Crew sized to the job
One fitter up to 43 inches, two for anything larger or where the screen has to go up a stairwell. Private-estate gates and codes, long gravel drives and narrow park-edge lanes.
Kingston upon Thames · KT2 · TV mounting
Same-week slots · Fully insured · Local Kingston Vale and Coombe fitters · Fixed written pricesTV mounting in Kingston Vale and Coombe KT2, Kingston upon Thames, from £75. Private estates of large houses on the slope below Richmond Park's Robin Hood Gate, which is why our KT2 quotes account for private-estate gates and codes, long gravel drives and narrow park-edge lanes. You get a fixed price in writing, an insured fitter and a tidy finish.


Overview
Booked mostly by owner-occupier-led households around Norbiton, TV mounting here covers supply-free fitting from £75. With 12% of Kingston Vale and Coombe's 2,354 homes in flats, lift access and stair carries in KT2 shape the slot length we hold.
How it works
Step 1
Detector sweep for cables and pipes, then a substrate test so the fixing matches the wall rather than the other way round.
Step 2
We set the centre of the screen to seated eye level and mark it before drilling anything.
Step 3
Anchors chosen for the wall type and torqued, with a load check before the screen goes anywhere near it.
Step 4
Two-person lift on anything over 43 inches, then levelled and the tilt set.
Step 5
Cables trunked, sleeved or chased if quoted, inputs tested and the packaging taken away.
Why choose us
One fitter up to 43 inches, two for anything larger or where the screen has to go up a stairwell. Private-estate gates and codes, long gravel drives and narrow park-edge lanes.
Most borough slots are available within 48 hours, with evening appointments after 6pm on weekdays. Norbiton (South Western) is the nearest station, so a KT2 visit rarely needs a whole morning set aside.
We expect solid London stock brick; locally that also means some of it dry-lined during a later refurbishment — and with 20% of homes here privately rented, it sets the booking date as often as the job does in KT2, and we carry the anchors, through-fixings and long bits that match. The mistake we spend most time undoing here is fixings landing in soft lime mortar joints instead of the brick body on these streets — the pattern behind 2,354 households inside the KT2 neighbourhood.
Work is covered by £5m public liability insurance and we photograph the fixing before the screen goes on, which is what most London leases and letting agents ask for.
Fixed prices
| Job | From | Typical time | What sets the price |
|---|---|---|---|
| Up to 42" on a solid wall | £75 | 45–60 min | Brick or block takes a straightforward fixing; the time is levelling and cable dressing. |
| 43"–65" on a solid wall | £95 | 1–1.5 hrs | Two-person lift and a heavier bracket with resin or sleeve anchors rated for the screen. |
| 66"+ or a full-motion arm | £140 | 1.5–2 hrs | Cantilever arms multiply the pull-out load, so the fixing pattern and substrate check take longer. |
| Dot-and-dab or stud wall | £120 | 1.5–2 hrs | The plasterboard carries nothing: we locate studs or fit through-fixings to the masonry behind the void. |
| Cables chased into the wall | £90 | +1–2 hrs | Chasing, back boxes and making good is a separate trade task from hanging the screen. |
| Soundbar, shelf or console added | £35 | +20–30 min | A second fixing line that has to sit level with the screen and hide its own cabling. |
Up to 42" on a solid wall
£75 · 45–60 min
Brick or block takes a straightforward fixing; the time is levelling and cable dressing.
43"–65" on a solid wall
£95 · 1–1.5 hrs
Two-person lift and a heavier bracket with resin or sleeve anchors rated for the screen.
66"+ or a full-motion arm
£140 · 1.5–2 hrs
Cantilever arms multiply the pull-out load, so the fixing pattern and substrate check take longer.
Dot-and-dab or stud wall
£120 · 1.5–2 hrs
The plasterboard carries nothing: we locate studs or fit through-fixings to the masonry behind the void.
Cables chased into the wall
£90 · +1–2 hrs
Chasing, back boxes and making good is a separate trade task from hanging the screen.
Soundbar, shelf or console added
£35 · +20–30 min
A second fixing line that has to sit level with the screen and hide its own cabling.
Prices include the fixings and a straight cable tidy. Brackets can be supplied at cost or you can provide your own. Where a permit or a loading-bay suspension is needed for the van it is itemised in the quote, and Congestion Charge or ULEZ, where they apply, are shown as separate lines rather than folded into the labour rate.
Scope
Sulltan is the best handyman in London. He is very reliable and professional. I highly recommend.
I booked online last minute, as I needed a handyman urgently for the next day. When I called Hello Services, I spoke to Michelle and she was extremely helpful and arranged everything within 15 mins. Adam the handy man then came to fix my wardrobe sliding door, which were jammed and came off the ledge… Read in full →
Sulltan is the best handyman in London , Highly recommend ......
Read all 29 TV mounting reviews →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.
Coverage
Also in this area
Wardrobes, beds, desks and storage built, levelled and anchored to the wall.
Floating and bracketed shelving into plaster, brick, stud and dot-and-dab.
Blinds, poles and bay tracks measured, levelled and fixed to the reveal you have.
Anything that needs to go on a wall — fixed into the right substrate and levelled.
Working in Kingston Vale and Coombe
The KT2 stock around Richmond Park's Robin Hood Gate is post-war. ONS records 12% flats, 88% houses and 2,354 households in Kingston Vale and Coombe.
