South London · Flat-pack assembly
IKEA and flat-pack furniture assembly in Merton
Flat-pack and IKEA assembly across Merton covers 6 areas, and the wall behind the plaster changes street by street. 40% of homes here are flats, so half the diary is conversion-flat lath and dot-and-dab board, and half is solid brick and timber stud. Every anti-tip strap goes into something structural, never into the board alone.
- Trustpilot 4.5· 3,100+ reviews
- Google 3.9· 1,429 reviews
- £1m public liability
- Licensed waste carrier CBDU300454
- Since 2019
- 6 areas covered, each with its own page
- From £35 an item, £190 a half day, £340 a full day
- Anti-tip anchoring, hardware and packaging removal inside every price
- London Borough of Merton permits arranged and paid for by us
- Trustpilot 4.5· 3,100+ reviews
- Google 3.9· 1,429 reviews
- £1m public liability
- Licensed waste carrier CBDU300454
- Since 2019
The service, locally
Furniture assembly across Merton
Prices are per item and identical in every Merton postcode. What changes locally is access: the permit, the lift booking and the carry, all arranged and paid for by us before the slot.
- Areas covered
- 6Areas covered
- Homes that are flats
- 40%Homes that are flats
- From, per item
- £35From, per item
- Half-day rate
- £190Half-day rate
How it works
How a Merton assembly visit works
- Send the list, get a fixed priceTell us what is in the pile — model names, box counts or just a photo. Every Colliers Wood quote is itemised per unit, so you can see what each build costs before you accept it.
- Access sorted for SW19Access is arranged before the day: communal stairs with a half-landing turn; locally that also means so tall wardrobe panels are measured before the van is loaded, measured on the walk in from Colliers Wood (Northern) rather than assumed from a map, with the London Borough of Merton permit paid for by us.
- Built, anchored, packaging goneEach unit is torqued, squared and load-tested, tall pieces are strapped using a strap fixed through the plaster into a located timber stud in SW19, never into the lime plaster itself, where 47% owner-occupation means the same home is booked again rather than a new tenant each year, and the flat is left cleaner than the delivery left it.
- Get my price
Scope
What is included in Merton
Included in every visit
- Every unit on your Colliers Wood list built, squared and levelled to the floor in the room it belongs in
- Anti-tip anchoring where the item needs it: a strap fixed through the plaster into a located timber stud in SW19, never into the lime plaster itself, where 47% owner-occupation means the same home is booked again rather than a new tenant each year
- On SW19 jobs: doors, hinges, drawer runners and sliding tracks adjusted so nothing drifts or catches, with 67% of homes here being flats, planned around the stair or the lift
- In Colliers Wood: a stud, pipe and cable scan before any fixing goes into a wall, the way it is done on Colliers Wood jobs
- London Borough of Merton permits or bay suspensions where SW19 needs one
Not included — and why
- New electrical circuits, consumer-unit work or anything notifiable under Part P — that belongs to a registered electrician, and we will say so before the SW19 visit rather than on the day
- Gas appliance connection, including hobs and cookers, which is Gas Safe work, outside the fixed price on Colliers Wood bookings
- Plumbing in a sink, tap or integrated appliance as part of a kitchen run (we can book that separately), which we refer on to the right trade in Colliers Wood
- Manufacturer spare parts — missing dowels, cam locks or damaged panels are ordered at cost with the receipt, handled by London Borough of Merton or a specialist contractor instead
- Cutting into a structural wall or altering an opening to make a unit fit, outside the fixed price on Colliers Wood bookings
The complete item list, anchoring matrix and scope policy sit on one page: assembly reference.
Why Hello Services
Why book assembly in Merton with us
Packaging leaves with us
Flattened cardboard, polystyrene and strapping go in the van at the end of the Colliers Wood visit on this side of Merton, with Merton parking rules in play.
Permits and access handled
London Borough of Merton permits, bay suspensions, concierge sign-in and goods-lift booking are arranged by us in Colliers Wood, with 33% of Colliers Wood homes being houses.
