Richmond upon Thames · TW10 · Shelf installation
Shelf installation in Richmond Hill and Ham, TW10
Shelf installation in Richmond Hill and Ham, TW10: we price per shelf, scan every wall before drilling, and finish with every fixing landed in brick, the run loaded in front of you and the safe working load written on the job sheet. Extremely steep hill, narrow riverside lanes at Ham and conservation-area limits.
- Trustpilot 4.5· 3,100+ reviews
- Google 3.9· 1,429 reviews
- £1m public liability
- Licensed waste carrier CBDU300454
- Since 2019
- From £45 a shelf, fixed in writing before we arrive
- Most booked here: playroom and home-office shelf runs
- Kerbside or driveway unloading, then a straight stair with a turn at the top
- London Borough of Richmond upon Thames permits, ULEZ and packaging removal already inside the price
The service, locally
Shelving we fit in Richmond Hill and Ham homes
We detect cables and pipes, choose the fixing for the wall we actually find, then load the finished run in front of you and write the safe working load on the job sheet.
Same-day and evening slots exist for a reason — the shelves arrive, the boxes are in the hallway and the flat is unusable. Tell us the window and we book the TW10 slot behind it for £35.
- From, per shelf built
- £45From, per shelf built
- Richmond Hill and Ham homes are flats
- 35%Richmond Hill and Ham homes are flats
- Shelf types priced
- 16Shelf types priced
- Households in Richmond Hill and Ham
- 2,156Households in Richmond Hill and Ham
Instant estimate
Price your Richmond Hill and Ham shelf build
How it works
How a Richmond Hill and Ham shelf assembly visit works
- Photo of the Richmond Hill and Ham wallSend a photo of the wall and the shelves. We price each shelf from the published TW10 list, name the fixing the wall needs, and confirm one written figure.
- Permit, parking and carry agreedExtremely steep hill, narrow riverside lanes at Ham and conservation-area limits. That decides the van, the slot length and whether London Borough of Richmond upon Thames needs a bay suspending — all handled at our end.
- Scanned, fixed and load-testedMarked up in pencil and agreed with you, scanned, drilled on extraction into solid brick or block, then every fixing landed in brick, the run loaded in front of you and the safe working load written on the job sheet.
- Get my price
Walls and fixings
What we are usually building in Richmond Hill and Ham
Most likely here
family houses with brick-and-block internal walls, boarded lofts and garages doing storage duty
- Most-booked shelving
- playroom and home-office shelf runs, garage racking bays and anti-tip anchoring on furniture children climb
- Set-out constraint
- a room that has to hold books, toys and a printer without the shelf line fighting the picture rail
- Getting the boards in
- kerbside or driveway unloading, then a straight stair with a turn at the top
- The check that closes the visit
- every fixing landed in brick, the run loaded in front of you and the safe working load written on the job sheet
Homes in Richmond upon Thames average 2.79 bedrooms and 33% of households have dependent children, so playroom and home-office shelf runs, garage racking bays and anti-tip anchoring on furniture children climb is the order we quote most here.
15% of homes around TW10 are privately rented, so a large share of Richmond Hill and Ham bookings are shelving that has to go up without damaging a deposit — and come down cleanly at the end.
The stock here is family houses with brick-and-block internal walls, boarded lofts and garages doing storage duty, and the constraint we set out around is a room that has to hold books, toys and a printer without the shelf line fighting the picture rail.
We carry plasterboard anchors, Corefix and Geefix through-fixings, resin capsules, frame fixings, toggles and long masonry bits, so the wall we find is the wall we can fix into. The fixings you actually need are itemised on the quote rather than sold as an unexplained extra.
Hello Services is an independent installation company. We are not affiliated with, endorsed by or connected to IKEA, String, Vitsœ, B&Q or any other shelving brand. Brand and range names are used only to describe the shelves we fit.
