Skip to main content
Hello Services logoHello Services

London shed assembly · West London

Shed assembly in Richmond upon Thames

We work in Richmond upon Thames every week — the only borough on both banks — richmond park and hill, twickenham rugby, kew gardens and riverside barnes. Shed assembly is priced against that reality, not a national average.

SW13SW14SW15TW1TW10TW11TW12TW2
  • 9 outward codes covered, 11 named areas
  • ULEZ-compliant vans, no travel surcharge
  • Most builds are booked within a week, longer in spring when garden project demand peaks across London.
  • Fitters carry £5m public liability cover.
Shed assembly in Richmond upon Thames, Richmond upon Thames
Shed assembly in Richmond upon Thames — photographed on a Hello Services job.
Hello Services handyman fixing a shelf level to a customer wall — Hello Services team working in Richmond upon Thames
Hello Services crews work across Richmond upon Thames every week.
Areas covered
11Areas covered
Outward codes
9Outward codes
Residents
195kResidents
From
£140From

Fixed prices

Shed assembly prices in Richmond upon Thames

What a shed build costs in Richmond upon Thames. Shed size and whether the base already exists. A slab or bearer base adds a separate charge but saves the shed floor from sitting on wet grass or bare soil through its first winter. The borough-specific additions here come from ULEZ, controlled parking zones and stair access.
Shed assembly price guide for Richmond upon Thames
JobFromTypical timeWhat sets the price
Small shed up to 6x4ft, base ready£1402–3 hrsA one-piece or simple panel shed on an existing slab, framed, roofed and felted in a morning.
Medium shed 8x6ft, base ready£2203–5 hrsMore panels and a ridged roof mean more bracing before the structure is rigid enough to felt.
Large shed or workshop 10x8ft+, base ready£3205–7 hrsHeavier framing, often double doors and a window, and usually a two-person lift for the roof panels.
Paving-slab base, per m²£45By areaCompacted hardcore and a sand bed under the slabs, laid to a slight fall so water runs away from the shed floor.
Timber bearer base on an existing hard surface£852–3 hrsPressure-treated bearers levelled and packed to keep the shed floor off standing water without a full slab.
Anchor kit for an exposed or elevated garden£6045–60 minGround anchors or wall straps fitted so the shed does not lift in a gust funnelled between two terraces.

Prices are labour to build the kit you supply, on a base that is level and ready. Roofing felt, fixings and standard anchor kits are included; a bespoke concrete base is quoted separately by the m². We flag before booking where a build looks close to the 2.5m eaves height or 50%-of-garden permitted development limits so you can check before ordering. Permits, ULEZ and the Congestion Charge where they apply are itemised.

Working in Richmond upon Thames

Why Richmond upon Thames is not a generic London job

Kew Gardens and Richmond Park is the landmark; the working detail below is what actually changes the price and the method in Richmond upon Thames.

The housing stock

What our crews walk into in Richmond upon Thames is georgian and victorian villas, edwardian terraces, mansion flats and riverside conversions, and the mix changes street by street — Barnes (SW13), Hampton and Hampton Hill (TW12) and Hampton Wick (TW11) each behave differently on the day.

Access, parking and permits

On the ground, conservation-area streets with narrow entrances, flood-zone riverside loading limits and strict cpzs in richmond and twickenham. Locally that means narrow village lanes, conservation-area limits and boat race day closures and riverside lanes are narrow and flood-prone; driveways elsewhere. Richmond upon Thames sits outside the Congestion Charge zone, so only ULEZ applies to the van and the quote is that much simpler.

London Borough of Richmond upon Thames rules

Leases across Richmond upon Thames restrict drilling into party and structural walls. We check what the wall actually is before we start, and where consent is needed we say so rather than fixing anyway.

How the borough got this way

Royal palaces at Richmond and Hampton Court set the tone; Georgian and Victorian villas followed the river and the railway. That history is why Richmond upon Thames property behaves the way it does today.

Scope

What's included in Richmond upon Thames

The same scope everywhere in the borough, whether the job is in Barnes or Whitton.

Included in the price

  • Kit checked against the manual and the panel list before the first screw goes in
  • Frame squared and braced before roof panels go on, so doors don't bind later
  • Felt or shingle roofing lapped and nailed to the manufacturer's pattern
  • Anchoring or ground pins fitted as standard in exposed gardens

Not included

  • Laying a full concrete slab base — quoted separately as a groundworks job
  • Electrical supply to the shed, which needs a registered electrician for the armoured cable and consumer unit work
  • Party wall or boundary consent where a shed sits within 2m of a neighbour's fence and exceeds the height limit

Method

How a Richmond upon Thames booking runs

Five steps, the same on every Richmond upon Thames job, so you know what happens before you commit.
  1. Step 1

    Check the base and the plot

    Base checked for level and size, and the shed's height and position checked against the garden's remaining permitted development allowance.