Missing parts do not stop us
Dowels, cam locks and common fittings are in the van in this 67% flats neighbourhood, with this being a short walk from Colliers Wood (Northern), so a short-shipped pack still finishes the same day.
Per-item prices
Flat-pack assembly prices in Merton
| Item | From | To | Build time | What it covers |
|---|---|---|---|---|
| Two or three-door hinged wardrobeAnchored to the wall | £75 | £150 | 1 hr 45 mins | Built flat, stood in place, hinges adjusted and anchored with an anti-tip fixing |
| Bed frame (single to super king) | £55 | £120 | 1 hr 15 mins | Slats seated, joints torqued and re-checked so the frame does not creak in a month |
| Chest of drawersAnchored to the wall | £45 | £95 | 1 hr | Drawer runners aligned, fronts levelled, unit strapped to the wall as required |
Two or three-door hinged wardrobe
£75 – £150
1 hr 45 mins · anchored to the wall
Built flat, stood in place, hinges adjusted and anchored with an anti-tip fixing
Bed frame (single to super king)
£55 – £120
1 hr 15 mins
Slats seated, joints torqued and re-checked so the frame does not creak in a month
Chest of drawers
£45 – £95
1 hr · anchored to the wall
Drawer runners aligned, fronts levelled, unit strapped to the wall as required
Merton leads with these 8 rows for a reason — the local stock produces the same order again and again. The full 22-item list, with anchoring policy, sits on the reference page.
£55 minimum per visit. Prices include VAT, the van, all anchoring hardware from our own stock and taking the flattened cardboard and polystyrene away. Nothing is added on the day without your written agreement first. Full item list, anchoring matrix and scope policy.
Instant estimate
Price your Merton delivery
Prices include VAT, the van, all anchoring hardware from our own stock and taking the flattened cardboard and polystyrene away. Nothing is added on the day without your written agreement first. Hello Services is an independent furniture assembly company. We are not affiliated with, endorsed by or connected to IKEA or any other flat-pack retailer. Brand and range names are used only to describe the furniture we assemble.
Rates and local costs
Hourly, half day or full day in Merton
Single item
£55
from, per item
One bookcase, chest of drawers, desk or bed frame built, levelled and anchored.
Hourly rate
£55
per hour, one-hour minimum
Best when the boxes are unlabelled, second-hand or missing their instructions.
Half day
£190
up to 4 hours
The most-booked London slot: a bedroom's worth of boxes in one visit, one price.
- Parking and permits
- High Street red route, riverside estate roads and new blocks with booked lifts. London Borough of Merton visitor permits and bay suspensions are arranged and paid for by us, so long boxes are carried once, not twice.
- Charging zones
- Merton sits outside the Congestion Charge zone and inside ULEZ. Our vans are ULEZ compliant and that cost is never added to a SW19 invoice.
- Access and lifts
- 67% of homes around Colliers Wood are flats, so goods-lift booking and stair carries are planned before the slot rather than discovered on the day.
- Packaging removal
- Flattened cardboard, polystyrene and strapping leave in the van at the end of every SW19 visit, at no extra charge.
Wall plugs, through-fixings, resin anchors, hollow-wall anchors and anti-tip straps come out of the van and are inside the price. Replacement dowels, cam locks and manufacturer spare parts are ordered at cost with the receipt attached to your invoice.
Walls and anchoring
What holds an anti-tip strap in Merton
Most likely here
Victorian and Edwardian conversion flats with original lath-and-plaster partitions on these streets — and with 29% one-person households in Colliers Wood, one adult is usually the only pair of hands on site
- Wall construction
- lath and plaster over timber studs in Colliers Wood, with solid brick on the party walls, the pattern behind 4,286 households inside the SW19 neighbourhood
- The fixing we use
- a strap fixed through the plaster into a located timber stud in SW19, never into the lime plaster itself, where 47% owner-occupation means the same home is booked again rather than a new tenant each year
- Access
- communal stairs with a half-landing turn; locally that also means so tall wardrobe panels are measured before the van is loaded, measured on the walk in from Colliers Wood (Northern) rather than assumed from a map
29% of Colliers Wood households are one-person, which is where single-visit builds — one wardrobe, one bed, one desk — outnumber whole-flat days.
