Skip to main content
Hello Services logoHello Services

London shed assembly · Central London

Shed assembly in Kensington and Chelsea

Local shed assembly for Kensington and Chelsea and its 11 covered areas. The densest borough in the country — white stucco crescents, museum quarter and the Portobello and World's End ends.

SW10SW3SW5SW7W10W11W14W2
  • 9 outward codes covered, 11 named areas
  • Congestion Charge and ULEZ itemised, never hidden
  • Most builds are booked within a week, longer in spring when garden project demand peaks across London.
  • Fitters carry £5m public liability cover.
Shed assembly in Kensington and Chelsea, Kensington and Chelsea
Shed assembly in Kensington and Chelsea — photographed on a Hello Services job.
Shed assembly in Kensington and Chelsea, Kensington and Chelsea
Hello Services crews work across Kensington and Chelsea every week.
Areas covered
11Areas covered
Outward codes
9Outward codes
Residents
143kResidents
From
£140From

Fixed prices

Shed assembly prices in Kensington and Chelsea

These are the Kensington and Chelsea floor prices for a shed build. Shed size and whether the base already exists. A slab or bearer base adds a separate charge but saves the shed floor from sitting on wet grass or bare soil through its first winter. In this borough the additional variables are the Congestion Charge, ULEZ and permit-only frontages, and each is quoted separately so you can see it.
Shed assembly price guide for Kensington and Chelsea
JobFromTypical timeWhat sets the price
Small shed up to 6x4ft, base ready£1402–3 hrsA one-piece or simple panel shed on an existing slab, framed, roofed and felted in a morning.
Medium shed 8x6ft, base ready£2203–5 hrsMore panels and a ridged roof mean more bracing before the structure is rigid enough to felt.
Large shed or workshop 10x8ft+, base ready£3205–7 hrsHeavier framing, often double doors and a window, and usually a two-person lift for the roof panels.
Paving-slab base, per m²£45By areaCompacted hardcore and a sand bed under the slabs, laid to a slight fall so water runs away from the shed floor.
Timber bearer base on an existing hard surface£852–3 hrsPressure-treated bearers levelled and packed to keep the shed floor off standing water without a full slab.
Anchor kit for an exposed or elevated garden£6045–60 minGround anchors or wall straps fitted so the shed does not lift in a gust funnelled between two terraces.

Prices are labour to build the kit you supply, on a base that is level and ready. Roofing felt, fixings and standard anchor kits are included; a bespoke concrete base is quoted separately by the m². We flag before booking where a build looks close to the 2.5m eaves height or 50%-of-garden permitted development limits so you can check before ordering. Permits, ULEZ and the Congestion Charge where they apply are itemised.

Working in Kensington and Chelsea

Why Kensington and Chelsea is not a generic London job

The Natural History Museum and Notting Hill's Portobello Road is the landmark; the working detail below is what actually changes the price and the method in Kensington and Chelsea.

The housing stock

What our crews walk into in Kensington and Chelsea is stucco-fronted terraces, mansion flats, mews houses and the lancaster west and world's end estates, and the mix changes street by street — Bayswater (W2), Chelsea (SW3) and Earl's Court (SW5) each behave differently on the day.

Access, parking and permits

On the ground, some of the tightest cpzs in london, mews entrances under 2.1m and communal-stair-only access in many mansion blocks. Locally that means hotel servicing congestion, permit bays and five-storey walk-ups and cadogan estate parking rules, king's road red-route loading and mews arches with height limits. Part of Kensington and Chelsea sits inside the Congestion Charge zone, so the charge is quoted as its own line rather than hidden in the labour rate.

Royal Borough of Kensington and Chelsea rules

Leases across Kensington and Chelsea restrict drilling into party and structural walls. We check what the wall actually is before we start, and where consent is needed we say so rather than fixing anyway.

How the borough got this way

Market gardens turned into the Great Exhibition's Albertopolis, then estate-built stucco terraces for the Victorian wealthy. That history is why Kensington and Chelsea property behaves the way it does today.

Scope

What's included in Kensington and Chelsea

The same scope everywhere in the borough, whether the job is in Bayswater or Westbourne Park.

Included in the price

  • Kit checked against the manual and the panel list before the first screw goes in
  • Frame squared and braced before roof panels go on, so doors don't bind later
  • Felt or shingle roofing lapped and nailed to the manufacturer's pattern
  • Anchoring or ground pins fitted as standard in exposed gardens

Not included

  • Laying a full concrete slab base — quoted separately as a groundworks job
  • Electrical supply to the shed, which needs a registered electrician for the armoured cable and consumer unit work
  • Party wall or boundary consent where a shed sits within 2m of a neighbour's fence and exceeds the height limit

Method

How a Kensington and Chelsea booking runs

Five steps, the same on every Kensington and Chelsea job, so you know what happens before you commit.
  1. Step 1

    Check the base and the plot

    Base checked for level and size, and the shed's height and position checked against the garden's remaining permitted development allowance.

