Westminster · SW1 · Flat-pack assembly
IKEA and flat-pack furniture assembly in Pimlico, SW1
We assemble in Pimlico the way the stock demands: stucco terraces converted into flats, the churchill gardens estate and garden-square mansion blocks, deck access or a single lift shared with every other flat in Pimlico, so we book a delivery window — where 27% owner-occupation means the same home is booked again rather than a new tenant each year. Everything is levelled to the floor in the room, not the floor the instruction sheet assumes.
- Trustpilot 4.5· 3,100+ reviews
- Google 3.9· 1,429 reviews
- £1m public liability
- Licensed waste carrier CBDU300454
- Since 2019
- From £35 an item, £190 a half day — priced per unit, fixed in writing
- precast concrete panels and dense blockwork in Pimlico, often with surface-run conduit — which is why Westminster City Council kerb rules get settled before the van is loaded here, so the anti-tip strap goes into something structural
- Deck access or a single lift shared with every other flat in Pimlico, so we book a delivery window — where 27% owner-occupation means the same home is booked again rather than a new tenant each year
- Westminster City Council permits, ULEZ and packaging removal already inside the price

- Trustpilot 4.5· 3,100+ reviews
- Google 3.9· 1,429 reviews
- £1m public liability
- Licensed waste carrier CBDU300454
- Since 2019
The service, locally
Flat-pack and IKEA assembly in Pimlico
One fitter, one van, one written price. Wall fixings, floor protection and taking the cardboard away are inside the quote for every SW1 booking.
- From, per item built
- £35From, per item built
- Pimlico homes are flats
- 93%Pimlico homes are flats
- Item types priced
- 22Item types priced
- Households in Pimlico
- 7,917Households in Pimlico
How it works
How a Pimlico assembly visit works
- Send the list, get a fixed priceSend the item list or a photo of the boxes. We price each unit from the published SW1 list and confirm one written figure, including the anchoring your walls need.
- Access sorted for SW1Resident-permit streets all week, basement flats down steep steps and no lifts in most conversions. We confirm the carry route for two-metre panels and reserve the kerb so the boxes move once.
- Built, anchored, packaging goneWe build in the room, level to the floor you actually have, adjust every hinge and runner, anchor with set clear of scanned reinforcement and buried cable, over an SDS-drilled hole and a screwbolt — measured on the walk in from Pimlico (Victoria) rather than assumed from a map, and leave with all the packaging.
- Get my price
Scope
What is included in Pimlico
Included in every visit
- Every unit on your Pimlico list built, squared and levelled to the floor in the room it belongs in
- Anti-tip anchoring where the item needs it: set clear of scanned reinforcement and buried cable, over an SDS-drilled hole and a screwbolt — measured on the walk in from Pimlico (Victoria) rather than assumed from a map
- Standard on Westminster bookings: doors, hinges, drawer runners and sliding tracks adjusted so nothing drifts or catches, with 7,917 households in this neighbourhood, it is the question we are asked most
- A stud, pipe and cable scan before any fixing goes into a wall, checked on every SW1 visit
- Westminster City Council permits or bay suspensions where SW1 needs one
Not included — and why
- New electrical circuits, consumer-unit work or anything notifiable under Part P — that belongs to a registered electrician, quoted separately if you need it arranged in SW1
- Gas appliance connection, including hobs and cookers, which is Gas Safe work, outside the fixed price on Pimlico bookings
- Plumbing in a sink, tap or integrated appliance as part of a kitchen run (we can book that separately), and we will say so before the SW1 visit rather than on the day
- Manufacturer spare parts — missing dowels, cam locks or damaged panels are ordered at cost with the receipt, handled by Westminster City Council or a specialist contractor instead
- Cutting into a structural wall or altering an opening to make a unit fit, which we refer on to the right trade in Pimlico
The complete item list, anchoring matrix and scope policy sit on one page: assembly reference.
Why Hello Services
Why book assembly in Pimlico with us
DBS-checked and insured
£1m public liability and a fitter you would be happy to leave in the flat while you work on this side of Westminster, with 7,917 households on this patch. Near Tate Britain that usually means an earlier start so the van can be unloaded once.
Independent of every retailer
We build any brand's flat-pack, so the advice you get is about your furniture, not a shop's upsell across SW1, with 27% owner-occupation locally.
Anchored, not just assembled
Every tall unit in Pimlico is strapped using set clear of scanned reinforcement and buried cable, over an SDS-drilled hole and a screwbolt — measured on the walk in from Pimlico (Victoria) rather than assumed from a map — and load-tested before we leave on the streets near Tate Britain, with 93% of homes here being flats.