Hello Services is an independent furniture assembly company. We are not affiliated with, endorsed by or connected to IKEA or any other flat-pack retailer. Brand and range names are used only to describe the furniture we assemble.
IKEA and flat-pack assembly reviews from Greater London customers
4.5 ★ from 3,131 Trustpilot reviewsReally pleased with our house move. The guys came on time, loaded everything carefully like a huge jigsaw! Nothing got broken and even though they were working on an hourly rate they were really efficient, not to waste any time. Our only criticism is that we needed a few items disassembled to get on the… Read in full →
I booked the service at 10pm last night was the job was completed by 2pm the next day at very short notice. Adam arrived earlier than expected which was great. He was very friendly and got two IKEA bed side tables and a wardrobe storage unit built in under 2 hours. He also kindly helped… Read in full →
Sulltan is the best handyman in London. He is very reliable and professional. I highly recommend.
Read all 6 IKEA and flat-pack assembly reviews from Greater London customers →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.
Coverage
Flat-pack assembly around Merton
Related services
Other work we do in Merton
Handyman in Colliers Wood
Shelves, TV brackets, doors, taps and the rest of the SW19 snag list on the same visit.
Man with a van in Colliers Wood
Collect the flat-pack from the store or a marketplace seller, then build it the same day.
House removals in Colliers Wood
Furniture dismantled at one end and reassembled at the other, by the same crew.
About the borough
Merton in context
Housing around Colliers Wood is victorian and edwardian conversion flats with original lath-and-plaster partitions on these streets — and with 29% one-person households in colliers wood, one adult is usually the only pair of hands on site. With 44% of homes privately rented and 9,853 residents in the Colliers Wood neighbourhood, move-in week is the busiest assembly window of the month here.
Area at a glance
Merton by the numbers
- Area
- Colliers Wood, Merton
- Postcodes served
- SW19, CR4
- Nearest station
- Colliers Wood (Northern)
- Dominant wall construction
- lath and plaster over timber studs in Colliers Wood, with solid brick on the party walls, the pattern behind 4,286 households inside the SW19 neighbourhood
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhood Colliers Wood (E02000693) — the published geography that covers Colliers Wood, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL).
Questions
Merton flat-pack assembly questions
Per item and identical in every Merton postcode: from £35 for a bookcase, £45 a chest of drawers, £55 a bed frame, £75 a hinged wardrobe and £120 per 100cm of a modular wardrobe run. Half day £190, full day £340.
All 6 areas, each with its own page covering the housing stock, the wall construction that comes with it and what a two-metre box has to get through to reach the room. Championship-fortnight restrictions in SW19, hill access to Wimbledon Village, and driveways common further out.
Yes, on every item designed to be restrained. We scan for cable and pipe, then use the fixing the wall genuinely needs — a stud screw in lath, a through-fixing on dot-and-dab, resin in soft brick, a screwbolt in concrete — and load-test it before leaving.
Yes. Void turnarounds, furnished-let packs and student handovers are handled with photographs on completion, an itemised invoice per property and one contact for a portfolio. We can attend with keys from the agent.
Where a visitor permit or a bay suspension is needed we arrange and pay for it with London Borough of Merton, and the cost is already inside your quote. Our vans are ULEZ compliant.
Yes — £1m public liability, DBS-checked fitters, and photographs of every anchored unit on completion. If a fixing we installed fails we come back and put it right.
Source: ONS Census 2021, borough totals via Nomis (table TS008, TS041, TS007A, TS044, TS054, TS003). Figures describe the whole borough, the smallest area ONS publishes every one of these tables for.
Guides
Read before you book
IKEA and flat-pack assembly costs in London: what each item really costs
Per-item prices, the hourly alternative, and the London access costs behind every quote.
9 min read
Anchoring flat-pack furniture safely to a London wall
The anti-tip fixing that holds in each London wall type, and the one that fails.
8 min read
Book flat-pack assembly in Merton
Send the item list or a photo of the delivery stack for a fixed written price the same working day. Anchoring hardware, permits and taking the packaging away are already in the figure.