Wallpaper hanging in Castleton

Almost always, with the right method. Local walls are original mill walls a foot or more thick, so fixings are long, drilled slowly and set into brick rather than joint, so the substrate is scanned and tested first and the fixing chosen to suit. A standard Castleton job takes around 135 minutes.

Access here is typically a booked visitor bay or loading bay with the concierge told to expect us, and boards taken up in the lift rather than the stairwell. Rochdale Council controls parking in OL11, so any permit or visitor bay is arranged before the visit and included in the quoted price — never added afterwards.

Feature wall (one wall, plain or small repeat) starts at from £129 and standard room (four walls) is from £349. The price is set by the wall area, the pattern repeat and how much preparation the surface needs and fixed in writing before we travel. Rates are identical across OL11 — postcode never changes the figure.

We do everything that can be done, photograph the problem with the part reference and tell you exactly what is needed. Returning to finish carries no second call-out charge in Castleton.

On older or patched plaster, usually yes. It evens the surface, stops the finish paper telegraphing every imperfection and gives a far better result under both paper and paint. The same answer applies to every Castleton booking.

Send us the wall dimensions and the pattern repeat and we will work it out, adding the usual allowance. Ordering from the same batch matters — shades shift between print runs. Nothing changes for Castleton — Rochdale rates are identical.

Most Castleton homes have original lath and plaster on the internal walls with solid brick on the external returns, often out of plumb by 10–20mm over a full drop. Before the first drop we do the prep that substrate needs: loose plaster cut back and filled, hollow lath sections re-fixed or overboarded, then cross-lined with 1400-grade lining paper so the finished paper sits flat instead of telegraphing every ripple. Lining is quoted where it genuinely improves the finish rather than as a default extra, and we tell you on the survey either way.

Typical here is 2.6–3.0m ceilings, so a standard 10m roll gives three drops rather than four and pattern-repeat waste has to be priced in before you buy. Roll count is wall width divided by roll width, then drops per roll set by your pattern repeat — a 52cm-wide, 10.05m roll with a 64cm offset repeat usually yields three usable drops in Castleton. We calculate it on the survey and give you the number before you buy.

Older solid walls with a history of penetrating or rising damp — we test with a meter and hold off papering until readings are down, because paper over damp will always lift at the seams. We meter-test any suspect wall on the visit and will not paper over an active problem — paper hung on a damp wall lifts at the seams within weeks, and the repaper costs more than the fix.