Per-item prices
Flat-pack assembly prices in Pimlico
| Item | From | To | Build time | What it covers |
|---|---|---|---|---|
| Modular wardrobe system (per 100cm frame)Anchored to the wall | £120 | £260 | 3 hrs | Frames built, levelled, joined, interiors fitted and the run strapped to the wall |
| Ottoman or drawer storage bed | £85 | £170 | 2 hrs | Gas struts fitted safely, drawers aligned, base tested loaded before we leave |
| Wall-mounted shelf or cabinetAnchored to the wall | £45 | £110 | 50 mins | Substrate checked and scanned, then the anchor that the wall genuinely needs |
Modular wardrobe system (per 100cm frame)
£120 – £260
3 hrs · anchored to the wall
Frames built, levelled, joined, interiors fitted and the run strapped to the wall
Ottoman or drawer storage bed
£85 – £170
2 hrs
Gas struts fitted safely, drawers aligned, base tested loaded before we leave
Wall-mounted shelf or cabinet
£45 – £110
50 mins · anchored to the wall
Substrate checked and scanned, then the anchor that the wall genuinely needs
These are the 8 units booked most often in Pimlico SW1, where 93% of homes are flats. All 22 items we price are on the reference page, and the labour rate is the same in every London borough.
£55 minimum per visit. Prices include VAT, the van, all anchoring hardware from our own stock and taking the flattened cardboard and polystyrene away. Nothing is added on the day without your written agreement first. Full item list, anchoring matrix and scope policy.
Instant estimate
Price your Pimlico delivery
Prices include VAT, the van, all anchoring hardware from our own stock and taking the flattened cardboard and polystyrene away. Nothing is added on the day without your written agreement first. Hello Services is an independent furniture assembly company. We are not affiliated with, endorsed by or connected to IKEA or any other flat-pack retailer. Brand and range names are used only to describe the furniture we assemble.
Rates and local costs
Hourly, half day or full day in Pimlico
Single item
£55
from, per item
One bookcase, chest of drawers, desk or bed frame built, levelled and anchored.
Hourly rate
£55
per hour, one-hour minimum
Best when the boxes are unlabelled, second-hand or missing their instructions.
Half day
£190
up to 4 hours
The most-booked London slot: a bedroom's worth of boxes in one visit, one price.
- Parking and permits
- Resident-permit streets all week, basement flats down steep steps and no lifts in most conversions. Westminster City Council visitor permits and bay suspensions are arranged and paid for by us, so long boxes are carried once, not twice.
- Charging zones
- Part of Westminster sits inside the Congestion Charge zone and all of it is inside ULEZ. Our vans are ULEZ compliant and that cost is never added to a SW1 invoice.
- Access and lifts
- 93% of homes around Pimlico are flats, so goods-lift booking and stair carries are planned before the slot rather than discovered on the day.
- Packaging removal
- Flattened cardboard, polystyrene and strapping leave in the van at the end of every SW1 visit, at no extra charge.
Wall plugs, through-fixings, resin anchors, hollow-wall anchors and anti-tip straps come out of the van and are inside the price. Replacement dowels, cam locks and manufacturer spare parts are ordered at cost with the receipt attached to your invoice.
Walls and anchoring
What holds an anti-tip strap in Pimlico
Most likely here
Pimlico gives us council and housing-association blocks in precast concrete and dense block, the reality on the streets around Tate Britain
- Wall construction
- precast concrete panels and dense blockwork in Pimlico, often with surface-run conduit — which is why Westminster City Council kerb rules get settled before the van is loaded
- The fixing we use
- set clear of scanned reinforcement and buried cable, over an SDS-drilled hole and a screwbolt — measured on the walk in from Pimlico (Victoria) rather than assumed from a map
- Access
- deck access or a single lift shared with every other flat in Pimlico, so we book a delivery window — where 27% owner-occupation means the same home is booked again rather than a new tenant each year
Median age in the Pimlico neighbourhood is 36.2, and the mix shows in the diary: storage units and safety anchoring for a whole flat, over children's beds — and with 46% one-person households in Pimlico, one adult is usually the only pair of hands on site.
Hello Services is an independent furniture assembly company. We are not affiliated with, endorsed by or connected to IKEA or any other flat-pack retailer. Brand and range names are used only to describe the furniture we assemble.
IKEA and flat-pack assembly reviews from Greater London customers
4.5 ★ from 3,131 Trustpilot reviewsSulltan is the best handyman in London. He is very reliable and professional. I highly recommend.
Quick assembly of a big gas bbq . Friendly service too
Sulltan and Adam were absolutely brilliant. They assembled some complicated IKEA items perfectly. They were really helpful and left assembly areas clean and tidy. I have no hesitation in recommending their services.
Read all 6 IKEA and flat-pack assembly reviews from Greater London customers →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.