Per-shelf prices
Shelf installation prices in Richmond Hill and Ham
| Shelf | From | To | Fitting time | What it covers |
|---|---|---|---|---|
| Floating shelves, set of threeLoad-tested, safe working load stated | £95 | £155 | 1 hr 30 mins | Spacing set out from the room, not the box, so the gaps read even against the skirting and cornice |
| Heavy-duty shelf (books, records, tools)Load-tested, safe working load stated | £75 | £130 | 1 hr | Through-fixed or resin-anchored to a stated safe working load, then loaded in front of you |
| Garage or utility racking bayLoad-tested, safe working load stated | £95 | £180 | 2 hrs | Bays plumbed to a wall that leans, feet packed, upper bays tied back so nothing walks under load |
| Flat-pack shelving unit built and anchoredLoad-tested, safe working load stated | £55 | £100 | 55 mins | Built square, backboard pinned properly, then anti-tip anchored into the wall behind it |
| Anti-tip anchoring, existing bookcaseLoad-tested, safe working load stated | £35 | £55 | 25 mins | Restraint straps or brackets fixed into structure — the five-minute job that stops a tipping accident |
| Loft storage shelving over the joistsLoad-tested, safe working load stated | £130 | £240 | 2 hrs 45 mins | Raised off the insulation on stilts so the loft keeps its U-value and the boxes stay off plasterboard |
| Picture ledge or narrow display shelf | £38 | £60 | 30 mins | Fixed to a marked-up line so a row of frames sits square to the ceiling rather than the floor |
| Glass shelf, bathroom or display | £45 | £80 | 35 mins | Tile-safe drilling on slow speed, holes sealed, brackets bedded so nothing weeps behind the tile |
Richmond Hill and Ham TW10 leads with these 8 rows because the local walls produce the same order again and again: playroom and home-office shelf runs, garage racking bays and anti-tip anchoring on furniture children climb. The rest of the 16-item list is priced identically.
£45 minimum per visit. Prices include VAT, the van, the fixings, dust control and taking the packaging away. Nothing is added on the day without your written agreement first. Load ratings are quoted per pair of fixings, in shear, on the substrate we actually found — not the maker's laboratory figure. Books, tools and a full record collection are the loads we design for.
Why Hello Services
Why book shelf assembly in Richmond Hill and Ham with us
Level to the room, not the ceiling
Laser set-out against the skirting, window head and the run beside it on this side of Richmond upon Thames, with Richmond upon Thames parking rules in play, because that is what the eye in a Richmond Hill and Ham room actually compares it to.
Old shelving out, holes gone
Take-down, plugs pulled, filled twice and sanded flush in the same visit, instead of a wall of craters waiting for a decorator across TW10, with this being London Borough of Richmond upon Thames territory.
Permits and access handled
For TW10 bookings, london Borough of Richmond upon Thames permits, bay suspensions, concierge sign-in and goods-lift booking are arranged and paid for by us on the streets near Ham House and the Richmond Hill view, with 2,156 households on this patch. Around Richmond (District, Overground, South Western), at the foot of the hill we allow for the parking and the walk-in before the slot is confirmed.
The local fault, avoided
Brackets fixed into the perpend joints rather than the brick itself across TW10 — and this being London Borough of Richmond upon Thames territory, with Richmond upon Thames parking rules in play, which is why a loaded shelf slowly nods forward — which is exactly what our final check is for.
Rates and local costs
Fixed per shelf, or hourly, in Richmond Hill and Ham
One shelf, fixed price
£45
from, per shelf
Hourly rate
£55
per hour, one-hour minimum
Old shelving removed
£40
per run
Full alcove day rate
£320
per fitter, per day
- Parking and permits
- London Borough of Richmond upon Thames visitor permits and bay suspensions are arranged and paid for by us, so timber, brackets and the dust extractor are carried in once. Extremely steep hill, narrow riverside lanes at Ham and conservation-area limits.
- Charging zones
- Richmond upon Thames sits outside the Congestion Charge zone and inside ULEZ. Our vans are ULEZ compliant and neither charge ever appears on a TW10 invoice.
