Cat flap fitting in Rochdale

Almost always, with the right method. Local walls are dense industrial brick with steel and timber structure behind it, which needs proper masonry bits and a resin cartridge on the van, so the substrate is scanned and tested first and the fixing chosen to suit. A standard Rochdale job takes around 127 minutes.

Access here is typically loading through the residents’ car park with the lift booked, so nothing wide is dragged through a stairwell. Rochdale Borough Council controls parking in OL11, so any permit or visitor bay is arranged before the visit and included in the quoted price — never added afterwards.

Timber or composite door starts at from £79 and through a masonry wall is from £159. The price is set by what the flap is going into — timber, uPVC, glass or a masonry wall and fixed in writing before we travel. Rates are identical across OL11, OL12, OL16 — postcode never changes the figure.

Not into the existing sealed unit — cutting it would destroy it. We order a replacement toughened pane with the hole pre-cut to your flap and swap the unit over. Nothing changes for Rochdale — Rochdale rates are identical.

Yes. We core through the wall, fit a lined tunnel across the cavity, seal both faces and make good, which suits flats and houses where the door cannot be altered. That holds across OL11, OL12, OL16 at one fixed price.

Yes. We pair the flap with your cat's chip, test it and show you how to add another cat or change the lock modes. That holds across OL11, OL12, OL16 at one fixed price.

Most Rochdale homes have heavy solid timber doors, frequently ledged-and-braced or plank doors on original hinges, thick enough to need a longer fixing kit than a standard flap ships with The survey confirms the construction before anything is cut, and the flap, fixing kit and liner are matched to that door rather than to a one-size box.

Not into the existing unit — cutting a sealed double-glazed pane breaks the seal and the glass. Locally, small-pane timber casements and occasional secondary glazing — the glass is rarely the route here because the doors are so substantial Where glass is the only route, we measure the unit and order a replacement toughened pane with the aperture cut at the factory, then fit the flap into the new pane.

Yes. External walls here are typically 500–600mm random stone with rubble fill, so a through-wall fit is core drilled from both faces and takes an extended lined tunnel that has to be made up on site The opening is core drilled, the tunnel lined and sealed at both faces, and the internal and external frames set level so the flap swings freely and stays weathertight.

Large gardens, paddocks and open moorland edge, so the cat is genuinely outdoors and often out at odd hours. On that basis, microchip selective entry is close to essential here — rural areas bring neighbouring cats and the occasional determined visitor in through an unlocked flap. If a flap genuinely is not workable at your property, we will say so on the survey rather than sell you a fitting.