Carpet fitting in Timperley

Single room starts at from £129 and stairs with winders and landing is from £249. The price is set by the floor area, the number of stairs and whether the old carpet is being lifted and fixed in writing before we travel. Rates are identical across WA15 — postcode never changes the figure.

86% of Timperley bookings are offered a same or next-day slot. Send photos and the details before midday and there is usually someone with you that afternoon, with the visit length agreed up front.

Almost always, with the right method. Local walls are cavity brick with the inner leaf taking the load, plus stud partitions upstairs that need a joist detector first, so the substrate is scanned and tested first and the fixing chosen to suit. A standard Timperley job takes around 165 minutes.

Both. Most customers buy their own and we fit it; if you would rather we sourced it, send the room sizes and we will quote the carpet, underlay and fitting as one figure. Nothing changes for Timperley — Trafford rates are identical.

Yes. Winders are cut and fitted individually rather than folded round, which takes longer but is the only way the treads sit tight and wear evenly. That holds across WA15 at one fixed price.

Yes, along with the underlay, gripper and nails, disposed of through a licensed carrier with a waste transfer note if you need one. The same answer applies to every Timperley booking.

Most Timperley homes have 1930s tongue-and-groove boards over joists downstairs with a solid hearth, and boards upstairs that have been lifted for rewiring. Before any gripper goes down we do the prep that floor needs: boards re-fixed and punched, hardboard overlay across the bay where the floor dips, and the hearth edge trimmed so the gripper sits square. Prep is quoted on the survey with a price, not added on the day.

Typical here is a straight flight with a quarter turn onto a half-landing and a spindled balustrade to cut around at every spindle. Straight treads are stretched and folded off one length; winders and open risers are templated, cut and stitched individually so the pile direction stays consistent down the flight and the nosings hold their shape.

Bay-fronted lounges running 3.8–4.4m including the bay, which pushes the wider ones onto a 5m roll to stay seam-free. Standard broadloom comes in 4m and 5m widths, so we measure on the survey and tell you before you buy whether the room fits seam-free — and if a seam is needed, where it will fall.

For this stock we specify 10mm PU foam in the reception rooms with crumb rubber on the flight and half-landing where the turn takes the wear. Underlay does most of the work for warmth, step and how long the pile stays upright, so it is matched to the floor and the traffic rather than sold as one grade for the whole house.