Central London · Flat-pack assembly
IKEA and flat-pack furniture assembly in Camden
**Furniture assembly in Camden** runs to 16 areas. With 87% of homes in flats, most bookings are wardrobes, storage beds and shelving — and most of them need an anchor chosen for the substrate rather than the one in the box. Camden's CPZs run seven days in parts of Kentish Town and Camden Town; narrow Hampstead lanes rarely take anything bigger than a Luton.
- 16 areas covered, each with its own page
- From £35 an item, £190 a half day, £340 a full day
- Anti-tip anchoring, hardware and packaging removal inside every price
- London Borough of Camden permits arranged and paid for by us
The service, locally
Furniture assembly across Camden
Prices are per item and identical in every Camden postcode. What changes locally is access: the permit, the lift booking and the carry, all arranged and paid for by us before the slot.
- Areas covered
- 16Areas covered
- Homes that are flats
- 87%Homes that are flats
- From, per item
- £35From, per item
- Half-day rate
- £190Half-day rate
Instant estimate
Price your Camden delivery
Prices include VAT, the van, all anchoring hardware from our own stock and taking the flattened cardboard and polystyrene away. Nothing is added on the day without your written agreement first. Hello Services is an independent furniture assembly company. We are not affiliated with, endorsed by or connected to IKEA or any other flat-pack retailer. Brand and range names are used only to describe the furniture we assemble.
How it works
How a Camden assembly visit works
- Send the list, get a fixed pricePhotograph the delivery stack and the room it is going in. We size the slot for Belsize Park, confirm the access route and put the whole figure in writing the same working day.
- Access sorted for NW3We book the London Borough of Camden permit or the bay suspension and, where it applies, communal stairs with a half-landing turn, so tall wardrobe panels are measured before the van is loaded.
- Built, anchored, packaging goneWe build in the room, level to the floor you actually have, adjust every hinge and runner, anchor with a strap fixed through the plaster into a located timber stud, never into the lime plaster itself, and leave with all the packaging.
- Get my price
Walls and anchoring
What holds an anti-tip strap in Camden
Most likely here
Victorian and Edwardian conversion flats with original lath-and-plaster partitions
- Wall construction
- lath and plaster over timber studs, with solid brick on the party walls
- The fixing we use
- a strap fixed through the plaster into a located timber stud, never into the lime plaster itself
- Access
- communal stairs with a half-landing turn, so tall wardrobe panels are measured before the van is loaded
45% of Belsize Park households are one-person, which is where single-visit builds — one wardrobe, one bed, one desk — outnumber whole-flat days.
Belsize Park (Northern) is the nearest station, and London Borough of Camden controls the kerb outside, so the permit is bought before the van leaves rather than argued about on arrival.
3,000 households sit inside the ONS neighbourhood covering Belsize Park, and 93% of them are flats — which is why communal stairs with a half-landing turn decides the slot length more often than the furniture does.
Hello Services is an independent furniture assembly company. We are not affiliated with, endorsed by or connected to IKEA or any other flat-pack retailer. Brand and range names are used only to describe the furniture we assemble.
Why Hello Services
Why book assembly in Camden with us
Priced per item, not per hour
Your NW3 list is quoted per unit in writing the same working day, with no doorstep re-quote.
We scan before we drill
Cable and pipe detector on every wall, because a plasterboard plug spun into lime plaster, which crumbles the key and lets a loaded wardrobe walk forward is the callback nobody wants.
Packaging leaves with us
Flattened cardboard, polystyrene and strapping go in the van at the end of the Belsize Park visit.
Permits and access handled
London Borough of Camden permits, bay suspensions, concierge sign-in and goods-lift booking are arranged by us.
Per-item prices
Flat-pack assembly prices in Camden
| Item | From | To | Build time | What it covers |
|---|---|---|---|---|
| Modular wardrobe system (per 100cm frame)Anchored to the wall | £120 | £260 | 3 hrs | Frames built, levelled, joined, interiors fitted and the run strapped to the wall |
| Ottoman or drawer storage bed | £85 | £170 | 2 hrs | Gas struts fitted safely, drawers aligned, base tested loaded before we leave |
| Wall-mounted shelf or cabinetAnchored to the wall | £45 | £110 | 50 mins | Substrate checked and scanned, then the anchor that the wall genuinely needs |
| Desk or workstation | £45 | £100 | 55 mins | Levelled to the room, cable tray fitted and sit-stand mechanisms tested |
| Sofa, corner unit or armchair | £60 | £140 | 1 hr 30 mins | Modules joined and squared, feet levelled to the floor you actually have |
| TV bench or media unitAnchored to the wall | £50 | £110 | 1 hr | Cable routing planned first, doors aligned, unit anchored where it is tall |
| Divan base, headboard or mattress topper fitting | £40 | £85 | 45 mins | Base joined, castors or legs fitted, headboard bolted to the correct height |
| Dining or extending table | £45 | £100 | 55 mins | Legs squared to the top, extension mechanism tested through its full travel |
Modular wardrobe system (per 100cm frame)
£120 – £260
3 hrs · anchored to the wall
Frames built, levelled, joined, interiors fitted and the run strapped to the wall
Ottoman or drawer storage bed
£85 – £170
2 hrs
Gas struts fitted safely, drawers aligned, base tested loaded before we leave
Wall-mounted shelf or cabinet
£45 – £110
50 mins · anchored to the wall
Substrate checked and scanned, then the anchor that the wall genuinely needs
Desk or workstation
£45 – £100
55 mins
Levelled to the room, cable tray fitted and sit-stand mechanisms tested
Sofa, corner unit or armchair
£60 – £140
1 hr 30 mins
Modules joined and squared, feet levelled to the floor you actually have
TV bench or media unit
£50 – £110
1 hr · anchored to the wall
Cable routing planned first, doors aligned, unit anchored where it is tall
Divan base, headboard or mattress topper fitting
£40 – £85
45 mins
Base joined, castors or legs fitted, headboard bolted to the correct height
Dining or extending table
£45 – £100
55 mins
Legs squared to the top, extension mechanism tested through its full travel
These are the 8 units booked most often in Camden, where 87% of homes are flats. All 22 items we price are on the reference page, and the labour rate is the same in every London borough.
