Central London · Flat-pack assembly
IKEA and flat-pack furniture assembly in Kensington and Chelsea
Furniture assembly in Kensington and Chelsea runs to 11 areas. With 83% of homes in flats, most bookings are wardrobes, storage beds and shelving — and most of them need an anchor chosen for the substrate rather than the one in the box. Some of the tightest CPZs in London, mews entrances under 2.1m and communal-stair-only access in many mansion blocks.
- Trustpilot 4.5· 3,100+ reviews
- Google 3.9· 1,429 reviews
- £1m public liability
- Licensed waste carrier CBDU300454
- Since 2019
- 11 areas covered, each with its own page
- From £35 an item, £190 a half day, £340 a full day
- Anti-tip anchoring, hardware and packaging removal inside every price
- Royal Borough of Kensington and Chelsea permits arranged and paid for by us
- Trustpilot 4.5· 3,100+ reviews
- Google 3.9· 1,429 reviews
- £1m public liability
- Licensed waste carrier CBDU300454
- Since 2019
The service, locally
Furniture assembly across Kensington and Chelsea
Prices are per item and identical in every Kensington and Chelsea postcode. What changes locally is access: the permit, the lift booking and the carry, all arranged and paid for by us before the slot.
- Areas covered
- 11Areas covered
- Homes that are flats
- 83%Homes that are flats
- From, per item
- £35From, per item
- Half-day rate
- £190Half-day rate
How it works
How a Kensington and Chelsea assembly visit works
- Send the list, get a fixed priceSend the item list or a photo of the boxes. We price each unit from the published W2 list and confirm one written figure, including the anchoring your walls need.
- Access sorted for W2We book the Royal Borough of Kensington and Chelsea permit or the bay suspension and, where it applies, so tall wardrobe panels are measured before the van is loaded — and communal stairs with a half-landing turn, measured on the walk in from Bayswater (Circle, District) rather than assumed from a map.
- Built, anchored, packaging goneWe build in the room, level to the floor you actually have, adjust every hinge and runner, anchor with a strap fixed through the plaster into a located timber stud in W2, never into the lime plaster itself, the reality on the streets around Whiteleys and Hyde Park's north edge, and leave with all the packaging.
- Get my price
Scope
What is included in Kensington and Chelsea
Included in every visit
- Every unit on your Bayswater list built, squared and levelled to the floor in the room it belongs in
- Anti-tip anchoring where the item needs it: a strap fixed through the plaster into a located timber stud in W2, never into the lime plaster itself, the reality on the streets around Whiteleys and Hyde Park's north edge
- On W2 jobs: doors, hinges, drawer runners and sliding tracks adjusted so nothing drifts or catches, agreed on the doorstep in Bayswater before anything is unpacked
- In Bayswater: a stud, pipe and cable scan before any fixing goes into a wall, timed against the walk in from Bayswater (Circle, District)
- Royal Borough of Kensington and Chelsea permits or bay suspensions where W2 needs one
Not included — and why
- New electrical circuits, consumer-unit work or anything notifiable under Part P — that belongs to a registered electrician, outside the fixed price on Bayswater bookings
- Gas appliance connection, including hobs and cookers, which is Gas Safe work, quoted separately if you need it arranged in W2
- Plumbing in a sink, tap or integrated appliance as part of a kitchen run (we can book that separately), handled by Royal Borough of Kensington and Chelsea or a specialist contractor instead
- Manufacturer spare parts — missing dowels, cam locks or damaged panels are ordered at cost with the receipt, and we will say so before the W2 visit rather than on the day
- Cutting into a structural wall or altering an opening to make a unit fit, and we will say so before the W2 visit rather than on the day
The complete item list, anchoring matrix and scope policy sit on one page: assembly reference.
Why Hello Services
Why book assembly in Kensington and Chelsea with us
Independent of every retailer
We build any brand's flat-pack, so the advice you get is about your furniture, not a shop's upsell on this side of Kensington and Chelsea, with this being a short walk from Bayswater (Circle, District).
Anchored, not just assembled
Every tall unit in Bayswater is strapped using a strap fixed through the plaster into a located timber stud in W2, never into the lime plaster itself, the reality on the streets around Whiteleys and Hyde Park's north edge — and load-tested before we leave around Bayswater (Circle, District) — and 8,016 households on this patch, with Whiteleys and Hyde Park's north edge a few streets away.
Priced per item, not per hour
Your W2 list is quoted per unit in writing the same working day, with 60% of W2 homes being privately rented, with no doorstep re-quote around Bayswater (Circle, District).