  2. Step 2

    Unpack and count

    Panels, roof struts and fixings checked against the parts list — a shed with a bent panel or a short bag of screws is found before the frame goes up, not halfway through.

  3. Step 3

    Frame and square

    Floor and wall panels built up and squared before the roof goes on, since an out-of-square frame is what makes doors stick.

  4. Step 4

    Roof and weatherproof

    Roof panels fitted, felt or shingle lapped correctly and any window or vent sealed.

  5. Step 5

    Anchor and finish

    Ground anchors or wall straps fitted in exposed gardens, doors hung and eased, packaging taken away.

Coverage

Every area we cover in Richmond upon Thames

11 named areas across SW13, SW14, SW15, TW1, TW10, TW11, TW12 and TW2. Each has its own page with local access notes.
Local questions

Shed assembly in Richmond upon Thames — your questions

  • How much does a shed build cost in Richmond upon Thames?

    Small shed up to 6x4ft, base ready starts at £140 in Richmond upon Thames, and the ladder runs up to £60 for the largest job on the table above. Shed size and whether the base already exists. A slab or bearer base adds a separate charge but saves the shed floor from sitting on wet grass or bare soil through its first winter. The borough is outside the Congestion Charge zone, so there is no charge to pass on — only ULEZ, which our vans are compliant with.

  • Which Richmond upon Thames postcodes do you cover?

    We cover the whole borough: SW13, SW14, SW15, TW1, TW10, TW11, TW12, TW2 and TW9. On the ground that includes Barnes, Hampton and Hampton Hill, Hampton Wick, Kew, Mortlake and East Sheen and Richmond.

  • How quickly can you get to Richmond upon Thames?

    Most builds are booked within a week, longer in spring when garden project demand peaks across London. West London is covered by crews already working in the borough, so travel time is not billed on top.

  • What about parking and permits in Richmond upon Thames?

    Conservation-area streets with narrow entrances, flood-zone riverside loading limits and strict CPZs in Richmond and Twickenham. Where a permit or a bay suspension is needed we arrange it with London Borough of Richmond upon Thames and show the cost in the quote before you agree it. Nothing is added afterwards.

  • Do you work in Richmond upon Thames flats and blocks with no lift?

    Yes. Georgian and Victorian villas, Edwardian terraces, mansion flats and riverside conversions is exactly the stock we work in daily. Where there is no lift, the crew size is set by the floor level at quote stage, so a third-floor walk-up is priced as a third-floor walk-up rather than re-quoted on the doorstep.

  • Are you insured and licensed for work in Richmond upon Thames?

    Fitters carry £5m public liability cover. Most garden sheds fall under permitted development if they sit under 2.5m at the eaves within 2m of a boundary and the total of all outbuildings stays under 50% of the garden — we flag it if a build looks close to either limit rather than assume it is fine. Certificates go out with the booking confirmation, which is what London Borough of Richmond upon Thames tenancies and most local managing agents ask for.

  • Who turns up, and with what?

    One fitter for a small shed on a ready base; two for anything over 8x6ft or where roof panels need lifting together. Vehicles are ULEZ-compliant, which matters in every Richmond upon Thames postcode, and the crew carries everything needed to complete the job in one visit.

  • What is not included?

    Laying a full concrete slab base — quoted separately as a groundworks job, Electrical supply to the shed, which needs a registered electrician for the armoured cable and consumer unit work and Party wall or boundary consent where a shed sits within 2m of a neighbour's fence and exceeds the height limit. If something on that list turns up in Richmond upon Thames, we tell you at survey and point you at the right trade rather than taking the booking anyway.

Free quote · 1-hour reply

Get a fixed shed assembly price for Richmond upon Thames

Send a few details and you get a written quote for your Richmond upon Thames address, with permits and charges shown separately.

No deposit is taken until the price and slot are confirmed in writing.

Reviews for flat-pack assembly across the UK

4.5 ★ from 3,131 Trustpilot reviews
★★★★★Trustpilot
Sulltan is the best handyman in London. He is very reliable and professional. I highly recommend.
Bu li · · View on Trustpilot
★★★★★Trustpilot
Really pleased with our house move. The guys came on time, loaded everything carefully like a huge jigsaw! Nothing got broken and even though they were working on an hourly rate they were really efficient, not to waste any time. Our only criticism is that we needed a few items disassembled to get on the… Read in full →
Emily · · View on Trustpilot
★★★★★Google
Sulltan is the best handyman in London , Highly recommend ......
Chyve Sta. Ana · View on Google

Read all 48 flat-pack assembly reviews

4.5 out of 5 from 3,131 reviewsCheck on GoogleCheck on Trustpilot

Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.