£55 minimum per visit. Prices include VAT, the van, all anchoring hardware from our own stock and taking the flattened cardboard and polystyrene away. Nothing is added on the day without your written agreement first. Full item list, anchoring matrix and scope policy.
Rates and local costs
Hourly, half day or full day in Camden
Single item
£55
from, per item
One bookcase, chest of drawers, desk or bed frame built, levelled and anchored.
Hourly rate
£55
per hour, one-hour minimum
Best when the boxes are unlabelled, second-hand or missing their instructions.
Half day
£190
up to 4 hours
The most-booked London slot: a bedroom's worth of boxes in one visit, one price.
Full day
£340
up to 8 hours
A whole flat-out: wardrobe system, beds, storage and the living room in a single day.
- Parking and permits
- Resident-permit streets, hill gradients and conversion flats up three or four flights. London Borough of Camden visitor permits and bay suspensions are arranged and paid for by us, so long boxes are carried once, not twice.
- Charging zones
- Part of Camden sits inside the Congestion Charge zone and all of it is inside ULEZ. Our vans are ULEZ compliant and that cost is never added to a NW3 invoice.
- Access and lifts
- 93% of homes around Belsize Park are flats, so goods-lift booking and stair carries are planned before the slot rather than discovered on the day.
- Packaging removal
- Flattened cardboard, polystyrene and strapping leave in the van at the end of every NW3 visit, at no extra charge.
Wall plugs, through-fixings, resin anchors, hollow-wall anchors and anti-tip straps come out of the van and are inside the price. Replacement dowels, cam locks and manufacturer spare parts are ordered at cost with the receipt attached to your invoice.
Scope
What is included in Camden
Included in every visit
- Every unit on your Belsize Park list built, squared and levelled to the floor in the room it belongs in
- Anti-tip anchoring where the item needs it: a strap fixed through the plaster into a located timber stud, never into the lime plaster itself
- Doors, hinges, drawer runners and sliding tracks adjusted so nothing drifts or catches
- A stud, pipe and cable scan before any fixing goes into a wall
- London Borough of Camden permits or bay suspensions where NW3 needs one
- Flattened cardboard, polystyrene and strapping taken away in the van
Not included — and why
- New electrical circuits, consumer-unit work or anything notifiable under Part P — that belongs to a registered electrician
- Gas appliance connection, including hobs and cookers, which is Gas Safe work
- Plumbing in a sink, tap or integrated appliance as part of a kitchen run (we can book that separately)
- Manufacturer spare parts — missing dowels, cam locks or damaged panels are ordered at cost with the receipt
- Cutting into a structural wall or altering an opening to make a unit fit
The complete item list, anchoring matrix and scope policy sit on one page: assembly reference.
Coverage
Flat-pack assembly around Camden
Areas we assemble in across Camden
- Flat-pack assembly in Belsize ParkNW3NW3
- Flat-pack assembly in BloomsburyWC1WC1
- Flat-pack assembly in Camden TownNW1NW1
- Flat-pack assembly in Chalk FarmNW3, NW1NW3
- Flat-pack assembly in Dartmouth ParkNW5NW5
- Flat-pack assembly in EustonNW1NW1
- Flat-pack assembly in Gospel OakNW5, NW3NW5
- Flat-pack assembly in HampsteadNW3NW3
- Flat-pack assembly in HolbornWC1, WC2WC1
- Flat-pack assembly in Kentish TownNW5NW5
- Flat-pack assembly in KilburnNW6NW6
- Flat-pack assembly in King's CrossN1C, N1N1C
- Flat-pack assembly in Primrose HillNW1NW1
- Flat-pack assembly in Regent's ParkNW1NW1
- Flat-pack assembly in Swiss CottageNW3NW3
- Flat-pack assembly in West HampsteadNW6NW6
Neighbouring boroughs
What customers say about IKEA and flat-pack assembly
3.9 ★ from 1,408 Google reviewsI'm answering on behalf my wife who was & still is in hospital & can't get wifi , Your two gentlemen were absolutely brilliant very impressed with the results I'm hoping my wife will be home soon so she can see the results before I make a mess when I come from the garden. Eric… Read in full →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.