Per-item prices
Flat-pack assembly prices in Kensington and Chelsea
| Item | From | To | Build time | What it covers |
|---|---|---|---|---|
| Modular wardrobe system (per 100cm frame)Anchored to the wall | £120 | £260 | 3 hrs | Frames built, levelled, joined, interiors fitted and the run strapped to the wall |
| Ottoman or drawer storage bed | £85 | £170 | 2 hrs | Gas struts fitted safely, drawers aligned, base tested loaded before we leave |
| Wall-mounted shelf or cabinetAnchored to the wall | £45 | £110 | 50 mins | Substrate checked and scanned, then the anchor that the wall genuinely needs |
Modular wardrobe system (per 100cm frame)
£120 – £260
3 hrs · anchored to the wall
Frames built, levelled, joined, interiors fitted and the run strapped to the wall
Ottoman or drawer storage bed
£85 – £170
2 hrs
Gas struts fitted safely, drawers aligned, base tested loaded before we leave
Wall-mounted shelf or cabinet
£45 – £110
50 mins · anchored to the wall
Substrate checked and scanned, then the anchor that the wall genuinely needs
These are the 8 units booked most often in Kensington and Chelsea, where 83% of homes are flats. All 22 items we price are on the reference page, and the labour rate is the same in every London borough.
£55 minimum per visit. Prices include VAT, the van, all anchoring hardware from our own stock and taking the flattened cardboard and polystyrene away. Nothing is added on the day without your written agreement first. Full item list, anchoring matrix and scope policy.
Instant estimate
Price your Kensington and Chelsea delivery
Estimated for Kensington and Chelsea
From £55
Tick the units in your delivery for a band.
Confirm this in writingPrices include VAT, the van, all anchoring hardware from our own stock and taking the flattened cardboard and polystyrene away. Nothing is added on the day without your written agreement first. Hello Services is an independent furniture assembly company. We are not affiliated with, endorsed by or connected to IKEA or any other flat-pack retailer. Brand and range names are used only to describe the furniture we assemble.
Rates and local costs
Hourly, half day or full day in Kensington and Chelsea
Single item
£55
from, per item
One bookcase, chest of drawers, desk or bed frame built, levelled and anchored.
Hourly rate
£55
per hour, one-hour minimum
Best when the boxes are unlabelled, second-hand or missing their instructions.
Half day
£190
up to 4 hours
The most-booked London slot: a bedroom's worth of boxes in one visit, one price.
- Parking and permits
- Hotel servicing congestion, permit bays and five-storey walk-ups. Royal Borough of Kensington and Chelsea visitor permits and bay suspensions are arranged and paid for by us, so long boxes are carried once, not twice.
- Charging zones
- Part of Kensington and Chelsea sits inside the Congestion Charge zone and all of it is inside ULEZ. Our vans are ULEZ compliant and that cost is never added to a W2 invoice.
- Access and lifts
- 93% of homes around Bayswater are flats, so goods-lift booking and stair carries are planned before the slot rather than discovered on the day.
- Packaging removal
- Flattened cardboard, polystyrene and strapping leave in the van at the end of every W2 visit, at no extra charge.
Wall plugs, through-fixings, resin anchors, hollow-wall anchors and anti-tip straps come out of the van and are inside the price. Replacement dowels, cam locks and manufacturer spare parts are ordered at cost with the receipt attached to your invoice.
Walls and anchoring
What holds an anti-tip strap in Kensington and Chelsea
Most likely here
Victorian and Edwardian conversion flats with original lath-and-plaster partitions on these streets — which is why Royal Borough of Kensington and Chelsea kerb rules get settled before the van is loaded
- Wall construction
- lath and plaster over timber studs in Bayswater, with solid brick on the party walls, and with 46% one-person households in Bayswater, one adult is usually the only pair of hands on site
- The fixing we use
- a strap fixed through the plaster into a located timber stud in W2, never into the lime plaster itself, the reality on the streets around Whiteleys and Hyde Park's north edge
- Access
- so tall wardrobe panels are measured before the van is loaded — and communal stairs with a half-landing turn, measured on the walk in from Bayswater (Circle, District) rather than assumed from a map
46% of Bayswater households are one-person, which is where single-visit builds — one wardrobe, one bed, one desk — outnumber whole-flat days.
Hello Services is an independent furniture assembly company. We are not affiliated with, endorsed by or connected to IKEA or any other flat-pack retailer. Brand and range names are used only to describe the furniture we assemble.