Coverage
Flat-pack assembly around Pimlico
Nearby areas we also cover
- Flat-pack assembly in VictoriaSW1SW1
- Flat-pack assembly in BelgraviaSW1SW1
- Flat-pack assembly in Westminster and WhitehallSW1SW1
- Flat-pack assembly in KnightsbridgeSW1SW1
- Flat-pack assembly in St James'sSW1SW1
- Flat-pack assembly in ChelseaSW3 · Kensington and ChelseaSW3
- Flat-pack assembly in MaryleboneW1W1
- Flat-pack assembly in Vauxhall and Nine ElmsSW8 · LambethSW8
Related services
Other work we do in Pimlico
Handyman in Pimlico
Shelves, TV brackets, doors, taps and the rest of the SW1 snag list on the same visit.
Man with a van in Pimlico
Collect the flat-pack from the store or a marketplace seller, then build it the same day.
House removals in Pimlico
Furniture dismantled at one end and reassembled at the other, by the same crew.
About the area
Pimlico in context
Pimlico sits in Westminster, a short walk from Tate Britain and served by Pimlico (Victoria). The ONS neighbourhood covering it holds 7,917 households, 93% of them flats — the mix that fills our diary with wardrobe runs and storage beds rather than garden furniture.
Where Pimlico sits in our coverage
Pimlico sits inside the coverage published on our flat-pack assembly in Westminster page, which sits under flat-pack assembly across London. The same crew works the adjoining postcodes too — flat-pack assembly in Victoria SW1 (under ½ mile), flat-pack assembly in Belgravia SW1 (under ½ mile), flat-pack assembly in Westminster and Whitehall SW1 (under ½ mile), flat-pack assembly in Chelsea SW3 (1.2 miles) and flat-pack assembly in Vauxhall and Nine Elms SW8 (1.5 miles). If your address sits on the boundary, book the closest page — the price and the crew are the same. For every trade we run at this postcode, see all services in Pimlico.
Most booked alongside this in Pimlico
Area at a glance
Pimlico SW1 by the numbers
- Area
- Pimlico, Westminster
- Postcodes served
- SW1
- Nearest station
- Pimlico (Victoria)
- Dominant wall construction
- precast concrete panels and dense blockwork in Pimlico, often with surface-run conduit — which is why Westminster City Council kerb rules get settled before the van is loaded
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhoods Pimlico North, Pimlico South (E02000981, E02000983) — the published geography that covers Pimlico, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL).
Questions
Pimlico SW1 flat-pack assembly questions
Per item, fixed before we arrive: bookcases and cube storage from £35, chests of drawers from £45, bed frames from £55, hinged wardrobes from £75 and modular wardrobe runs from £120 per 100cm frame. A half day in SW1 is £190 for a batched list.
Every unit designed to be restrained gets restrained. Because SW1 walls are typically precast concrete panels and dense blockwork in Pimlico, often with surface-run conduit — which is why Westminster City Council kerb rules get settled before the van is loaded, the fixing we carry is set clear of scanned reinforcement and buried cable, over an SDS-drilled hole and a screwbolt — measured on the walk in from Pimlico (Victoria) rather than assumed from a map — chosen on site after a cable and pipe scan, then load-tested in front of you.
Usually yes. So we book a delivery window, over deck access or a single lift shared with every other flat, the reality on the streets around Tate Britain. Resident-permit streets all week, basement flats down steep steps and no lifts in most conversions. Westminster City Council permits and bay suspensions are arranged and paid for by us before the visit. Near Tate Britain that usually means an earlier start so the van can be unloaded once.
All of it. Flattened cardboard, polystyrene, plastic strapping and the offcuts leave with us at the end of the Pimlico visit and go to a licensed transfer station — we are a registered waste carrier.
We carry dowels, cam locks, screws and common fittings, so most short-shipped packs are finished the same Pimlico visit. Where a panel is damaged we photograph it, note the article number for your retailer claim, and return to finish at no extra labour charge.
Yes. Take-down of existing furniture is quoted alongside the build, and where the old unit is being disposed of we can take it away under our waste carrier licence rather than leaving it on the Pimlico landing.
Source: ONS Census 2021, borough totals via Nomis (table TS008, TS041, TS007A, TS044, TS054, TS003). Figures describe the whole borough, the smallest area ONS publishes every one of these tables for.
Guides
Read before you book
IKEA and flat-pack assembly costs in London: what each item really costs
Per-item prices, the hourly alternative, and the London access costs behind every quote.
9 min read
Anchoring flat-pack furniture safely to a London wall
The anti-tip fixing that holds in each London wall type, and the one that fails.
8 min read
Book flat-pack assembly in Pimlico SW1
Send the item list or a photo of the delivery stack for a fixed written price the same working day. Anchoring hardware, permits and taking the packaging away are already in the figure.