20% of households rent privately and 77% own, which is why TV mounting demand here peaks around tenancy changeovers and completion dates.
Walls are solid London stock brick; locally that also means some of it dry-lined during a later refurbishment — and with 20% of homes here privately rented, it sets the booking date as often as the job does, so the fixing that matters in Kingston Vale and Coombe is chosen on site — the usual failure here is fixings landing in soft lime mortar joints instead of the brick body on these streets — the pattern behind 2,354 households inside the KT2 neighbourhood.
Anyone who knows Kingston Vale and Coombe knows the pattern near Richmond Park's Robin Hood Gate: private estates of large houses on the slope below Richmond Park's Robin Hood Gate. We plan the KT2 visit around it. Kingston Vale and Coombe is outside the Congestion Charge zone but inside ULEZ; our vehicles are compliant, so nothing is added for it.
Private-estate gates and codes, long gravel drives and narrow park-edge lanes. Nearest station is Norbiton (South Western), and one fitter up to 43 inches, two for anything larger or where the screen has to go up a stairwell.
Area at a glance
Who lives in Kingston Vale and Coombe and what they live in decides how tv mounting is quoted and how long a visit takes. These are the published Census 2021 figures for the Kingston Vale & Coombe Hill neighbourhood itself — not Kingston upon Thames-wide averages, and not estimates.
7,008
Residents
Kingston Vale & Coombe Hill neighbourhood, Census 2021
2,354
Households
Median age 44.8
Flats vs houses
Residents by sex
Single-person households
18.5%
Privately rented
19.6%
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhood Kingston Vale & Coombe Hill (E02000599) — the published geography that covers Kingston Vale and Coombe, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL). Coordinates for the KT2 district: 51.4190, -0.2904 — Outward postcode centroid, postcodes.io (Ordnance Survey Open Data).
Up to 42" on a solid wall starts at £75 in Kingston Vale and Coombe on the streets near Richmond Park's Robin Hood Gate, with 2,354 households on this patch — and 88% of Kingston Vale and Coombe homes being houses, and every job is quoted as a fixed written price before a fitter is booked. Screen size and wall type set the price. Dot-and-dab, stud and thin modern partitions cost more than brick because the fixing has to reach something structural on this side of Kingston upon Thames, with Kingston upon Thames parking rules in play.
Yes. In Kingston Vale and Coombe the walls we usually meet are solid London stock brick; locally that also means some of it dry-lined during a later refurbishment — and with 20% of homes here privately rented, it sets the booking date as often as the job does on this side of Kingston upon Thames — and 3% social-rented stock nearby, with this being a short walk from Norbiton (South Western), so we locate the studs or use through-fixings into the masonry behind the board. The plasterboard itself never carries the screen, whatever the bracket packaging claims on KT2 jobs.
A screen up to 42 inches on a solid wall in KT2 takes 45–60 minutes in Kingston Vale and Coombe. A 43–65 inch screen takes an hour to 90 minutes on Kingston upon Thames bookings — and 3% social-rented stock nearby, with this being a short walk from Norbiton (South Western), and a full-motion arm or a dot-and-dab wall pushes it to two hours because the fixing pattern has to reach something structural.
We do, quoted separately from £90 — chasing, back boxes and making good is a different task from hanging the screen across KT2, with Kingston upon Thames parking rules in play. In leasehold flats across Kingston Vale and Coombe we check the lease first; many Royal Borough of Kingston upon Thames blocks require consent before a wall is cut on this side of Kingston upon Thames — and 77% owner-occupation locally, with 12% of homes here being flats.
All three. With 20% of Kingston Vale and Coombe privately rented and 77% owner-occupied, roughly half the KT2 diary is agent- or landlord-instructed and invoiced separately from the person at the door for Kingston Vale and Coombe (KT2) addresses — and 2,354 households on this patch, with this being Royal Borough of Kingston upon Thames territory.
Richmond Park's Robin Hood Gate is the marker we route to on the Kingston Vale and Coombe rounds, with this being Royal Borough of Kingston upon Thames territory, and private-estate gates and codes, long gravel drives and narrow park-edge lanes. A KT2 slot added to an existing Kingston upon Thames round usually lands the same week rather than the next for Kingston Vale and Coombe (KT2) addresses, with a median age of 45 in this neighbourhood.
Most borough slots are available within 48 hours on the Kingston Vale and Coombe rounds, with evening appointments after 6pm on weekdays. Kingston Vale and Coombe sits close to Norbiton (South Western) on Kingston upon Thames bookings, with 2,354 households on this patch — and 20% of KT2 homes being privately rented, so we can usually add a KT2 job to an existing Kingston upon Thames round at short notice.
Read next
Handyman
Hourly rates, half-day jobs and the questions worth asking before booking.
Assembly
Which builds are a two-hour job and which reliably eat a weekend.
Assembly
Wardrobes, beds and kitchen units built and levelled the same day.
Free quote · 1-hour reply
Two ways to go: price it yourself on the quote page, or pick a slot on the live booking calendar. Kingston Vale and Coombe KT2 jobs are confirmed in writing before anyone travels, and the same crew covers the rest of kingston upon thames.
No deposit is taken until the price and slot are confirmed in writing.