IKEA and flat-pack assembly reviews from Greater London customers
4.5 ★ from 3,131 Trustpilot reviewsI booked the service at 10pm last night was the job was completed by 2pm the next day at very short notice. Adam arrived earlier than expected which was great. He was very friendly and got two IKEA bed side tables and a wardrobe storage unit built in under 2 hours. He also kindly helped… Read in full →
Sulltan is the best handyman in London. He is very reliable and professional. I highly recommend.
Quick assembly of a big gas bbq . Friendly service too
Read all 6 IKEA and flat-pack assembly reviews from Greater London customers →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.
Coverage
Flat-pack assembly around Kensington and Chelsea
Areas we assemble in across Kensington and Chelsea
- Flat-pack assembly in BayswaterW2W2
- Flat-pack assembly in ChelseaSW3SW3
- Flat-pack assembly in Earl's CourtSW5SW5
- Flat-pack assembly in Holland ParkW11, W14W11
- Flat-pack assembly in KensingtonW8W8
- Flat-pack assembly in Ladbroke GroveW10, W11W10
- Flat-pack assembly in North KensingtonW10W10
- Flat-pack assembly in Notting HillW11W11
- Flat-pack assembly in South KensingtonSW7SW7
- Flat-pack assembly in West Brompton and Chelsea HarbourSW10SW10
- Flat-pack assembly in Westbourne ParkW10, W2W10
Neighbouring boroughs
Related services
Other work we do in Kensington and Chelsea
Handyman in Bayswater
Shelves, TV brackets, doors, taps and the rest of the W2 snag list on the same visit.
Man with a van in Bayswater
Collect the flat-pack from the store or a marketplace seller, then build it the same day.
House removals in Bayswater
Furniture dismantled at one end and reassembled at the other, by the same crew.
About the borough
Kensington and Chelsea in context
Bayswater sits in Kensington and Chelsea, a short walk from Whiteleys and Hyde Park's north edge and served by Bayswater (Circle, District). The ONS neighbourhood covering it holds 8,016 households, 93% of them flats — the mix that fills our diary with wardrobe runs and storage beds rather than garden furniture.
Area at a glance
Kensington and Chelsea by the numbers
- Area
- Bayswater, Kensington and Chelsea
- Postcodes served
- W2
- Nearest station
- Bayswater (Circle, District)
- Dominant wall construction
- lath and plaster over timber studs in Bayswater, with solid brick on the party walls, and with 46% one-person households in Bayswater, one adult is usually the only pair of hands on site
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhoods Bayswater East, Queensway (E02000975, E02000976) — the published geography that covers Bayswater, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL).
Questions
Kensington and Chelsea flat-pack assembly questions
Per item and identical in every Kensington and Chelsea postcode: from £35 for a bookcase, £45 a chest of drawers, £55 a bed frame, £75 a hinged wardrobe and £120 per 100cm of a modular wardrobe run. Half day £190, full day £340.
All 11 areas, each with its own page covering the housing stock, the wall construction that comes with it and what a two-metre box has to get through to reach the room. Some of the tightest CPZs in London, mews entrances under 2.1m and communal-stair-only access in many mansion blocks.
Yes, on every item designed to be restrained. We scan for cable and pipe, then use the fixing the wall genuinely needs — a stud screw in lath, a through-fixing on dot-and-dab, resin in soft brick, a screwbolt in concrete — and load-test it before leaving.
Yes. Void turnarounds, furnished-let packs and student handovers are handled with photographs on completion, an itemised invoice per property and one contact for a portfolio. We can attend with keys from the agent.
Where a visitor permit or a bay suspension is needed we arrange and pay for it with Royal Borough of Kensington and Chelsea, and the cost is already inside your quote. Our vans are ULEZ compliant and the Congestion Charge is on us where it applies.
Yes — £1m public liability, DBS-checked fitters, and photographs of every anchored unit on completion. If a fixing we installed fails we come back and put it right.
Source: ONS Census 2021, borough totals via Nomis (table TS008, TS041, TS007A, TS044, TS054, TS003). Figures describe the whole borough, the smallest area ONS publishes every one of these tables for.
Guides
Read before you book
IKEA and flat-pack assembly costs in London: what each item really costs
Per-item prices, the hourly alternative, and the London access costs behind every quote.
9 min read
Anchoring flat-pack furniture safely to a London wall
The anti-tip fixing that holds in each London wall type, and the one that fails.
8 min read
Book flat-pack assembly in Kensington and Chelsea
Send the item list or a photo of the delivery stack for a fixed written price the same working day. Anchoring hardware, permits and taking the packaging away are already in the figure.