Guides
Read before you book
IKEA and flat-pack assembly costs in London: what each item really costs
Per-item prices, the hourly alternative, and the London access costs behind every quote.
9 min read
Anchoring flat-pack furniture safely to a London wall
The anti-tip fixing that holds in each London wall type, and the one that fails.
8 min read
Planning a whole-flat furniture build around a London move-in date
A room-by-room build sequence, realistic timings and the access bookings to make first.
8 min read
Related services
Other work we do in Camden
Handyman in Belsize Park
Shelves, TV brackets, doors, taps and the rest of the NW3 snag list on the same visit.
Man with a van in Belsize Park
Collect the flat-pack from the store or a marketplace seller, then build it the same day.
House removals in Belsize Park
Furniture dismantled at one end and reassembled at the other, by the same crew.
End of tenancy cleaning in Belsize Park
Book the clean for the day after the furniture goes in, and the flat hands over ready.
Rubbish and furniture clearance in Belsize Park
Old wardrobes and beds taken down and taken away under our waste carrier licence.
Office furniture assembly in Belsize Park
Desks, pedestals and storage walls built out of hours so NW3 teams start on time.
About the borough
Camden in context
Belsize Park sits in Camden, a short walk from Belsize Village and served by Belsize Park (Northern). The ONS neighbourhood covering it holds 3,000 households, 93% of them flats — the mix that fills our diary with wardrobe runs and storage beds rather than garden furniture.
Camden at a glance
- Area
- Belsize Park, Camden
- Postcodes served
- NW3
- Nearest station
- Belsize Park (Northern)
- Dominant wall construction
- lath and plaster over timber studs, with solid brick on the party walls
- Anchoring method
- a strap fixed through the plaster into a located timber stud, never into the lime plaster itself
- New-build density
- low across the local stock
- Access profile
- communal stairs with a half-landing turn, so tall wardrobe panels are measured before the van is loaded
- Most-booked order
- an alcove-width wardrobe and a chest of drawers, both anchored back to something structural
- Watch out for
- a plasterboard plug spun into lime plaster, which crumbles the key and lets a loaded wardrobe walk forward
- Charging zones
- Part of Camden sits inside the Congestion Charge zone and all of it is inside ULEZ
- Households (Belsize Park)
- 3,000
- Typical visit
- Half a day in NW3
Source: ONS Census 2021 via Nomis (TS008, TS041, TS007A, TS044, TS054, TS003), MSOA geography. Figures cover the ONS neighbourhood Belsize Park (E02000176) — the published geography that covers Belsize Park, not the whole borough. Neighbourhood names: House of Commons Library MSOA Names (OGL).
Questions
Camden flat-pack assembly questions
Per item and identical in every Camden postcode: from £35 for a bookcase, £45 a chest of drawers, £55 a bed frame, £75 a hinged wardrobe and £120 per 100cm of a modular wardrobe run. Half day £190, full day £340.
All 16 areas, each with its own page covering the housing stock, the wall construction that comes with it and what a two-metre box has to get through to reach the room. Camden's CPZs run seven days in parts of Kentish Town and Camden Town; narrow Hampstead lanes rarely take anything bigger than a Luton.
Yes, on every item designed to be restrained. We scan for cable and pipe, then use the fixing the wall genuinely needs — a stud screw in lath, a through-fixing on dot-and-dab, resin in soft brick, a screwbolt in concrete — and load-test it before leaving.
Yes. Void turnarounds, furnished-let packs and student handovers are handled with photographs on completion, an itemised invoice per property and one contact for a portfolio. We can attend with keys from the agent.
Where a visitor permit or a bay suspension is needed we arrange and pay for it with London Borough of Camden, and the cost is already inside your quote. Our vans are ULEZ compliant and the Congestion Charge is on us where it applies.
Yes — £5m public liability, DBS-checked fitters, and photographs of every anchored unit on completion. If a fixing we installed fails we come back and put it right.
Source: ONS Census 2021, borough totals via Nomis (table TS008, TS041, TS007A, TS044, TS054, TS003). Figures describe the whole borough, the smallest area ONS publishes every one of these tables for.
Book flat-pack assembly in Camden
Send the item list or a photo of the delivery stack for a fixed written price the same working day. Anchoring hardware, permits and taking the packaging away are already in the figure.
What customers say about IKEA and flat-pack assembly
3.9 ★ from 1,408 Google reviewsI'm answering on behalf my wife who was & still is in hospital & can't get wifi , Your two gentlemen were absolutely brilliant very impressed with the results I'm hoping my wife will be home soon so she can see the results before I make a mess when I come from the garden. Eric… Read in full →
Quoted verbatim from reviews customers left on our public Google and Trustpilot profiles. Nothing is edited, shortened beyond the link above, or written by us.