- What the wall is made of
- 35% of homes around Richmond Hill and Ham are flats, so dot-and-dab, concrete panel and lath-and-plaster are common here — through-fixings are quoted from your photos before the slot, never discovered on the day.
Every wall is sounded and scanned for cables and pipes before a bit goes anywhere near it. Where a shelf lands on plasterboard we fix into the studs or use rated cavity anchors, never a plastic rawl plug taking a bookcase's worth of weight.
Scope
What is included in Richmond Hill and Ham
Included in every visit
- Marking up against the Richmond Hill and Ham room itself — skirting, window head and the run beside it — then a laser check before the first hole
- A scan of every TW10 wall for live cables and pipework, and fixings chosen for the substrate we actually find: frame fixings or resin anchors into brick rather than perpend joints
- Drilling on dust extraction, dust sheets down, and the room vacuumed before we leave
- Weight put on each TW10 shelf while you watch, then the tested safe working load written down for you
Not included — and why
- Buying the boards or brackets for you; we install your own and flag it in advance if the hardware will not carry what you plan to put on it
- Structural alterations: cutting into studs, moving a lintel or forming a new opening belongs to a builder
- Wall finishes: we fill and sand the holes flush, but any redecoration afterwards is priced separately
- Electrical work behind a media wall beyond routing existing cables, which belongs to a registered electrician
Coverage
Shelf assembly around Richmond Hill and Ham
Nearby areas we also cover
- Shelf installation in TwickenhamTW1TW1
- Shelf installation in St MargaretsTW1TW1
- Shelf installation in RichmondTW9TW9
- Shelf installation in KewTW9TW9
- Shelf installation in TeddingtonTW11TW11
- Shelf installation in Hampton WickTW11TW11
- Shelf installation in Mortlake and East SheenSW14SW14
- Shelf installation in Kingston Vale and CoombeKT2 · Kingston upon ThamesKT2
Guides
Read before you book
How long does shelf installation take?
Honest fitting times per shelf type, and the four things that turn an hour into an afternoon.
12 min read
How much weight can a shelf hold?
What each wall type really holds, which fixing gets you there, and how to load a shelf without pulling it off.
13 min read
Alcove shelving in London homes: a practical guide
Why no alcove is square, how the boards are scribed, and what a proper alcove set costs and takes.
14 min read
Working out a slot for Richmond Hill and Ham? Start with how long shelf installation takes, check how much weight a shelf can hold before you load a run, and read the alcove shelving guide if a chimney breast is where the storage has to go.
Wider coverage: Richmond upon Thames shelf assembly · shelf assembly across London · shelf assembly prices and what is included
Related services
Other work we do in Richmond Hill and Ham
Flat-pack assembly in Richmond Hill and Ham
Billy bookcases and Kallax units built square and anchored on the same visit as the shelves.
Bed assembly in Richmond Hill and Ham
Frames, ottomans and bunks built in the room while the bedroom shelving goes up.
Handyman in Richmond Hill and Ham
TV brackets, blinds, mirrors and the rest of the TW10 wall-fixing snag list.
Old shelving and furniture removed
Stripped-out shelving and cabinets taken away under our waste carrier licence.
About the area
Richmond Hill and Ham in context
Richmond Hill and Ham in Richmond upon Thames, by Ham House and the Richmond Hill view and Richmond (District, Overground, South Western), at the foot of the hill. 2,156 households, 35% flats, 15% privately rented; walls typically solid brick or block.
Where Richmond Hill and Ham sits in our coverage
Richmond Hill and Ham sits inside the coverage published on our shelf assembly in Richmond upon Thames page, which sits under shelf assembly across London. Nearest pages to this one, in travel order: shelf assembly in Twickenham TW1 (1.0 miles), shelf assembly in Richmond TW9 (1.6 miles), shelf assembly in Teddington TW11 (1.9 miles), shelf assembly in Mortlake and East Sheen SW14 (2.0 miles) and shelf assembly in Kingston Vale and Coombe KT2 (2.1 miles). If your address sits on the boundary, book the closest page — the price and the crew are the same. For every trade we run at this postcode, see all services in Richmond Hill and Ham TW10.
