand block paving afterwards?
Yes, where the joints have been washed out. Kiln-dried sand is brushed back in as part of the job, because paving left with open joints loses stability and grows weeds again within weeks.
Do you seal the surface as well?
Sealing is a separate decision and needs a properly dry surface, so it is never done on the same visit as the wash. We will tell you honestly whether your surface would benefit rather than adding it by default.