  2. Step 2

    Unpack and count

    Panels, roof struts and fixings checked against the parts list — a shed with a bent panel or a short bag of screws is found before the frame goes up, not halfway through.

  3. Step 3

    Frame and square

    Floor and wall panels built up and squared before the roof goes on, since an out-of-square frame is what makes doors stick.

  4. Step 4

    Roof and weatherproof

    Roof panels fitted, felt or shingle lapped correctly and any window or vent sealed.

  5. Step 5

    Anchor and finish

    Ground anchors or wall straps fitted in exposed gardens, doors hung and eased, packaging taken away.

Coverage

Every area we cover in Kensington and Chelsea

11 named areas across SW10, SW3, SW5, SW7, W10, W11, W14 and W2. Each has its own page with local access notes.
Local questions

Shed assembly in Kensington and Chelsea — your questions

  • How much does a shed build cost in Kensington and Chelsea?

    Small shed up to 6x4ft, base ready starts at £140 in Kensington and Chelsea, and the ladder runs up to £60 for the largest job on the table above. Shed size and whether the base already exists. A slab or bearer base adds a separate charge but saves the shed floor from sitting on wet grass or bare soil through its first winter. Part of the borough is inside the Congestion Charge zone, so a £15 daily charge is added as its own line when the job falls inside the charging hours.

  • Which Kensington and Chelsea postcodes do you cover?

    We cover the whole borough: SW10, SW3, SW5, SW7, W10, W11, W14, W2 and W8. On the ground that includes Bayswater, Chelsea, Earl's Court, Holland Park, Kensington and Ladbroke Grove.

  • How quickly can you get to Kensington and Chelsea?

    Most builds are booked within a week, longer in spring when garden project demand peaks across London. Central London is covered by crews already working in the borough, so travel time is not billed on top.

  • What about parking and permits in Kensington and Chelsea?

    Some of the tightest CPZs in London, mews entrances under 2.1m and communal-stair-only access in many mansion blocks. Where a permit or a bay suspension is needed we arrange it with Royal Borough of Kensington and Chelsea and show the cost in the quote before you agree it. Nothing is added afterwards.

  • Do you work in Kensington and Chelsea flats and blocks with no lift?

    Yes. Stucco-fronted terraces, mansion flats, mews houses and the Lancaster West and World's End estates is exactly the stock we work in daily. Where there is no lift, the crew size is set by the floor level at quote stage, so a third-floor walk-up is priced as a third-floor walk-up rather than re-quoted on the doorstep.

  • Are you insured and licensed for work in Kensington and Chelsea?

    Fitters carry £5m public liability cover. Most garden sheds fall under permitted development if they sit under 2.5m at the eaves within 2m of a boundary and the total of all outbuildings stays under 50% of the garden — we flag it if a build looks close to either limit rather than assume it is fine. Certificates go out with the booking confirmation, which is what Royal Borough of Kensington and Chelsea tenancies and most local managing agents ask for.

  • Who turns up, and with what?

    One fitter for a small shed on a ready base; two for anything over 8x6ft or where roof panels need lifting together. Vehicles are ULEZ-compliant, which matters in every Kensington and Chelsea postcode, and the crew carries everything needed to complete the job in one visit.

  • What is not included?

    Laying a full concrete slab base — quoted separately as a groundworks job, Electrical supply to the shed, which needs a registered electrician for the armoured cable and consumer unit work and Party wall or boundary consent where a shed sits within 2m of a neighbour's fence and exceeds the height limit. If something on that list turns up in Kensington and Chelsea, we tell you at survey and point you at the right trade rather than taking the booking anyway.

Free quote · 1-hour reply

Get a fixed shed assembly price for Kensington and Chelsea

Send a few details and you get a written quote for your Kensington and Chelsea address, with permits and charges shown separately.

No deposit is taken until the price and slot are confirmed in writing.

Reviews for flat-pack assembly across the UK

4.5 ★ from 3,131 Trustpilot reviews
★★★★★Trustpilot
Sulltan is the best handyman in London. He is very reliable and professional. I highly recommend.
Bu li · · View on Trustpilot
★★★★★Trustpilot
Really pleased with our house move. The guys came on time, loaded everything carefully like a huge jigsaw! Nothing got broken and even though they were working on an hourly rate they were really efficient, not to waste any time. Our only criticism is that we needed a few items disassembled to get on the… Read in full →
Emily · · View on Trustpilot
★★★★★Google
Sulltan is the best handyman in London , Highly recommend ......
Chyve Sta. Ana · View on Google

Read all 48 flat-pack assembly reviews

4.5 out of 5 from 3,131 reviewsCheck on GoogleCheck on Trustpilot

Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.