Most booked alongside this in Richmond Hill and Ham TW10
Richmond Hill and Ham TW10 at a glance
- 2,156
- Households
- 35%
- Homes that are flats
- 15%
- Privately rented
- 5,411
- Residents
- 41.8
- Median age
- 2.8
- Average bedrooms
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhood Ham (E02000800) — the published geography that covers Richmond Hill and Ham, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL).
Questions
Richmond Hill and Ham TW10 shelf assembly questions
Richmond Hill and Ham prices are per shelf and agreed in writing: from £45 for one floating shelf, £95 for a set of three, £190 for an alcove pair, £75 for heavy-duty racking and £35 to anchor a bookcase on TW10 jobs — and this being London Borough of Richmond upon Thames territory, with 26% social-rented stock nearby. Mixed lists can go hourly at £55.
A single floating shelf takes about forty minutes including set-out and load testing across TW10. A set of three is around ninety minutes, an alcove pair three and a half hours on the streets near Ham House and the Richmond Hill view, with Ham House and the Richmond Hill view a few streets away, and a full-height chimney-breast pair most of a day. Several shelves in one TW10 visit are quicker per shelf than separate call-outs on TW10 jobs.
It depends on the wall, not the shelf. Around Richmond Hill and Ham we usually find solid brick or block in this 35% flats neighbourhood, with 26% social-rented stock nearby — and 58% owner-occupation locally, which gives 40kg+ a pair of fixings, the strongest wall most london homes have. We state the safe working load in writing when the run is finished around Richmond (District, Overground, South Western), at the foot of the hill, with 65% of Richmond Hill and Ham homes being houses — and Richmond upon Thames parking rules in play, and we load it in front of you rather than asking you to trust the packaging.
Solid brick or block. Frame fixings or resin anchors into brick rather than perpend joints Brackets fixed into the perpend joints rather than the brick itself across TW10, with this being a short walk from Richmond (District, Overground, South Western), at the foot of the hill — and a median age of 42 in this neighbourhood, which is why a loaded shelf slowly nods forward — which is exactly what our set-out and fixing choice is designed to avoid.
No. Sheets cover the floor and furniture, the drill is on extraction in this 35% flats neighbourhood, with a median age of 42 in this neighbourhood, and we hoover skirting and carpet before we pack up. Solid brick or block in particular is drilled slowly so the debris lifts out instead of blowing across the room around Richmond (District, Overground, South Western), at the foot of the hill, with Richmond upon Thames parking rules in play.
Yes, and in the same visit. The old run comes off, the plugs come out, the holes are filled in two passes and sanded flush ready for paint on the streets near Ham House and the Richmond Hill view, with 65% of Richmond Hill and Ham homes being houses. The scrap leaves with us under our waste carrier licence on TW10 jobs.
More shelf installation questions answered on the London hub
Source: ONS Census 2021, borough totals via Nomis (table TS008, TS041, TS007A, TS044, TS054, TS003). Figures describe the whole borough, the smallest area ONS publishes every one of these tables for.
Book shelf assembly in Richmond Hill and Ham TW10
Send the shelf model or a photo of the boxes for a fixed written price the same working day. The carry, permits and taking the packaging away are already in the figure.
Reviews for shelf installation across the UK
4.5 ★ from 3,131 Trustpilot reviewsSulltan is the best handyman in London. He is very reliable and professional. I highly recommend.
I have contacted Handy Man at the beginning of December to help me with moving from one house to another. I needed someone to dismantle and reassemble my furniture in the new house. Handy man provided me with an excellent service. Avin was so understanding of my situation and worked around my schedule to ensure… Read in full →
I booked the services for putting together some new bedroom furniture. This was agreed for 3 pm. I got a call at 3pm to say they were going to be late and be there at 5, they arrived at 5:30. The workmanship and the guys who fitted it was excellent and they were very friendly… Read in full →
Read all 48 shelf installation reviews →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.